1 / 15

Zelimir Djurcic Physics Department Columbia University

Backgrounds in neutrino appearance signal at MiniBooNE. Zelimir Djurcic Physics Department Columbia University. Before the MiniBooNE: The LSND Experiment. LSND took data from 1993-98 - 49,000 Coulombs of protons - L = 30m and 20 < E n < 53 MeV.

elsiebryant
Download Presentation

Zelimir Djurcic Physics Department Columbia University

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Backgrounds in neutrino appearance signal at MiniBooNE Zelimir Djurcic Physics Department Columbia University Zelimir Djurcic-PANIC05-Santa Fe

  2. Before the MiniBooNE: The LSND Experiment LSND took data from 1993-98 - 49,000 Coulombs of protons - L = 30m and 20 < En< 53 MeV Saw an excess ofe:87.9 ± 22.4 ± 6.0 events. With an oscillation probability of (0.264 ± 0.067 ± 0.045)%. 3.8 s significance for excess. Oscillations? Signal: p e+ n n p  d (2.2MeV) Need definitive study of e at high m2 … MiniBooNE

  3. Search for e appearance in  beam Use protons from the 8 GeV booster Neutrino Beam <E>~ 1 GeV FNAL 8 GeV Beamline 50 m decay pipe 12m sphere filled withmineral oil and 1520 PMTslocated 500m from source decay region:   ,  K   “little muon counters:” measure K flux in-situ magnetic horn: meson focusing MiniBooNE detector  →e? movable absorber: stops muons, undecayed mesons magnetic focusing horn Zelimir Djurcic-PANIC05-Santa Fe e ???

  4. Neutrino Interactions in the Detector We are looking for e : nen  e-p Janet Conrad’s talk Current Collected data: 685k neutrino candidates (before analysis cuts) for 6.5 x 1020 protons on target (p.o.t.) • 48% QE • 31% CC +/- • 1% NC elastic • 8% NC 0 • 5% CC 0 • 4% NC +/- • 4% multi- If LSND is correct, we expect several hundred e (after analysis cuts) from for e oscillations. Zelimir Djurcic-PANIC05-Santa Fe

  5. Energy Calibration  e We have calibration sources spanning wide range of energies and all event types ! Michel electrons prod from  decay: provide E calibration at low energy (52.8 MeV), good monitor of light transmission, electron PID 12% E res at 52.8 MeV 0 mass peak: energy scale & resolution at medium energy (135 MeV), reconstruction cosmic ray  + tracker + cubes: energy scale & resolution at high energy (100-800 MeV), cross-checks track reconstruction provides  tracks of known length → E

  6. Particle Identification Čerenkovrings provide primary means of identifying products of  interactions in the detector beam m candidate nmn m- p Michel e- candidate nen  e-p beam p0 candidate nmp nm pp0 n n p0→ gg ring profile → can distinguish particles which shower from those which don’t

  7. Background to e appearance signal Comes from: -Misidentification of ’s in charged current  events as electrons. -Intrinsic e’s in beam. -Misidentification of 0’s in neutral current  events as electrons. -Radiative decays of . • Separation of  from e events • Exiting  events fire the veto • Stopping  events have a Michel electron after a few sec • Also, scintillation light with longer time constant  enhanced for pions and protons (high dE/dx) • Čerenkov rings from outgoing particles • Shows up as a ring of hits in the phototubes mounted inside the MiniBooNE sphere • Pattern of phototube hits tells the particle type Zelimir Djurcic-PANIC05-Santa Fe

  8. Intrinsic e in the beam p+ m+ nm e+ nenm K+p0 e+ne KLp-e+ne Monte Carlo Small intrinsicne rate  Event Ratione/nm=6x10-3 • nefromm-decay • Directly tied to the observednminteractions • Kaon rates measured in low energy proton production experiments • HARP experiment (CERN) • E910 (Brookhaven) • MiniBooNE Data • “Little Muon Counter” measures • rate of kaons in-situ See Robert Nelson’s talk for details !

  9. Production of the 0 ’s e appearance: 0 production important because background to →e if ’s highly asymmetric in energy or small opening angle (overlapping rings) can appear much like primary electron emerging from a e QE interaction! signal 0 background Resonant 0 production  N  N=(p,n) 0 N’ Coherent 0 production  A  A 0 p0→g g In addition to its primary decay N, the  resonance has a branching fraction of 0.56% to N final state. Zelimir Djurcic-PANIC05-Santa Fe

  10. Reconstruction and PID Various algorithms (MLL, ANN, BDT) used to optimize PID, to achieve good: • Robustness • Efficiency of PID separation Boosted decision trees: • Go through all PID variables and find best • variable and value to split events. • For each of the two subsets repeat the process • Proceeding in this way a tree is built. • Ending nodes are called leaves. • After the tree is built, additional trees are • built with the leaves re-weighted. • The process is repeated until best S/B • separation is achieved. Reference NIM A 543 (2005) 577. Zelimir Djurcic-PANIC05-Santa Fe

  11. Boosting PID Algorithm Neural Network Efficiency of PID separation example: muon / electron identification, measured with cosmic ray muons and associated decay electrons, for two PID algorithms under study PRELIMINARY Boosting Decision Tree PRELIMINARY Muons Electrons Zelimir Djurcic-PANIC05-Santa Fe

  12. Important Cross-check… … comes from NuMI events detected in MiniBooNE detector! Remember that MiniBooNE conducts a blind data analysis! We do not look in MiniBooNE data region where the osc. e are expected… We get e,  , 0 , +/- , ,etc. events from NuMI inMiniBooNE detector, all mixed together Use them to check our e reconstruction and PID separation! MiniBooNE NuMI events serve as gold mine to verify our analysis! Decay Pipe Beam Absorber See Alexis Aguilar-Arevalo’s talk for details !

  13. Look for appearance of e events above background expectation Use data measurements both internal and external to constrain background rates Appearance Signal SignalMis IDIntrinsic e • Fit to E distribution used to separate background from signal. Event Class Cross-check K+ HARP,LMC,External Data K0 E910,MiniBooNE Data External Data  MiniBooNE Data 0 NuMI,MiniBooNE Data Other(,etc) NuMI,MiniBooNE Data Zelimir Djurcic-PANIC05-Santa Fe

  14. Dm2 = 1 eV2 Dm2 = 0.4 eV2 MiniBooNE Oscillation Sensitivity • Oscillation sensitivity and measurement capability • Data sample corresponding to 1x1021 pot • Systematic errors on the backgrounds average ~5% Zelimir Djurcic-PANIC05-Santa Fe

  15. Conclusion and Prospects Background to e oscillation signal is well understood. Most backgrounds can be constrained with MiniBooNE data.  Background will be constrained to allow the signal to be extracted, if present. • At the current time have collected 6.5x1020 p.o.t. • Plan is to “open the box” when analysis is ready  Current estimate is not before end of 2005 • This leads to the question of the next step • If MiniBooNE sees no indications of oscillations withnm  Need to run withnm since LSND signal wasnmne • If MiniBooNE sees an oscillation signal  Then …………(stay tuned).

More Related