1 / 16

Presentación Maquina PT 130

Presentación Maquina PT 130. Maquina SMI 250 Diseñada y Fabricada en los Estados Unidos de América. Características Estándar. Sistema de tintero cerrado Paneles metálicos reforzados Movimiento de fácil ajuste de Tampón Sistema cerrado de tinteros 1 ò 2 de 90mm ò 1 de 130mm

Download Presentation

Presentación Maquina PT 130

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Presentación Maquina PT 130

  2. Maquina SMI 250Diseñada y Fabricada en los Estados Unidos de América

  3. Características Estándar • Sistema de tintero cerrado • Paneles metálicos reforzados • Movimiento de fácil ajuste de Tampón • Sistema cerrado de tinteros 1 ò 2 de 90mm ò 1 de 130mm • Sistema de fácil limpieza • Sistema automático de ciclo para operación continua con un ajuste infinito • Ciclo de mezcla de tinta, para mantener mejor la viscosidad de la tinta en producción • Modo de ajuste para minimizar tiempo en la puesta en marcha de la maquina • Ajustes de distancias y centros de color a color • Regulador ajustable que agrega confiabilidad y facilidad en todos los movimientos y funciones del equipo • Tiempo de espera al imprimir y tiempo de retraso en secuencia continua son algunas de las muchas opciones programables disponibles en esta maquina • Flexibilidad de programación

  4. PLC Operation and Value Modification • Standard Machines Inc. SM-250 • PLC Operation and Value Modification • Data Memory Number • Move Cursor Left/Right • Increase Value • Decrease Value • Enter • Data Value • The SM-250 programmable logic controller (PLC) is a very powerful device and has been programmed using many features, which have been imbedded in the logic and are operator accessible. The following will describe these features and how to modify them. • The face of the PLC has a data window containing 2 lines of text and four buttons to the right arranged from top to bottom. The first line in the data window displays the current data memory location and the second line displays the current value for that data memory location. To change the current data memory location being viewed, simply use the increase or decrease buttons until the location desired is displayed. To change the current value of the data memory location being viewed, depress and hold the enter button until the left hand digit in the data value window starts flashing. Using the cursor left/right button, move the cursor (flashing) to the digit you wish to change. Use the increase or decrease button until the desired value is displayed. When the desired value is displayed, depress and hold the enter button until the new value is accepted.

  5. PLC Operation and Value Modification • Data memory values are used to change timers, counters and a unique option code feature used to unlock features imbedded within the program. These devices and features are described in detail on the next page. • Data Memory 0000 • This location contains the value for the image pick-up delay timer. This timer is used to insert a delay prior to the pad descending onto the plate in the rear position. This feature is valuable to prevent distortion induced by pad wiggle often found when using large or soft print pads. The value is displayed in 1/10’s of a second. Therefore a value of 00015 represents 1 ½ seconds. • Data Memory 0001 • This location contains the value for the image print delay timer. This timer is used to insert a delay prior to the pad descending onto the part in the front position. This feature is valuable to prevent distortion induced by pad wiggle often found when using large or soft print pads. It may also be helpful when using certain inks as a means for tacking the ink prior to transfer. The value is displayed in 1/10’s of a second. Therefore a value of 00015 represents 1 ½ seconds. • Data Memory 0002 • This location contains the value for the product load delay timer. This may be used to allow time between cycles when operating in the Auto Cycle mode. This value is also displayed in 1/10’s of a second. • Data Memory 0003 • This location contains the value for the number of indexes per cycle counter. This feature may be used in conjunction with a product-handling device, i.e. Rotary index table. As an example, it may be desirable to manufacture less than an entire set of fixtures if a job is prototype or smaller than a normal run. In this case you could put 2 or 4 fixtures on an 8-station indexer and set the value to either 4 or 2 respectfully. • Data Memory 0004 • This location contains the value for the number of prints per cycle counter. This may be used in either semi-automatic or automatic modes. This feature is valuable where more than 1 print is required for ink opacity i.e. a light colored ink on a dark substrate. • Data Memory 0005 • This location contains the value for the number of slave printers. • Data Memory 0006 –0009 • Reserved (Not used at this time) • Data Memory 0010

  6. Velocidad de ciclo Numero de colores con tintero cerrado Tamaños de placa para tintero cerrado Tamaños de impresión para tintero cerrado Requerimientos de aire comprimido Requerimiento eléctrico Controles Peso total Capacidad de presión 1,800 ciclos x hora 2 con tintero de 90mm y 1 con tintero de 130mm 100x215mm y 150x300mm 80 mmØ diámetro máx. y 110 mmØ diámetro máx. 4-6 CFM @ 60-80 PSI 115 Volts AC<2 amps Electro neumático 125 Kilos 275 Kilos de presión @ 80 Libras presión de aire Datos Técnicos

  7. Mantenimiento • Bajo costo de mantenimiento • Disponibilidad de refacciones locales • Diseño sencillo de maquinaria facilita mantenimiento • Refacciones de alta durabilidad

  8. Diseño mecánico

  9. Opción de tintero y anillos • Tintero con arillo de cerámica o acero

  10. Servicios Gratuitos al Adqurir Maquinaria • Capacitación • Puesta punto de maquina • Visitas a su planta • Pruebas de laboratorio (al inicio de proyectos) • Servicio técnico garantizado • Entrega de materiales en su planta • Atencion al cliente garantizada • Almacen de materiales ilimitado

  11. Accesorios Necesarios para impresión • 1 o 2 Tinteros de 90 ò 1 de 130 mm • Cliché de acero grueso o delgado • Placa de sujeción para cliché de acero delgado (si es requerido cliché delgado) • Tinta, aditivos y tampones • Sujetador de parte a imprimir

  12. Dimensiones de Maquina

  13. Dimensiones de Maquina

  14. Propuesta para Mabe

  15. Equipo opcional • Copa deslizable Horizontal

  16. Fin de Presentación

More Related