1 / 22

CHEM1612 - Pharmacy Week 11: Kinetics - Half Life

CHEM1612 - Pharmacy Week 11: Kinetics - Half Life. Dr. Siegbert Schmid School of Chemistry, Rm 223 Phone: 9351 4196 E-mail: siegbert.schmid@sydney.edu.au. Unless otherwise stated, all images in this file have been reproduced from:

erwin
Download Presentation

CHEM1612 - Pharmacy Week 11: Kinetics - Half Life

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. CHEM1612 - PharmacyWeek 11: Kinetics - Half Life Dr. SiegbertSchmid School of Chemistry, Rm 223 Phone: 9351 4196 E-mail: siegbert.schmid@sydney.edu.au

  2. Unless otherwise stated, all images in this file have been reproduced from: Blackman, Bottle, Schmid, Mocerino and Wille,Chemistry, John Wiley & Sons Australia, Ltd. 2008      ISBN: 9 78047081 0866

  3. Rate Law and Reaction Order For the general reaction: a A + b B + c C … d D + e E …. rate = k [A]m[C]n • k rate constant (depends only on temperature) • m is the order of the reaction with respect to A (or “in” A), • n is the order of the reaction with respect to C • Overall order of the reaction is = m + n • Reaction orders cannot be deduced from the balanced reaction, but only by experiment.

  4. Interpreting Rate Laws Rate = k [A]m[B]n[C]p • If m = 1, reaction is 1st order in A Rate = k [A]1 If [A] doubles, then rate goes up by a factor of ? • If m = 2, reaction is 2nd order in A. Rate = k [A]2 If [A] doubles, then rate goes up by a factor of ? • If m = 0, reaction is zero order in A. Rate = k [A]0 If [A] doubles, then rate goes up by a factor of ? 2 4 1

  5. Using Data to Determine Order Consider the reaction: ClO3-(aq) + 9 I-(aq) + 6 H+(aq) Cl-(aq) + 3 I3-(aq) + 3 H2O(l) Expt.[ClO3-] / M [I-] / M [H+] / M Initial Rate / M s-1 1 0.10 0.10 0.10 0.05 2 0.20 0.10 0.10 0.10 3 0.20 0.20 0.10 0.20 4 0.20 0.20 0.20 0.80 Determine the rate law for the above reaction. General expression: Rate = k [ClO3-]x[I-]y[H+]z; must find x, y, and z

  6. Using Data to Determine Order in ClO3- Expt. [ClO3-] / M [I-] / M [H+] / M Initial Rate / M s-1 1 0.10 0.10 0.10 0.05 2 0.20 0.10 0.10 0.10 3 0.20 0.20 0.10 0.20 4 0.20 0.20 0.20 0.80 General expression: Rate = k [ClO3-]x [I-]y [H+]z Determine x: • Compare experiment 1 and 2

  7. Using Data to Determine Order in I- Expt. [ClO3-] / M [I-] / M [H+] / M Initial Rate / M s-1 1 0.10 0.10 0.10 0.05 2 0.20 0.10 0.10 0.10 3 0.20 0.20 0.10 0.20 4 0.20 0.20 0.20 0.80 General expression: Rate = k [ClO3-]x [I-]y [H+]z Determine y: • Compare experiment 2 and 3

  8. Using Data to Determine Order in H+ Expt. [ClO3-] / M [I-] / M [H+] / M Initial Rate / M s-1 1 0.10 0.10 0.10 0.05 2 0.20 0.10 0.10 0.10 3 0.20 0.20 0.10 0.20 4 0.20 0.20 0.20 0.80 General expression: Rate = k [ClO3-]x [I-]y [H+]z Determine z: • Compare experiment 3 and 4 So overall the rate law is: Rate = k [ClO3-] [I-] [H+]2

  9. Determine the Rate Constant ClO3-(aq) + 9 I-(aq) + 6 H+(aq) Cl-(aq) + 3 I3-(aq) + 3 H2O(l) rate= k [ClO3-][I-][H+]2 The order is 1 with respect to [ClO3-] The order is 1 with respect to [I-] The order is 2 with respect to [H+] The overall order of the reaction is (1+1+2)= 4. Calculate the rate constant, k 0.05 M s-1 = k (0.10 M)(0.10 M)(0.10 M)2 k = 5.0 x 102 M-3 s-1 (note: units depend on rate law)

  10. Deriving Rate Law and Rate Constant From the following experimental data derive rate law and k for the reaction: CH3CHO(g)  CH4(g) + CO(g)

  11. Deriving Rate Law and Rate Constant Rate law is: rate = k [CH3CHO]2 Here the rate goes up by a factor of four when initial concentration doubles. Therefore, this reaction is second order. Now determine the value of k. From experiment #3 data: 0.182 mol/L·s = k (0.30 mol/L)2 k = 0.182 / (0.3)2 = 2.0 (L / mol·s) Using k you can calculate the rate at other values of [CH3CHO] at same T.

  12. Homework Determine the rate equation and value of the rate constant for this reaction NO2 (g) + CO (g)  NO (g) + CO2 (g) [NO2] / M [CO] / M Initial Rate / M s-1 1 0.10 0.10 0.0051 2 0.40 0.10 0.080 3 0.10 0.20 0.0052 Homework Rate = k[NO2]2 k = 0.5 s-1 M-1

  13. The Iodine Clock • Mix different amounts of HIO3 + NaHSO3 + starch. • Concentration of reactants is: [beaker I] > [beaker II] >[beaker III]. • The following reactions take place consecutively in each beaker: • Starch forms a blackish blue complex with iodine. As the final reaction is the fastest, the colour of the elemental iodine only becomes apparent once the sulphite is fully consumed. • The reaction is slowest in the solution with the lowest concentration, as the reaction time is dependent on the concentration. + starch Blue-Black complex

  14. Concentration - Time Relationships How long will it take for x moles of A to be consumed? What is the concentration of reactant as function of time? For FIRST ORDER REACTIONS the rate law is For infinitesimal differences, Δ /Δt becomes a differential, so Integrating both of the expression , gives:

  15. First Order Reactions Integrating gives [A]t =conc. of A at time = t during exp [A]0 =conc. of A at time t = 0 k = rate constant t = time Called the integrated first-order rate law. [A]t / [A]0 = fraction remaining after time t has elapsed.

  16. Second Order Reactions • For a second-order reaction, with one reactant A only: Integrating both sides gives: [A]t =conc. of A at time = t during exp [A]0 =conc. of A at time t= 0 k = rate constant t= time

  17. Zero Order Reactions • For a zero order reaction: Integrating gives [A]t = [A]0 – k t [A]t =conc. of A at time = t during exp [A]0 =conc. of A at time t= 0 k = rate constant t= time

  18. Identifying reaction order FIRST ORDER SECOND ORDER ZERO ORDER [A]t = [A]0 – k t ln[A]t = -k t + ln[A]0 Figure from Silberberg, “Chemistry”, McGraw Hill, 2006.

  19. What happened to Giant Kangaroos? Radiocarbon Dating • 14C 12C occurs at a known rate. • How old is bone if 14C conc. only 9% of natural conc. and k = 1.21 x 10–4yr–1 ?

  20. Half-life • Half-life: time required for concentration of reactant to decrease to half of its original concentration. • Half-life for a first-order reaction is independent of initial concentration. Expression for half-life: t1/2 = 0.693 / k

  21. Half-life Example • 90Srwas released during theChernobyl explosion in1986. Givent1/2 (90Sr) = 28.1 y, what percentage remains today?

  22. Summary CONCEPTS • Reaction rate as change in concentration of reactants and products • Rate law • Reaction order • Integrated rate laws for first, second, and zero order reactions • Half-life relations CALCULATIONS • Calculate average and instantaneous rates from data (with units) • Derive rate law and rate constant from experimental data (with units) • Use integrated rate laws to calculate [A] at given times • Calculation using the half-life relations

More Related