1 / 10

VLSM Variable Length subnet masks

VLSM Variable Length subnet masks. Subnetting the subnet. IP Address Design Example. Company with 200 hosts Assigned class C network 195.10.1.0/24 Want 6 different LANs Subnet class C network using mask 255.255.255.224 (/27)

espen
Download Presentation

VLSM Variable Length subnet masks

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. VLSMVariable Length subnet masks Subnetting the subnet RD-CSY2001-2008/09

  2. IP Address Design Example • Company with 200 hosts • Assigned class C network 195.10.1.0/24 • Want 6 different LANs • Subnet class C network using mask 255.255.255.224 (/27) • Whole network has the same subnet mask or supports equal number of hosts on all the sub-networks • Is this a problem? • Why? • What should be done to solve it ? RD-CSY2001-2008/09

  3. VLSM (Variable Length Subnet masks) • VLSM Subnets a subnet • VLSM divides a network into subnets of various sizes to prevent wasting IP addresses • Uses up wasted addresses • Conserves address space on WAN links • Point-to-point link only needs 2 addresses • With VLSM point-to-point links can use a /30 mask RD-CSY2001-2008/09

  4. VLSM • Variable Length Subnet Masking allows division of address space based on the size of networks • Start with network requiring the most addresses • Create a subnet mask • (use CIDR – Classless Inter Domain Routing) • Subnet the subnet as needed to provide address space required for other subnets • Be logical – start at beginning or end or address space • Addresses must be contiguous to enable route summarization RD-CSY2001-2008/09

  5. Task Question • If an ISP has a 200.1.1.0 Network, he wants to give assign to 5 customers who need 20, 12, 6, 25, 18 hosts. • What should the subnet mask be? • What is the address range in each subnet? • What should the routing table entries be? • Can it be done efficiently to conserve IP addresses? RD-CSY2001-2008/09

  6. VLSM - example RD-CSY2001-2008/09

  7. RD-CSY2001-2008/09

  8. CIDR: Classless Inter-Domain Routing • Address format <IP address/prefix P>. • The prefix denotes the upper P bits of the IP address. • Can be used to specify arbitrary blocks of addresses • Say an ISP has 192.5.48.0, 192.5.49.0,192.5.50.0,192.5.51.0 then • the IP address advertised will be 192.5.48.0/22 • An ISP can obtain a block of addresses and partition this further to its customers • Say an ISP has 200.8.4/24 address (256 addresses) • He has another customer who needs only 4 addresses from 200.8.4.24 then that block can be specified as 200.8.4.24/30 RD-CSY2001-2008/09

  9. Task Given IP address 204.15.5.0/24, use VLSM to create a subnetting scheme RD-CSY2001-2008/09

  10. Additional Tasks Please try other questions on VLSM, available on module web page RD-CSY2001-2008/09

More Related