1 / 11

Juniper JNCIP-SP JN0-663 Practice Test Questions

We are quite confident that with PassQuestion Juniper JNCIP-SP JN0-663 Practice Test Questions you will get everything that you need to pass the final exam with flying colors.

examquestionsonline
Download Presentation

Juniper JNCIP-SP JN0-663 Practice Test Questions

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. JN0-663 JN0-663 P Practice Exam ractice Exam Service Provider Routing and Switching, Professional Service Provider Routing and Switching, Professional (JNCIP-SP) (JNCIP-SP) https://www.passquestion.com/JN0-663.html https://www.passquestion.com/JN0-663.html

  2. Download valid JN0-663 Practice Exam From PassQuestion Download valid JN0-663 Practice Exam From PassQuestion 1.Which two statements regarding Ethernet segments (ES) are correct? (Choose two) A. The Type-1 EVPN route will indicate if the ES is all-active or single-active. B. The Type-4 EVPN route will be used to elect the designated forwarder for the ES. C. The Type-2 EVPN route will indicate if there is a designated forwarder on the ES. D. The Type-3 EVPN route will be used for the aliasing function to load-balance to the ES Answer: A,C

  3. Download valid JN0-663 Practice Exam From PassQuestion Download valid JN0-663 Practice Exam From PassQuestion 2.You are asked to configure a series of interface policers and firewall filters, which include policers, on the same device You must ensure that the two configuration methods do not conflict. What are two considerations when performing this task? (Choose two.) A. On inbound traffic, interface policers are applied before firewall filters. B. On inbound traffic, firewall filters are applied before interface policers. C. On outbound traffic, interface policers are applied before firewall filters. D. On outbound traffic, firewall filters are applied before interface policers. Answer: A,D

  4. Download valid JN0-663 Practice Exam From PassQuestion Download valid JN0-663 Practice Exam From PassQuestion 3. You are creating an LDP-signaled Layer 2 circuit between two sites. Site1 and Site 2 use different VLAN IDs to connect to your PE devices In this scenario, which enca psulation type must be used on the logical interfaces? A. vlan-bridge B. vlan-ccc C. vlan-tcc D. vlan-vpls Answer: C

  5. Download valid JN0-663 Practice Exam From PassQuestion Download valid JN0-663 Practice Exam From PassQuestion 4.Which two statements about IS-IS are correct? (Choose two.) A. Level 1 intermediate systems exchange routing information with Level 1 intermediate systems in other IS-IS areas. B. An IS-IS router sets the attached bit in the PDUs it sends to a Level 1 area to indicate that it is a backbone router. C. A Level 1 router can only form adjacencies with other Level 1 routers. D. Level 2 routers can form adjacencies with either Level 1 or Level 2 routers. Answer: B,C

  6. Download valid JN0-663 Practice Exam From PassQuestion Download valid JN0-663 Practice Exam From PassQuestion 5.You are responsible for configuring CoS for your network Your network includes a video application with strict latency requirements, so that any p ackets delayed by more than 75 ms are effectively useless. You want to ens ure that you do not waste buffer space. When configuring the scheduler for this application, which feature would you use? A. exact B. remainder C. rate limit D. temporal Answer: D

  7. Download valid JN0-663 Practice Exam From PassQuestion Download valid JN0-663 Practice Exam From PassQuestion 6. The link between CE1 and PE1 has a history of flapping To avoid the impact that flapping cau ses to the network you decide to use route damping Which statement is correct in this scenario? A. Dampened routes decay at a sliding rate known as half-life B. Routes become dampened when the configured max-suppress value is reached C. Dampening is enabled on interfaces D. Dampened routes become active when their figure of merit drops below the reuse value. Answer: A

  8. Download valid JN0-663 Practice Exam From PassQuestion Download valid JN0-663 Practice Exam From PassQuestion 7. What information is stored in a VRF table for a BGP Layer 2 VPN? (Choose three.) A. Layer 2 encapsulation B. local site ID C. remote interface of local CE device D. logical interlace provisioned to local CE device E. label-switched path Answer: ABD

  9. Download valid JN0-663 Practice Exam From PassQuestion Download valid JN0-663 Practice Exam From PassQuestion 8. You want to allow the load balancing of traffic for an EBGP route from two different peers in the same AS. Which three actions are needed to accomplish this task? (Choose three.) A. A policy to load-balance traffic should be applied to the forwarding table B. At least two interfaces should be connected to the same EBGP neighbor C. The multihop parameter should be configured under protocols BGP D. The multipath parameter should be configured under protocols BGP E. An equal cost AS path for the route is required. Answer: A,D,E

  10. Download valid JN0-663 Practice Exam From PassQuestion Download valid JN0-663 Practice Exam From PassQuestion 9. What is the purpose of the duster-list attribute within a BGP route reflector group? A. to disable internal cluster re-advertisements B. to define the router that first advertised the route to the route reflector C. to override the router 10 value within the cluster D. to facilitate loop detection within the route reflector network Answer: D

  11. Download valid JN0-663 Practice Exam From PassQuestion Download valid JN0-663 Practice Exam From PassQuestion 10. You are deploying a new EVPN service for your customers. You must build the service based on the following requirements -- both Layer 2 and Layer 3 functionality must be supported -- your customers must be able to support multiple VLANs in the same EVPN instance (EVI). In this scenario which two types of routing instances should be configured? (Choose two.) A. VRF B. virtual switch C. virtual router D. EVPN Answer: AB

More Related