1 / 12

Nodal Analysis

Nodal Analysis. Introducing Supernodes!!!. Nodal Analysis. Nodal Analysis provides a general procedure for analyzing circuits using node voltages as the circuit variables.

fai
Download Presentation

Nodal Analysis

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Nodal Analysis Introducing Supernodes!!!

  2. Nodal Analysis • Nodal Analysis provides a general procedure for analyzing circuits using node voltages as the circuit variables. • Choosing node voltages instead of element voltages as circuit variables is convenient and reduces the number of equations one must solve simultaneously.

  3. Nodal Analysis • In nodal analysis, we are interested in finding the node voltages. • The number of non-reference nodes is equal to the number of independent equations that will be derived. • Given a circuit with n nodes without voltage sources, the nodal analysis of the circuit involves taking the following steps:

  4. Nodal Analysis • 1. Select a reference node. Assign voltages v1, v2, … , vn-1 to the remaining n-1 nodes. The voltages are referenced with respect to the reference node. • 2. Apply KCL to each of the n-1 non-reference nodes. Use Ohm’s Law to express the branch currents in terms of node voltages. • 3. Solve the resulting simultaneous equations to obtain the unknown voltages. • The number of non-reference nodes is equal to the number of independent equations that will be derived.

  5. Nodal Analysis with Voltage Sources • Case 1: If a voltage source is connected between the reference node, simply set the voltage at the non-reference node equal to the voltage of the voltage source.

  6. Nodal Analysis with Voltage Sources (cont.) • Case 2: If a voltage source (dependent or independent ) is connected between two non-reference nodes, the two nodes form a supernode. • Apply both KCL and KVL to determine the node voltages.

  7. Supernodes • We treat supernodes differently because nodal analysis uses KCL, and there is no way of knowing the current through a voltage source in advance.

  8. Note the properties of a supernode: The voltage source inside the supernode provides a constraint equation needed to solve for the node voltages A supernode has no voltage of its own A supernode requires the application of both KCL and KVL Supernodes (cont.)

  9. Examples 1. Select a reference node: ground 2. Label your non-reference nodes

  10. Examples 3. Apply KCL to your non-reference nodes 4. Use Ohm’s Law to write your KCL equations in terms the node voltages. 5. Solve the resulting equations for the voltages.

  11. Examples Case 1: If you have a voltage source connected between a reference node and a non-reference node, set the voltage at the non-reference node to the value of the voltage source. V1 = 10 V

  12. Examples Case 2: If you have a voltage source connected in between two non-reference nodes, you have to apply both KCL and KVL to determine the node voltages.

More Related