1 / 43

CAD Tool Tutorial

CAD Tool Tutorial. Spring 2006 CSE598A / EE597G Analog-Digital Mixed-Signal CMOS Chip Design. NCSU CDK Environment Setup. Make your own Cadence project directory > mkdir ~userid/AMIS05 Copy setup files copy ‘copy’ file from ‘~chip/cadence/local/cdssetup’ to your project directory

elton
Download Presentation

CAD Tool Tutorial

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. CAD Tool Tutorial Spring 2006 CSE598A / EE597G Analog-Digital Mixed-Signal CMOS Chip Design

  2. NCSU CDK Environment Setup • Make your own Cadence project directory > mkdir ~userid/AMIS05 • Copy setup files • copy ‘copy’ file from ‘~chip/cadence/local/cdssetup’ to your project directory > cp ~chip/cadence/local/cdssetup/copy . • run ‘copy’The setup files of NCXU CDK will be automatically copied to your project directory > copy

  3. Running NCSU CDK • Source ‘cadence_env’ and execute ‘icfb’ > source cadence_env > icfb & • This will bring up a ‘CIW’ (Command Interpreter Window) and a ‘Library Manager’ Library Manager CIW

  4. Creating a New Design • Create a new library in the Library Manager • File → New → Library…

  5. Creating a New Design • In a ‘Create Library’ window • give a library name and a path where you want to create your library directory ex) Name: CSE598A Path: ~userid/AMIS05 • choose ‘Attach to existing tech library’ for ‘Technology Library’and select‘AMI 0.60u C5N(3M, 2P, high-res)’ • click ‘OK’

  6. Creating a New Design • Now you have ‘CSE598A’ in a Library list • Create a ‘Cell View’ in your library • left click on your library ‘CSE598A’ in ‘Library Manager’ • File → New → Cell View… • in ‘Create New File’ windowput your ‘Cell Name’and select‘Composer - Schematic’for ‘Tool’ • click ‘OK’

  7. Creating a New Design • Differential amplifier design • this is the schematic of the differential amplifier we’ll design Vdd M0 M1 OUT IN0 IN1 M2 M3 Vb M4 .

  8. Schematic Design • Virtuoso Schematic Editor • design a schematic in this window • these are menu buttons on the left side Check and Save Property Save Instance Zoom in by 2 Wire (narrow) Zoom out by 2 Wire (wide) Stretch Wire Name Copy Pin Delete Cmd Options Undo Repeat

  9. Schematic Design • Placing parts in the schematic • click ‘Instance’ button or type ‘i’ • in the ‘Component Browser’, select ‘NCSU_Analog_Parts’ and browse for the parts you need • you can changethe properties of the parts in‘Add Instance’

  10. Schematic Design • Move • Edit → Move • Rotate / Sideways / Upside Down in ‘Move’ window • Wire • click ‘wire’ button or type ‘w’ • Changing property • select a part • click ‘property’ button or type ‘q’ • Zoom • click ‘Zoom’ button or select the area to zoom in with right mouse button

  11. Schematic Design • Adding in/out pins • add a wire • click ‘Pin’ button or type ‘p’ • give a pin name andselect input/output • place a pin on a wire

  12. Schematic Design • Check for any error • click ‘Check and Save’ button • make sure you don’tget warning or errormessage in CIW • Your design is nowready for a simulation

  13. HSpice Simulation • Creating a netlist (1/4) • run ‘Analog Environment’ from ‘Schematic Editor’: Tools → Analog Environment

  14. HSpice Simulation • Creating a netlist (2/4) • in the ‘Analog Environment’ window, setup a directory for simulation: Setup → Simulator/Directory/Host… • type in a directory name you want to create ex) ~userid/AMIS05/CSE598A/sim • click ‘OK’

  15. HSpice Simulation • Creating a netlist (3/4) • in the ‘Analog Environment’ window, create a netlist: Simulation → Netlist → Create Final • the netlist will appear in a new window

  16. HSpice Simulation • Creating a netlist (4/4) • save the netlist: File → Save as… • give a file name andclick ‘OK’

  17. HSpice Simulation • Creating a Spice file (1/4) • running simulation (Spectre or Hspice) in Cadence is not set up yet • we need to create Spice file (.sp) manually for now • open the netlist at your terminal > nedit amp.net & • remove everything belowthe circuit netlist • modify the circuit netlist - AMI06N to nch - AMI06P to pch circuit netlist

  18. HSpice Simulation • Creating a Spice file (2/4) • type in following Spice options .option post .option post_version=9007 .option ACCT=1 BRIEF=1 .option NUMDGT=8 MEASDGT=8 .option ACCURATE Spice options

  19. HSpice Simulation • Creating a Spice file (3/4) • type in input sources VVDD! VDD! 0 3.3 VIN0 IN0 0 SIN 1.65V 0.5V 10x VIN1 IN1 0 1.65V VVB VB 0 1.15V input source

  20. HSpice Simulation • Creating a Spice file (4/4) • type in the model library .LIB ‘/home/users2/kyusun/tool/model/libcmos050t22a.sp’ CMOS1 • type in an analysis type and .END .TRANS 0.01NS 500NS .END • save as amp.sp • refer to HSpice manuals for more information

  21. HSpice Simulation • Running HSpice • source ~chip/.cad and execute HSpice > source ~chip/.cad > hsp amp • ‘AvanWaves’ will pop up when the simulation is done

  22. HSpice Simulation • Simulation result • select an analysis type (Transient in this example) and double click the nodes to check the results • you’ll see display menus when right click on the display panel

  23. Circuit Layout • Loading Virtuoso XL (1/2) • you are ready for a layout if your schematic meets a design specification • load ‘Virtuoso XL’ from the schematic editor Tools → Design Synthesis → Layout XL • select ‘Create New’and click ‘OK’

  24. Circuit Layout • Loading Virtuoso XL (2/2) • select options in ‘Create New File’ - Library Name : CSE598A - Cell Name : amp - View Name : layout - Tool : Virtuoso • click ‘OK’

  25. Circuit Layout • Virtuoso XL Layout Editor • layout your design in this window • these are menu buttons on the left side Save Undo Fit Edit Property Zoom in Instance Zoom out Path Stretch Polygon Copy Label Move Rectangle Delete Ruler

  26. Circuit Layout • Generating transistors (1/2) • generate transistors and in/out pins from your schematic : Design → Gen From Source…

  27. Circuit Layout • Generating transistors (2/2) • Layout Generation: I/O Pins, Instances • I/O Pins: select metal1/dg, set the size to 0.9x0.9, and click ‘Apply’ • click ‘OK’

  28. Circuit Layout • Layout Editor (1/12) • tool generatedI/O pins andtransistors • we need to doplacing androuting • to see thetransistors,type ‘Shift+f’and to hide,type ‘Ctrl+f’ I/O pins transistors

  29. Circuit Layout • Layout Editor (2/12) • click on a transistor in the layout editor • the corresponding transistor in the schematic editor will be highlighted

  30. Circuit Layout • Layout Editor (3/12) • pins and instance names appear in the CIW when you click them in the layout editor

  31. Circuit Layout • Layout Editor (4/12) • when you move an instance or an I/O pin, yellow lines will appear • these lines show where the ports or nodes need to be routed

  32. Circuit Layout • Layout Editor (5/12) • LSW (Layer Selection Window) • user can select different layers ofthe mask layout • select a layer you want to editby clicking on the layer in LSWfor editing

  33. Circuit Layout • Layout Editor (6/12) • there is a glitch in current layout editor setup • transistors are placed off-grid after generating layers in some case (this causes DRC errors) • to fix, go to ‘Display Options’- Options → Display… or type ‘e’ • change ‘Grid Controls’ - Type : Lines - Minor Spacing : 0.15 - Snap Spacing : 0 • click ‘OK’

  34. Circuit Layout • Layout Editor (7/12) • move transistors and I/O pins to be placed on-grid • open ‘Display Options’ and go back to previous ‘Grid Controls’ (dots 1 5 0.15 0.15) on-grid off-grid

  35. Circuit Layout • Layout Editor (8/12) • now place transistors as you want to layout • Rotate / Sideways / Upside Down are available in ‘Move’ window

  36. Circuit Layout • Layout Editor (9/12) • perform DRC check often during layout design to prevent design rule violation • in layout editor : Verify → DRC… • click ‘OK’ • white markers indicateDRC errors

  37. Circuit Layout • Layout Editor (10/12) • using ‘Ruler’ is helpful for resolving DRC errors, aligning cells, etc. • to create ruler: Window → Create Ruler or type ‘k’ • left click at a starting point and another left click at a final point • to clear all rulers : Window → Clear All Ruler or type ‘Shift+k’

  38. Circuit Layout • Layout Editor (11/12) • routing - select a layer in LSW - click ‘Rectangle’ or type ‘r’ - draw a wire • contact - type ‘o’ - select contact type - number of contacts in row/column rectangle contact

  39. Circuit Layout • Layout Editor (12/12) • run a final DRC checkwhen done with layoutand save your design

  40. Netlist and Simulation • Netlist extraction (1/3) • run ‘Extractor’ - Verify → Extract…- click ‘Set Switches’- select ‘Extract_Parasitic_Caps’- click ‘OK’- check for any error message

  41. Netlist and Simulation • Netlist extraction (2/3) • you may close layout editor and schematic editor windows now • double click ‘extracted’ view in your ‘Library Manager’ • a layout editor with the extracted view will pop up

  42. Netlist and Simulation • Netlist extraction (3/3) • run ‘Analog Environment’ from ‘extracted view’: Tools → Analog Environment • following steps are same as simulating schematic design : refer to ‘Creating a netlist’, ‘Creating a Spice file’, and ‘Running HSpice’ [slides 13~21]

  43. Product Documentation • Help • ‘HELP’ button in each window brings up product documentation • this is very useful for learning basic features ex) • or email jalim@cse.psu.edu documentation for ‘Stretch’ in layout editor

More Related