1 / 43

RADIATIVE PROPERTIES OF REAL MATERIALS

RADIATIVE PROPERTIES OF REAL MATERIALS. Electromagnetic Theory: ▪ ideal, optically smooth surface ▪ valid for spectral range larger than visible Real Materials: surface condition ▪ contaminants or oxides ▪ surface roughness ▪ thin coating on substrate.

emma-hinton
Download Presentation

RADIATIVE PROPERTIES OF REAL MATERIALS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. RADIATIVE PROPERTIES OF REAL MATERIALS • Electromagnetic Theory: • ▪ ideal, optically smooth surface • ▪ valid for spectral range larger than • visible • Real Materials: surface condition • ▪ contaminants or oxides • ▪ surface roughness • ▪ thin coating on substrate

  2. Material Dependence • ▪ opaque nonmetals • ▪ opaque metals • ▪ selective and directional opaque • surfaces • ▪ selectively transparent materials • Parameter Dependence • ▪ spectral and directional variations • ▪ variation with temperature • ▪ effect of surface roughness • ▪ effect of surface impurities

  3. Radiative Properties of Opaque Nonmetals Effect of Coating Thickness Emissivity of zinc oxide coatings on oxidized stainless steel substrate. Surface temperature, 880 ± 8 K

  4. Effect of Substrates Effect of substrate reflection characteristics on the hemispherical characteristics of a TiO2 paint film for normal incidence: Film thickness, 14.4 mm; volume concentration of pigment 0.017,

  5. Spectral Dependence Spectral reflectivity of paint coatings. Specimens at room temperature

  6. Normal spectral emissivity of some nonmetal samples.

  7. Variation with Temperature Effect of surface temperature on emissivity of dielectrics

  8. Effect of surface temperature on normal total emissivity of zirconium oxide

  9. Effect of Surface Roughness Bidirectional total reflectivity of typewriter paper in plane of incidence. Source temperature, 1178 K

  10. Bidirectional total reflectivity for visible lightin plane of incidence for mountainous regions of lunar surface

  11. constant q varies from 0° to 90° as the position of the incident energy varies from the center to the edge of the lunar disk uniform brightness: constant intensity reflected to earth Reflected energy at full moon

  12. Semiconductor Normal spectral emissivity of a highly doped silicon semiconductor at room temperature

  13. follow theoretical trend Radiative Properties of Metals Directional Dependence EM theory doesn’t hold at shorter wavelengths. Effect of wavelength on directional spectral emissivity of pure titanium. Surfaceground to 0.4 mm rms

  14. infrared region Spectral Dependence Peak e near the visible region gray body assumption Variation with wavelength of normal spectral emissivity for polished metals

  15. Peak appears near the visible region H-R relation holds 1.27 mm Effect of wavelength and surface temperature on hemispherical spectral emissivity of tungsten X point: iron,1.0 mm; nickel,1.5 mm; copper,1.7 mm; platinum,0.7 mm

  16. Hagen – Rubens Variation with Temperature Effect of temperature on hemispherical total emissivity of several metals and one dielectric

  17. approach to optically smooth surface follow theoretical trend Effect of Surface Roughness Precise definition of surface characteristics geometric shape, method of preparation, distribution of size around rms s0/l > 1: multiple reflection Roughness effects for small optical roughness, s0/l < 1; effect of surface finish on directional spectral emissivity of pure titanium. Wavelength, 2 mm

  18. behave more like a polished surface smoother relative to the incident radiation for large l Effects of roughness on bidirectional reflectivity in specular direction for ground nickel specimens. Mechanical roughness for polished specimen, 0.015 mm

  19. s0/l = 2.6 For large q, peak qr shifted to larger angles Off-specular reflection at larger rough-ness and incident angle Bidirectional reflectivity in plane of incidence for various incidence angles; material, aluminum (2024-T4), aluminum coated; rms roughness s0 = 1.3 mm; wavelength of incident radiation, l =0.5 mm

  20. 0.69 0.45 Effect of Surface Impurities Effect of oxide layer on directional spectral emissivity of titanium. Emission angle, q = 25°; surface lapped to 0.05 mm rms; temperature, 294 K.

  21. Effect of oxidation on normal spectral emissivity of Inconel X

  22. Effect of surface condition and oxidation on normal total emissivity of stainless steel type 18-8

  23. Effect of oxide coating on hemispherical total emissivity of copper

  24. Effect of oxide thickness on normal total emissivity of copper at 369 K

  25. At low source temperature, incident radiation in long wavelength region → Barely influenced by the thin oxide layer on the anodized surface →Acts like a bare metal Approximate directional total absorptivity of anodized aluminum at room temperature relative to value for normal incidence

  26. Hemispherical spectral reflectivity for normal incident beam on aluminum coated with lead sulfide. Coating mass per unit surface area, 0.68 mg/cm2

  27. Selective and Directional Opaque Surfaces Modification of Surface Spectral Characteristics lc: cutoff wavelength lc Characteristics of some spectrally selective surfaces

  28. Ex 5-1 arriving from the sun at Ts = 5780 K An ideal selective surface with a cutoff wavelength lc = 1 mm Energy balance : absorbed energy : emitted energy

  29. dw ib,s R = 6.95 × 108 m earth sun L = 1.50 × 1011 m TS = 5780 K

  30. arriving from the sun at Ts = 5780 K An ideal selective surface with a cutoff wavelength lc = 1 mm

  31. For diffuse irradiation

  32. For diffuse irradiation or

  33. Cutoff wavelengthlc, mm 0.6 0.8 1.0 1.2 1.5 ∞ Equilibrium temperatureTeq, K 1811 1523 1334 1210 1041 393 By trial and error

  34. approximation 0.95 0.05 1.5 • extracted energy for use in a power- • generating cycle • for the black surface at the same • temperature Ex 5-3 SiO-Al selective surface Wavelength l Solar energy absorber at TA = 393 K

  35. 0.95 0.05 1.5 approximation Energy balance SiO-Al selective surface Wavelength l For black surface No energy available

  36. reflect well at short wavelengths radiate well at long wavelengths Reflectivity of white paint coating on aluminum

  37. lc lc Selective Transmission ordinary glasses: typically two strong cutoff wavelengths Normal overall spectral transmittance of glass plate (includes surface reflection) at 298 K

  38. 1 r r3 (1-r)t3(1-t) r (1-r)t(1-t) (1-r)(1-t) r2(1-r)t2(1-t) A transmitting Layer with Thickness L >l r (1-r)2t2 r3 (1-r)2t4 1-r r2(1-r)t2 r3 (1-r)t4 r4 (1-r)t4 r (1-r)t2 (1-r)t r (1-r)t r2 (1-r)t3 r3 (1-r)t3 (1-r)2t r2 (1-r)2t3 Reflectance Transmittance

  39. 1 r r (1-r)2t2 r3 (1-r)2t4 1-r r2(1-r)t2 r3 (1-r)t4 r4 (1-r)t4 r (1-r)t2 r3 (1-r)t3(1-t) r (1-r)t(1-t) (1-r)(1-t) r2(1-r)t2(1-t) (1-r)t r (1-r)t r2 (1-r)t3 r3 (1-r)t3 (1-r)2t r2 (1-r)2t3 Absorptance R + T + A =1 spectral transmittance total transmittance

  40. Transmittance depends on thickness. 95% of solar energy can be trapped. Effect of plate thickness on normal overall spectral transmittance of soda-lime glass (includes surface reflection) at 298 K

  41. Emittance of sheets of window glass at 1000°C

  42. Selectively transparent coating may also be useful in the collection of solar energy. Transmittance and reflectance of 0.35-mm-thick film of Sn-doped In2O3 film on Corning 7059 glass. Also shown is the effect on Tl of an antireflection coating of MgF2

  43. Modification of Surface Directional Characteristics Directional emissivity of grooved surface with highly reflecting specular side walls and highly absorbing base; d/D = 0.649. Results in plane perpendicular to groove direction; data at 8 mm

More Related