1 / 13

2006 SAE Clean Snowmobile Challenge

2006 SAE Clean Snowmobile Challenge. Team Members: Steve Battaglia, Brian Belmont, Dan Bughbee, Kevin Gastle Mike Ide, Kelly McRory, Eric Peckham, Dan Sweeney, Greg Tilley. 2006 Competition Goals.

elizabethl
Download Presentation

2006 SAE Clean Snowmobile Challenge

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 2006 SAE Clean Snowmobile Challenge Team Members: Steve Battaglia, Brian Belmont, Dan Bughbee, Kevin Gastle Mike Ide, Kelly McRory, Eric Peckham, Dan Sweeney, Greg Tilley

  2. 2006 Competition Goals • Create a clean and reliable naturally aspirated four stroke snowmobile. • Mate an M-10 suspension to an Edge chassis to create the best ride and drive. • Lower emissions and quite exhaust noise.

  3. Team History • Two first place finishes (2000, 2005) • Lowest Emissions (2004) • Quietest snowmobile (2005) • Best Fuel Efficiency (2005) • Best Overall Performance (2005)

  4. Purpose of Competition • Create a more environmentally friendly snowmobile • Reduce noise pollution • Lower emissions • Increase fuel economy

  5. Design • Engine Mount • Fuel Injection • Exhaust System • Sound Reduction • Instrumentation • Suspension • Aesthetics

  6. Engine Mount Design • Cradle Design. • Utilizes chassis mounting • points. • Utilizes Engine mounting • points. • Create least amount of • Vibration.

  7. Fuel Injection • We used a closed loop Bosch Motronic System. • TPS and RPM controlled system • Programmed for lean combustion.

  8. Questions

  9. Exhaust System • Stock manifold cut down and adapted for shorter system • Flex coupler to allow for chassis movement • Lubrizol 3-Way catalytic converter • Honda Silverwing muffler (same as last year) • Exhaust exits in stock location on right sided in front of chain case

  10. Sound Reduction • Used sound reducing material from American Acoustical • PDP • VE • Hushcloth Melamine • Millenium Metal

  11. Instrumentation • EGT Avenger III Data Acquisition Unit • Tachometer, Exhaust Temperature on both cylinders and after catalytic converter, Coolant Temperature, Oil Temperature

  12. Suspension • M-10 rear suspension • Over 13 in. of travel • Has done very well in the public market for touring sleds. • Lightweight • Stock Edge Front suspension • 10 in of travel • Stiffer Springs for heavier four stroke

  13. Aesthetics • Keep the sled appealing to the general public • Kept the stock look of the hood since the edge body is widely accepted by the public. • The entire sled is set up like a stock Edge Classic with the M-10

More Related