1 / 24

Wind profilers and radio contamination issues

Wind profilers and radio contamination issues. Wind profiler - how it works - examples Frequency issues. Dominique Ruffieux MeteoSwiss Aerological Station of Payerne. Ground-based remote sensing system, active and passive. How a remote sensing system works ?. Emission.

eris
Download Presentation

Wind profilers and radio contamination issues

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Wind profilers and radio contamination issues • Wind profiler • - how it works • - examples • Frequency issues Dominique RuffieuxMeteoSwissAerological Station of Payerne

  2. Ground-based remote sensing system, active and passive How a remote sensing system works ?

  3. Emission An electromagnetic pulse is emitted towards the zenith and at least 2 15deg-tilted directions (North and West for ex.)

  4. Reception The intensity of the return signal by the atmosphere depends mainly on the humidity and on the thermal gradients within the atmosphere (Cn2)

  5. 1290 MHz , 6 degree beams 15 -29dBi 30 minutes

  6. Data acquisition

  7. 0 The frequency spectra obtained for each level are characterized by their moments: • Doppler shift • Spectral width • Noise level • Signal-to-noise ratio (SNR)

  8. 22.0 Signal processing 21.0 20.0 A succession of coherent averaging steps are followed by a Fast Fourier Transform (FFT) The result is a series of spectra defined for each level (heights) and each of the beams 19.0 18.0 17.0 16.0 15.0 14.0 13.0 12.0 11.0 Level 10.0 9.0 8.0 7.0 6.0 5.0 4.0 3.0 2.0 - + Frequency

  9. Wind profiler data use, examples • Operational - NWP assimilation - Weather forecast - Aeronautics - surveillance of special installations • Research - Urban climatology - Complex topography - Air pollution

  10. (1) Assimilation in real time in NWP models: - ECMWF - UK Met Office model - French model Aladin - German LM model - Swiss aLMo model - USA, Japan, ... Payerne, 23 May, 2005

  11. (2) Weather forecasting and nowcasting - winds - melting level - fog limit Payerne, 23 May, 2005 Payerne, 29 January, 1997

  12. (3) Aeronautics From METEO FRANCE

  13. Leibstadt - surface - profiles Schauffhausen - surface - profiles St.Chrischona - tower Beznau - surface Goesgen - surface Uetligerg - tower Wynau - surface - profiles Stockeren - tower Bantiger - tower Muehleberg - surface Payerne - surface - profiles N 0 30 km (4) Project for a new network for the surveillance of the Swiss nuclear power plants (including three 1290 MHz wind profilers)

  14. Research (1) Urban meteorology (BASEL) Evening (18-00 UTC)

  15. 6 November, 1999 (2) Complex topography (MAP)

  16. (3) Air pollution (NOAA/ETL) 13-14 LST

  17. EUMETNET WINPROFIISetting up of an operational wind profiler network in Europeincluding thirteen 1290 MHz systems (1 September 2005)

  18. Compatibility between GALILEO and wind profiler radars in the 1215-1300Mhz band GALILEO is the new European Satellite Navigation System • Satellite deployment 2006-2008, operational 2008, 3 x 10 satellites • E6 frequency: 1278.75 MHz, B/W: 40 MHz • E6 power level on the ground -122 dBm • How will this signal be seen by wind profiler radars ? • What are the best mitigation options ?

  19. Various studies in Europe performed within the Electronic Communication Committee (ECC-SE39 working group) • Finnisch/Vaisala report • Roke Manor report • Deutscher Wetterdienst report • Meteofrance report • final ECC report with mitigation proposals (in progress)

  20. (1) Interferences caused by GALILEO GALILEO signal simulation (DWD) • Coherent interferences • Incoherent interferences

  21. Coherent interferences (further testing are expected to confirm these results)

  22. A decrease of the NCI by a factor of 4 should result in an increase of the noise level of 6 dB Incoherent interferences

  23. (2) Main mitigation options currently in discussion • a minor frequency shift into GALILEO signal spectral minima (E6 null), • Increasing the number of beams • a modification of the beam sequence, • a major frequency shift of the wind profiler frequency. • In case no mitigation techniques would be efficient, the wind profiler community would recommend a shift of the wind profiler frequencies down to the 0.8 – 1.2 GHz band.

  24. Wind profilers are operational worldwide (Europe, USA, Australia, Japan, ..) Wind profilers are providing valuable information for both operational and research applications related to meteorology and climatology Low-tropospheric 1GHz systems performance will likely experience interference from the new GALILEO system Mitigation options are still currently under investigation Because of the high sensitivity of the wind profiler receiver, new types of contamination can be expected in the near future. Summary

More Related