1 / 6

Objectives

Objectives. MAV. Objective 1. Design a MAV within the listed specifications. Objective 1 (Continued). The MAV will be designed based upon our team’s collective knowledge of the engineering process learned in class. We will make use of both Pro Engineer 3D models, as well as part sketches.

ewan
Download Presentation

Objectives

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Objectives MAV

  2. Objective 1 • Design a MAV within the listed specifications.

  3. Objective 1 (Continued) • The MAV will be designed based upon our team’s collective knowledge of the engineering process learned in class. • We will make use of both Pro Engineer 3D models, as well as part sketches.

  4. Objective 2 Design 3D Pro Engineer (Fuselage Above) Model Parts for MAV (Horizontal Stabilizer Above)

  5. Objective 3 • Flight. The MAV will be put to the test by maneuvering through an 8 figure obstacle course around two pylons separated by 50’ within 5 minutes. • Throughout the flight, the MAV must be able to acquire a legible image of four 1’x1’ targets.

  6. Objective 4 • Finish, analyze, and compile a final report based upon our results. This will also include what we have learned throughout the course, as well as a reflection on what could have been done better.

More Related