1 / 18

Roofnet: High Performance Self-Installing Wireless Mesh Network

MIT Roofnet is a self-installing wireless mesh network that provides high-speed internet access to users. It has a range of 2km and can support up to 40+ users with a throughput of over 200 kilobits/second. The network is easy to install and configure, with an average installation time of 45 minutes. The mesh network outperforms access points and has a packet delivery probability of 5.5 packets/second. The network can handle multi-hop routes with minimal packet loss.

epperly
Download Presentation

Roofnet: High Performance Self-Installing Wireless Mesh Network

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. MIT Roofnet Performance Robert Morris Daniel Aguayo, John Bicket, Sanjit Biswas, Douglas De Couto http://pdos.lcs.mit.edu/roofnet

  2. Roofnet node map 1 kilometer

  3. Typical rooftop view

  4. Roofnet radio links 1 kilometer

  5. A Roofnet Self-Installation Kit 50 ft. Cable ($40) Low loss (3dB/100ft) Antenna ($65) 8dBi, 20 degree vertical Miscellaneous ($75) Chimney Mount, Lightning Arrestor, etc. Computer ($340) 533 MHz PC, hard disk, CDROM Software (“free”) Our networking software based on Click 802.11b card ($155) Engenius Prism 2.5, 200mW Total:$685 Takes a user about 45 minutes to install on a flat roof

  6. Roofnet Node Software sshd apache dhcpd User-space Linux Kernel Linux TCP/IP ETX NAT antenna srcrr Click 802.11 eth Living-room ethernet

  7. Roofnet link quality distribution 1 megabit/second Packet Delivery Probability 11 mbits/sec Node Pair

  8. S/N vs loss w/ cable + attenuator

  9. S/N vs loss for Roofnet links

  10. Transmit bit-rate choice 11 megabits/second 5.5 Packets/second received 2 1 Node Pair

  11. Basic Roofnet performance

  12. Multi-hop packet loss?

  13. What is a typical radio range? Delivery probability Distance (Meters)

  14. Effect of transmit power level

  15. Would a less-dense mesh work? • Roofnet is about twice as dense as it needs to be • Higher densities provide higher throughput

  16. Mesh versus access points • 5 APs are required for full connectivity • N mesh gateways give higher throughput than N APs

  17. Conclusions • Roofnet provides Internet access to 40+ users • Easy for users to install, self-configuring • Throughput > 200 kilobits/second for most users • Even 9-hop routes average 150 kilobits/second • Radio range up to 2km, density 10 nodes/km2 • Hard to beat mesh performance w/ access points • Multi-hop packet loss costs about a factor of two

  18. How reliant on the “best” nodes? Average Throughput (KB/s) Number of Best Nodes Eliminated

More Related