Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author.While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server.
The Twisted Pair Transmission SystemforCCTVSolution
Presented byOTIMA CORPORATION
1. Introduction P022. Video Transmission Range P033. General Applications P044. UTP Cabling Transmission Product Line P05Basic DIY Application p06 Video and Audio Transmission Application p07 Camera with Pan-Tilt Scanner Device Application p08 Speed Dome Camera Application p09 / p10 4 Cameras to Hub CCTV Distribution Application p11 4 Cameras Power from Cable Hub station p12 4 Channel Hub to Hub CCTV Distribution Application p13 4 Cameras Video & Power Over One CAT 5 Cable p14 One Cable For Variety Range Application p15 Video, Power, Data Transmission Application p16
Multi-Port 8 or 16 CH Multiplexer / DVR Application p17 Building or Large CCTV installation with Rack cabinet p18 Smart PTZ Transmission and controller p195. Coaxial Cabling Transmission Solutions P20 Video Distributor Application p21 Video Amplifier Application p22 Video Distribution Amplifier Application p236. Surge Protection Device P24Surge Protection Application p257. CCTV Solution Provider for Different Video Interference P268. AC to DC, DC to DC Power Converter P279. Power Supply Center P2819” Rack Mounting 1U Panel & Wall Mounting Power Supply Center p28 / 2910. Accessories – Wire & Tool P30
Passive: No power requiredActive: DC 12 volt or AC 24 volt power requiredPassive Transmitter ► Passive Receiver: Range: Color – 400m B/W – 600m
Passive Transmitter ► Active Receiver:Range: 1000m
Active Transmitter ► Active Receiver: Range: Color – 1500m B/W – 2400m
* Using 2 sets series connection, B/W video transmission up to 3.6 Km, Color up to 3.0 Km* Short range may result when video transceiver are used with DVR
Perfect for or larger CCTV installations where need install many cameras, difficult in using coaxial cable, existing many interference environment.
To Provide: Clear Video Signal, Fewer Cable to Manage, Lower Cost Per Connection, Centralized Wiring For Greater Control. Such As:► Modern structured cabling systems in new construction
►Installations with a high camera count
►High Interference areas
►Where there is existing structured cabling
►School Campuses, Casinos, Hospitals, Apartment complexes
►Warehouses, Entry Gates, Elevator
Following are the items with UTP transmission system for new generation CCTV solutions:► Twisted Pair Transmission (Video, Audio, Data, Power)
► Video Distributor, Video Amplifier
► Smart PTZ Transmission & Controller
► Surge Protection Device
► Solution Provider for different Video Interference
► Power Supply Center, Tooling, Accessories
The basic CCTV installation with UTP cabling transmission system
The video and audio transmission to monitoring station with range 600m (B/W), 400m (Color)
Using video transceiver with Retractile coiled cable on the camera to avoid cable
bad connectionor break when the pan-tilt device under operation.
Using TTA111AV could transmit video, audio, 2 data signal, range up to 1.5 Km (Color), 2.4 Km (B/W)
Using one 4 pair UTP cable to transmit / receive 4 sets video signals or using 3 pairs to transmit / receive 3 sets video signal, plus one data signal (RS-422, RS-485)
Four Cameras on different site and monitoring station are far away. Each camera connect to cable hub, then using one single CAT 5 cable to transmit 4 sets video signals to 4-channel video transceiver hub to monitoring station. (Quad/Multiplexer/DVR solution)
Camera power send from cable hub station (60 meters), then using one CAT 5 networking cable to transmit 4 sets video signal to monitoring station.
The range is near between four cameras: Using existing coaxial cable from camera to 4 channel TX Hub, over one cable to RX hub monitoring station. Ideal for cost saving of cable and easy installation.
Use 4 pcs TTP111VP at camera side, work with TTP444VP could transmit 4 cameras video & power over one CAT 5 cable only. (Transmission range depending on power current, voltage)
Passive or active video transceiver for series connection to use one CAT 5 4 pairs cable, transmit 4 video signals for different range.
Using CAT 5 cable to transmit Video, Power, Data signal for best & professional cabling management.
Using 8 or 16 receiver 1U panel on monitoring station, Professional 1U panel could reside in the same rack as other equipment, such as switcher, multiplexer, DVR... etc.
Using rack card type, could insert passive or active receiver card at TRN012 Rack Cabinet, the maximum receiving channel could up to 60 channels (passive).
OTIMA Smart PTZ Transmitter PCT017 can control PTZ Receiver (PCR011/017) up to 100 sets data single, only by using 2 wires (twisted pair) parallel connection.
Video Distributor: if your installation calls for sending a video signal over Multiple monitors, use one of our video distributors.
Video Amplifier: if your installation demands very long camera cable runs, use one of our video camera amplifiers to enhance video signal quality.
Video Distribution Amplifier: this kind of device combines above 2 functions.
Video Distribution Amplifier
Using CD104 transmit One video signal to Four monitors (destination devices) without Video Loss
* Video Distributor *
CD102: 1 input to 2 output , CD104: 1 input to 4 output,
CD108: 1 input to 8 output , CD116: 1 input to 16 output
CD408: 4 input to 8 output, CD816: 8 input to 16 output
CD1664: 16 input to 64 output in 2U rack mounting panel
Using CA404 for 4 channel Video amplifications, range could up to 1000 meters with using RG59 coaxial cable
* Video Amplifier *with Sharpness, Brightness Controls
CA101 : 1 input to 1 output CA101A : 1 input to 1 output with Audio CA404 : 4 input to 4 output CD101VH : 1 input to 1 output HF / MF / LF compensation
Using CD102A for 1 IN 2 OUT Distribution Amplifications,
Range could up to 1000 meters with using RG59 coaxial cable on each channel.
* Video Distribution Amplifier *with Sharpness, Brightness Controls
CD102A : 1 input to 2 output CD408A : 4 input to 8 output with Audio CD816A : 8 input to 16 output in 1U panel
End up throwing away the camera system you Installed just because your equipments were hit with lightning. Using OTIMA Surge Protectors to protect your equipment from high voltage surges from nearby lightning strikes.
1U rack mounting panel – Excellent for DVR Protection
Video & Data
Using low cost OTIMA Surge Protection Products to protect your high value CCTV equipments.
Video Ground Loop Isolator: it could reduce “Ground Loop Interference” with CCTV signals and can easily install in a new or added to existing systems. It is useful where a video signal is transmitted via cable between points with different ground potentials, differences in ground potentials a typically caused by unbalanced power line loads.
Video Ground Loop Isolator
Video Transformer Filter: The reason to cause “rolling” image is from the power interference during transmission or the video transmission range is too big between 2 or multi channels to have the signal not balanced. Using the Video Transformer Filter to extra interference rejection.
Video Transformer Filter
High Frequency Interference Blocker: Block the interference from electromagnetic wave, high voltage electricity, wireless station, with Video Transformer Filter function
High Frequency Interference Blocker
For DC type camera or video power sources convert using AC24V for professional CCTV industry installationsAC14V – AC24V to DC12VDC15V – DC30V to DC12V
PC300 / PC500
* AC to DC, DC TO DC Power Converter*
PC300 : 300mA Max. (Regulated) PC500 : 500mA Max. (Regulated) PC1A : 1000mA Max. (Regulated)AC to DC, DC to DC regulatedAC24V convert to DC12V regulatedAC14V – AC24V convert to DC12V regulatedDC15V – DC30V convert to DC12V regulated
9. Power Supply Center – 19” Rack Mounting 1U Panel
OTIMA PR801, PR816 both are 8 AMPAC24V or DC12V power supply in 19” standard 1U rack mounting cabinet. It is perfect to install in the control room. Application for larger industry CCTV installation where need numbers of camera, housing, pan tilt turning device or other Surveillance equipments power sources from building control room.
Power Supply Center – Wall Mounting
OTIMA PW408, PW816 are 4 AMP, 8 AMP DC12V/ DC24V, or AC24V power supply At Wall Mounting Type. It is perfect to install in the control room. Application for larger industry CCTV installation where need numbers of camera, housing, pan tilt turning device or other Surveillance equipments power sources
from building control room.
OTIMA also offer a series of Wire & Tool products to use on Coaxial, Twisted Pair Installation.
Coaxial & Twisted Pair Cable
Accessories Parts & Connectors