1 / 16

Hazardous Waste Disposal Training

Hazardous Waste Disposal. Hazardous Waste Disposal Training. Office of Engineering Safety Texas Engineering Experiment Station (TEES) & The Dwight Look College of Engineering. “A safe, healthful, and secure environment for scholarship and research.”. Hazardous Waste Disposal Training.

emera
Download Presentation

Hazardous Waste Disposal Training

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Hazardous Waste Disposal Hazardous Waste Disposal Training Office of Engineering Safety Texas Engineering Experiment Station (TEES)& The Dwight Look College of Engineering “A safe, healthful, and secure environment for scholarship and research.”

  2. Hazardous Waste Disposal Training Texas A&M University complies with hazardous waste disposal regulations by means of: • TAMU Hazardous Waste Management Program • http://ehsd-online/index.htm • TAMU Policy & Procedure Manual, §5.3.1 • http://rules.tamu.edu/ • Safety Manual, § 14 • http://engineering.tamu.edu/safety/smanual.shtml Office of Engineering Safety

  3. Definition : Hazardous Waste • A Hazardous Waste is: • Any waste material listed or identified in • Title 40, Code of Federal Regulations, Part 261, • Subpart C or D (40 CFR 261) • Or which exhibits the characteristics of ignitability, • corrosivity , reactivity, or E. P. toxicity • also defined in Part 261. Office of Engineering Safety

  4. Hazardous Waste:Containers,Tags and Collections Proper containment, tagging, collection and disposal are essential to the success of the Hazardous Waste Program. Individual Departments & Research Centers are responsible for properly identifying the hazardous wastes they generate, and for following university waste disposal procedures. Office of Engineering Safety

  5. Waste Containers • In good condition • No leaks • Compatible with contents • Secure closures — Ex: screw caps • Do not overfill • Do not exceed rated capacity • For reused containers • Destroy and/or obliterate the original product label • Use a NEW Label to identify the waste material • Do NOT use a waste disposal tag as a container label!!! Office of Engineering Safety

  6. Waste Container Labels EPA regulations require waste containers be labeled with at least: • The accumulation start date • The identity of the contents • The words “Hazardous Waste” Office of Engineering Safety

  7. Completing Waste Tags • When a container is ready for disposal, complete a TAMU Waste Tag and place it on the container • TAMU Waste Tags are available from • Environmental Health & Safety Department • Office of Engineering Safety • A completed waste disposal tag must be attached to EACH waste container BEFORE disposal • DO NOT DATE THE TAG, AT THIS TIME Office of Engineering Safety

  8. A Sample Chemical Waste Disposal Tag :

  9. Guidelines for Completing Waste Tags • 1.Completely fill out BOTH the upper and lower sections of the tag (This information is essential for record keeping.) • 2.The REQUESTOR is the person (faculty, PI) in charge of the lab. • Use full chemical names or common names; chemical formulas or abbreviations are not acceptable. • List all chemical components in the waste container, including water. • Long lists may be continued on the back of the tag. Office of Engineering Safety

  10. Guidelines for Completing Waste Tags • 3.Indicate the percent concentration of potentially explosive materials • Safety Manual, § 13 • Ex: picric acid, nitro compounds, other… • 4.Place additional hazard information in REMARKS. • Attach the tag to a string encircling the container. • Rubber bands, tape and wire are not acceptable. • 5.After completing the tag • Attach top part of the tag to the container • Mail bottom part of the tag to EHSD at MS 4472 • Do not separate tag for RICH, WERC, or ZACH … Office of Engineering Safety

  11. Guidelines for Completing Waste Tags • 6.Place tagged containers in your building’s “Satellite Waste Accumulation Area”. • If there is no designated SWAA, place the tagged waste container in your lab; identify the Building Name and Room No. on the tag. Office of Engineering Safety

  12. Special Provisions • TAMU facilities with large volumes of wastes receive a scheduled weekly pickup • Richardson, 115 RICH, Bldg #0387 • Wisenbaker, 134 WERC, Bldg #0682 • Zachary, 099 ZACH, Bldg #0518 • In these 3 Engineering facilities ONLY, leave the bottom portion of the tag attached • Do not tear off bottom portion of tag Office of Engineering Safety

  13. Collection and Disposal EHSD HazMat team (845-2132) will collect appropriately tagged waste containers. Containers with improper caps, leaks, outside contamination, or improper labeling will NOT be picked up until these problems have been corrected. The Faculty/PI shall ensure that chemical wastes are properly contained and labeled for disposal, in a responsible and timely manner. Office of Engineering Safety

  14. Prepared by: http://engineering.tamu.edu/safety/

  15. Hazardous Waste Disposal Hazardous Waste Disposal Training Office of Engineering Safety Texas Engineering Experiment Station (TEES)& The Dwight Look College of Engineering “A safe, healthful, and secure environment for scholarship and research.”

More Related