Surfacer
Download
1 / 24

Surfacer - PowerPoint PPT Presentation


  • 37 Views
  • Uploaded on

Surfacer. General Safety. Wear your safety glasses at all times Take off all jewelry Do not wear loose clothing Make sure you are the only person in the safety zone when operating the surfacer. General Safety continued. Never set material on the tables of the surfacer

loader
I am the owner, or an agent authorized to act on behalf of the owner, of the copyrighted work described.
capcha
Download Presentation

PowerPoint Slideshow about ' Surfacer' - elmo-rodriguez


An Image/Link below is provided (as is) to download presentation

Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author.While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server.


- - - - - - - - - - - - - - - - - - - - - - - - - - E N D - - - - - - - - - - - - - - - - - - - - - - - - - -
Presentation Transcript

General safety
General Safety

  • Wear your safety glasses at all times

  • Take off all jewelry

  • Do not wear loose clothing

  • Make sure you are the only person in the safety zone when operating the surfacer.


General safety continued
General Safety continued

  • Never set material on the tables of the surfacer

  • Never force your material into the surfacer

  • Never look into the surfacer while it is in operation

  • If the material gets “jammed”in the surfacer, do not lower the wheel so it will finish the rest of the cut, simply shut the machine off……. BRB


Components of the surfacer
Components of the Surfacer

  • Depth Wheel

  • Depth Scale

  • Chip Guard

  • In-feed Table

  • Out-feed Table


Components of the surfacer1
Components of the Surfacer

  • In-feed Rollers

  • Out-feed Rollers










Surface plane
Surface Plane

  • Surface Plane is defined as cutting a thin layer of material off the top face of the material to create uniform thickness


Operation procedure 1
Operation Procedure 1

  • 1. Set the material on the depth scale to have the top of the material read “0” (zero)


Operation procedure 2
Operation Procedure 2

  • 2. Check for loose knots, foreign material, and other defects in the material.

  • Make sure the material is longer than 11”

    • If not, a back-up board is required.

  • Place the flat or cupped side down on the in-feed table. The surfacer will cut the top of the material.


Operation procedure 3
Operation Procedure 3

  • 3. Turn on the machine

  • Stand to the left or right of the table, not in line with the material.

  • Send the material through. If more than one piece needs surfacing at the same setting, more than one CAN be sent through at the same time.


Operation procedure 4
Operation Procedure 4

  • 4. Remove the material from the out-feed table.

  • Return to the in-feed table.

  • Turn the depth wheel 1/2 turn clockwise. This is the MAXIMUM safe cut.

  • Feed material into the surfacer again


Operation procedure 5
Operation Procedure 5

  • 5. Repeat step 4 until you have reached your specified thickness.




On off
On/Off

Cutter On

Rollers On

All Off




ad