1 / 17

Lab. 4 Sampling and Rate Conversion Sampling:

Lab. 4 Sampling and Rate Conversion Sampling: The Fourier transform of an impulse train is still an impulse train. Then,. x s (t). x(nT). x(t). x. * An impulse is an analog signal. Spectrum: Reconstruction:. Sampling. x s (t). x(nT). x(nT). Ideal LPF. x.

fadey
Download Presentation

Lab. 4 Sampling and Rate Conversion Sampling:

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Lab. 4 Sampling and Rate Conversion • Sampling: • The Fourier transform of an impulse train is still an impulse train. • Then, xs (t) x(nT) x(t) x * An impulse is an analog signal.

  2. Spectrum: • Reconstruction: Sampling xs (t) x(nT) x(nT) Ideal LPF x

  3. Practical reconstruction device (DAC):

  4. Practical sampling device (ADC): * FLASH ADC

  5. Ramp counter ADC:

  6. Successive approximation ADC: * Tree search

  7. Downsampling: • Let m=i+kM and we have Xd(n)= x(Mn) x(n) 

  8. Spectrum: • To avoid aliasing, a filter is generally applied before the downsampling operation. • Upsampling: i=1 i=1 i=0 i=0 i=0 Xd(n)= x(Mn) x(n) LPF Cutoff=/M  Gain=1 Xu(n)= x(n/L) x(n) 

  9. The spectrum: Ideal LPF

  10. The upsampling process is then equivalent to increase the sampling rate by a factor of L. • The filtering operation is also known as interpolation. Gain=L Xu(n) x(n) LPF Cutoff=/L 

  11. Practice 1: • Generate a sinusoidal signal, downsample the signal, and observe the its spectrum. • Determine the maximum downsampling rate such that the aliasing will not occur. • Then upsample the downsampled signal, and observe its spectrum.

  12. General filter design: • Pass band • Stop band • Transition band • Passband ripple/stopband ripple A lowpass filter

  13. The analog filter design (IIR): • 1. Butterworth, 2. Chebychev I, 3. Chebychev II, 4. Ellipic

  14. Fdatool in Matlab:

  15. Practice 2: • Generate a sinusoidal signal, downsample the signal (no aliasing), and then upsample the downsampled signal. • Design an FIR LPF and let the upsampled signal pass the filter such that the upsampled signal is similar to the original signal. • Calculate the MSE of these two interpolation schemes.

  16. Practice 3: • Create an random digital signal and upsampled it with a selected factor. • Observe the spectrum of the upsampled signal. • Reading assigment: • Pulse shaping (CS: 4.5) • RC, SRRC

  17. Filter design(FDA tool) • Key “fdatool” in the console of MATLAB • Adjust parameters for your requirement • Press “Filter coefficients” to get filter time-domain response h[n] • Convolve h[n] in your C program to implement lowpass filtering • Plot spectrum in MATLAB • Plot( abs( fft( x ) ) ) • fft(): Fast Fourier Transform, frequency interval is [0 fs] • abs(): get magnitude

More Related