1 / 11

LHRS Optics Calibration Straight-through, good septum

LHRS Optics Calibration Straight-through, good septum. Min Huang 10 /23/2012. Straight-thru Optics. Settings Beam energy 2.253GeV 0T target field at 6 deg, Gep target magnet config Good septum Optics runs Full delta scan on both arms (-3%, -2%, 0, 2%, 3%). Straight-thru Optics.

evers
Download Presentation

LHRS Optics Calibration Straight-through, good septum

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. LHRS Optics CalibrationStraight-through, goodseptum Min Huang 10/23/2012

  2. Straight-thru Optics • Settings • Beam energy 2.253GeV • 0T target field at 6 deg, Gep target magnet config • Good septum • Optics runs • Full delta scan on both arms (-3%, -2%, 0, 2%, 3%)

  3. Straight-thru Optics • Used Tg_y instead of VertexZ • The previous problem perhaps comes from other material contamination, tried to select only carbon (elastic) events

  4. Steps Tried Dp vs. tg_y Dp vs. tg_th And a few other focal plane plots…

  5. Matrix Calibration • Jin suggested look at these plots with part of the acceptance, since it’s a multi-dimension problem • Cut each hole, and looked at dp vs. target phi/y/theta plots • Then decided to use dp vs. target theta

  6. Steps of cuts Tg_y vs. Tg_phvetex cut for the whole run Cut on each hole These two are from #3181 dp=-3%

  7. Steps of cut 3. Cut carbon elastic for each hole These two are from #3181 dp=-3%

  8. Matrix Angle Calibration

  9. Matrix Dp calibration

  10. Next • Any suggestions from this meeting • Looks good enough to me, a good base for more realistic situations later

  11. Backup Focal plane x vs. y

More Related