Capston design 2
This presentation is the property of its rightful owner.
Sponsored Links
1 / 18

Capston Design 2 PowerPoint PPT Presentation


  • 59 Views
  • Uploaded on
  • Presentation posted in: General

Capston Design 2. 20072370 Jo. jin-hun 20072403 Hwang. Man- seong. Contents. 1. Cause Carpal Tunnel Syndrome 2 . Inspection procedures 3 . Finding a doctor 4 . Manufacturing process of the prototype 5 . Results and Discussion of Capstone design execution

Download Presentation

Capston Design 2

An Image/Link below is provided (as is) to download presentation

Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author.While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server.


- - - - - - - - - - - - - - - - - - - - - - - - - - E N D - - - - - - - - - - - - - - - - - - - - - - - - - -

Presentation Transcript


Capston design 2

Capston Design 2

20072370 Jo. jin-hun

20072403 Hwang. Man-seong


Contents

Contents

  • 1. Cause Carpal Tunnel Syndrome

  • 2. Inspection procedures

  • 3. Finding a doctor

  • 4. Manufacturing process of the prototype

  • 5. Results and Discussion of Capstone design execution

  • 6. Problems and improvements in the future


Brainstorming and subjects selection team member

Brainstorming and subjects selectionTeam member

  • Cho jinhun

  • Hwang Man-sung


Subjects selected

Subjects Selected

  • Product design based on ergonomics for

  • the prevention of carpal tunnel syndrome


1 cause of carpal tunnel syndrome

1. Cause of carpal tunnel syndrome

  • Patients with carpal tunnel syndrome

  • Healthy people


1 cause of carpal tunnel syndrome1

1. Cause of carpal tunnel syndrome

  • If you use a long

  • time hand in an

  • inappropriate position,

  • to give the stress on

  • the wrist joint

  • carpal tunnel syndrome

Symptoms of carpal tunnel syndrome


2 inspection procedures

2. Inspection procedures

  • Test method determines a photograph that is deformed to the wrist portion with the X-ray measuring method is basic in Orthopaedic.

  • I suspect the symptoms of carpal tunnel syndrome wrist is coming up a little inflated.

  • It was concluded that it is selected subjects found symptoms of carpal tunnel syndrome, the test subjects of these, make the products.


3 finding a doctor

3. Finding a doctor

  • ① Carpal tunnel syndrome occurs when it has remained while the abnormal conditions which are also referred to as carpal tunnel syndrome, it is part of the wrist is not the function of the musculoskeletal original.

  • ② Carpal tunnel syndrome is caused carpal tunnel, that is the wall of the blood vessels in the wrist region is not beautiful, blood does not turn, carpal tunnel becomes increasingly thick

  • ③ And thus the surrounding muscle does not work gradually median nerve is pressed due to swelling of the ligaments of the wrist, you would not go, but you will be passing the power on the wrist this. I made ​​that a situation like this is to be sustained, carpal tunnel syndrome may occur.


Idea sketch

- Idea sketch

Plaster bandage

  • 360° turn

Seating surface (La Tax Materials)

  • Circular roller


Prototype design and product design

- Prototype design and product design

  • 360 ° turn

Seating surface (La Tax Materials)

With both hands wear, mobility grants and convenience


4 manufacturing process of the prototype

4. Manufacturing process of the prototype

  • 1. Prepare a pad to put under it plaster bandage, cut into such a manner as to fit on the wrist of the subject.

Plaster bandage

Hardboard paper


4 manufacturing process of the prototype1

4. Manufacturing process of the prototype

2. Thereby mounted a round plaster mold rollers circular and made ​​a fitting frame on the wrist of the subject with a plaster, is mounted on the bottom.


4 manufacturing process of the prototype2

4. Manufacturing process of the prototype

360° rotatable roller

3. Roller area of the lower part of the plaster mold of the wrist is complete, It with both, to override the soft pad on it.


4 manufacturing process of the prototype3

4. Manufacturing process of the prototype

4. I try to apply to the user the prototype was completed.


5 results and discussion of capstone design execution

5.Results and Discussion of Capstone design execution

  • Execution result

  • 1.Deformation using the easy gypsum, I produce a frame that matches the wrist of a user.

  • 2. The use of a roller 360° rotatable circular to reduce the force on the wrist

  • 3. To minimize the hostility to the skin, and covered with a soft latex material.


6 problems and improvements in the future

6. Problems and improvements in the future

  • On to manufacture the product, it was trial and error many times.

  • 1. Effect is not very good if you try to create a low cost in terms of price

  • 2. If you try to create and to maximize the effect, practical application it is difficult to price of the product is too expensive

  • 3. If we consider only functional effect, various problems in many cases.

  • Use of gypsum were simultaneously considering aspects of price and effective, it also was not a satisfactory result.

  • It is necessary to study the materials and manufacturing methods to be improved as viewed thinking little material portable used in the human body.


Capston design 2

Thank YOU!

See u next Time!


  • Login