1 / 13

Voltage Translation Clamps

Voltage Translation Clamps. Standard Logic. ASIA MARKETING DEVELOPMENT Samuel Lin s-lin9@ti.com. 2012/Q1. Advantage With Voltage Clamp. High Speed Translation Direction Control Unnecessary Low Ron for less distortion With 5V Supply, it can level shift 1V to 5V range on the Input/Outputs

eryk
Download Presentation

Voltage Translation Clamps

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Voltage Translation Clamps Standard Logic ASIA MARKETING DEVELOPMENT Samuel Lin s-lin9@ti.com 2012/Q1

  2. Advantage With Voltage Clamp • High Speed Translation • Direction Control Unnecessary • Low Ron for less distortion • With 5V Supply, it can level shift 1V to 5V range on the Input/Outputs • Bi-directional I2C™ Translation. • GTL to TTL/LVTTL Translation • Open Drain/Push Pull Interface

  3. TVC Structures #1 VCC=5V 200k A IO : non-open drain B IO : non-open drain VREF A1 B1 VPullup Output 0 V to VREF(no pullup) 0V to Vpullup(pull up) Input 0 V to VREF(no pullup) 0 V to Vpullup(pull up) Input: 0V to 5V Output 0V to VREF(no pullup) A2 B2

  4. TVC Structures #2 VCC=5V 200k A I/O : non-open drain B I/O : open drain VREF A1 B1 VPullup Output 0 V to Vpullup Input 0 V to Vpullup Input: 0V to 5V Output 0V to VREF A2 B2

  5. TVC Structures #3 VCC=5V 200k A I/O : open drain B I/O : non-open drain VREF A1 B1 VPullup Vref Output 0 V to VREF(no pullup) 0V to Vpullup(pull up) Input 0 V to VREF(no pullup) 0 V to Vpullup(pull up) Input: 0V to VREF Output 0V to VREF A2 B2

  6. TVC Structures #4 VCC=5V 200k A I/O : open drain B I/O : open drain VREF A1 B1 VPullup Vref Output 0 V to Vpullup Input 0 V to Vpullup Input: 0V to VREF Output 0V to VREF A2 B2

  7. Flexible Bi-Direction

  8. Typical Design Examples • Passive Bi-Directional Translator Clamps. • Pin “Gate” must use 200k Pull Up to Vcc, which must be higher than VREF minimum 1V to turn on the FET. • VREF would cut-off all A-Port Output to maximum level. • A-Port has 5V input tolerant,need pull up • when open drain • B-Port is flexible to desired Logic Voltage Level which depends on pull up Vcc.

  9. Up-Unique Direction

  10. Example of Unique Up Translator VCC=3.3V VCC=3.3V 200k 200k 1.2V 1.2V A1 B1 A1 B1 Clamp to 3.3V 3.3V 1.2V 1.2V 3.3V A2 CMOS LOGIC B2 A2 OPEN DRAIN B2 1.2V CMOS to 3.3V CMOS/Open DRAIN 1.2V CMOS to 3.3V CMOS

  11. Down-Unique Direction

  12. Example of Unique Down Translator VCC=3.3V VCC=3.3V 200k 200k 1.2V 1.2V A1 B1 A1 B1 3.3V 3.3V Clamp to 1.2V 1.2V 3.3V A2 CMOS LOGIC B2 A2 OPEN DRAIN B2

  13. Thanks

More Related