1 / 17

Lecture 17

Lecture 17. Today: Start Chapter 9 Next day: More of Chapter 9. Example. Chemical Engineer is interested in maximizing yield of a process 2 variables influence process yield: reaction time (x 1 ) and reaction temperature (x 2 )

faith
Download Presentation

Lecture 17

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Lecture 17 • Today: Start Chapter 9 • Next day: More of Chapter 9

  2. Example • Chemical Engineer is interested in maximizing yield of a process • 2 variables influence process yield: • reaction time (x1) and reaction temperature (x2) • Current operating conditions have reaction time at 35 minutes and temperature at 155 oF, which give a yield of about 40% • Best operating conditions may be far from current conditions

  3. Response Surface Methods • Often the goal of experimentation is to optimize (say maximize) a system response • When there are only a few quantitative factors, response surfacemethodology can be use for understanding the relationship between the response and input factors • Experimentation strategy is sequential

  4. Models • Relationship between input variables and response: • If the expected response is denoted E(y)=f(x1, x2,…, xk), then f(x1, x2,…, xk) is called the response surface

  5. Models • First order model to approximate f: • Second order model to approximate f: • Typically a lower order polynomial is used to approximate the local response surface

  6. General Idea • If there are many factors to consider, perform a screening design first (e.g., 2k-p fractional factorial design) to screen out unimportant factors • Response surface methodology involves experimentation, modeling, data analysis and optimization • First run a sequence of small experiment designs to fit a first order model to identify the experiment region that is near or contains the optimum • Next an experiment design is performed to estimate the second order model close to the optimum • Designs to estimate the response surface are called response surface designs

  7. General Idea • Design that estimates a first order model is called a first order design • Design that estimates a second order model is called a second order design • Analysis is performed using regression

  8. Coding the Variables • It is convenient to code the variables (as we have done so far) • For example consider a factor with 3 equally spaced levels • Let zi be the mid-point of the levels • The 3 levels are: Z: zi-c, zi, zi+c • Transformation: • 3 coded levels: X: -1, 0, 1

  9. First Order Designs • Will run a series of first order designs until near the optimum • When there is substantial curvature, first order model becomes ineffective for approximating the surface • How do we know if there is curvature?

  10. First Order Designs • Must have more than 2 level factors to check for curvature • Solution is to add experiment trials at the center of the experimental region (e.g., x=(0,0,0,0…0) ) • Designs combine factorials and center points

  11. Example • Engineer decide that reaction time should be investigated in the area of the operating conditions • time = 35 minutes (z1=30 or 40) • temperature = 155 oF (z2=150 or 160) • Will include center points at the current operating conditions • Coded variables:

  12. Example • Design and responses:

  13. Curvature Check • Have nftrials at the factorial design points (e.g., -1 and +1 combinations) • Have nctrials at the center point • Motivation for test: • Test:

  14. Example • Fit regression line to data, include a quadratic term for curvature check

  15. Method of Steepest Ascent (climbing the hill) • Linear effects for first order model estimated by least squares: • Take partial derivative with respect to each variable: • Direction of steepest ascent:

  16. Method of Steepest Ascent • Several experiment trials are taken along the line from the center point of the design, in the direction of the steepest ascent until no further increase is observed • The location where the maximum has occurred is the center point of the next first order design • Design should have nctrials at the center point • If curvature is detected, augment the design with additional trials so that the second order model can be estimated

  17. Method of Steepest Ascent

More Related