1 / 12

Engine Dissection - Nuts and Bolts

Engine Dissection - Nuts and Bolts . Threaded Fastener Issues on Engine: Types Materials/Grades Tightening Torque. Threaded Fasteners. Did you know that? the Boeing 747 uses about 2.5 million fasteners 70,000 titanium costing $150,000 400,000 other fasteners costing about $250,000

elijah
Download Presentation

Engine Dissection - Nuts and Bolts

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Engine Dissection - Nuts and Bolts Threaded Fastener Issues on Engine: • Types • Materials/Grades • Tightening Torque

  2. Threaded Fasteners Did you know that? • the Boeing 747 uses about 2.5 million fasteners • 70,000 titanium costing $150,000 • 400,000 other fasteners costing about $250,000 • 30,000 squeeze rivets, 50cents each installed • In certain applications (such as an engine head), you should tighten the bolt as much as possible, if it does not fail by twisting during tightening, there is a very good possibility that the bolt will never fail

  3. Why are fasteners used? Advantages • Removable • Easy to install • Wide variety of standard parts Disadvantages • loosening • failure • cost

  4. Types • Machine screws • Wood screws • Tapping screws

  5. Standard Thread Systems Unified or American ACME SI (ISO) Pipe Whitworth (UK)

  6. Typical Designation 1/2” - 13 UNC - 2A Terminology of screw threads Sharp vee threads shown for clarity; the crests and roots are actually flattened or rounded during the forming operation. external thread (B means internal) Class of fit (1 is loosest tolerance, 3 is tightest) Thread Series UNC (Unified Coarse) UNF (Unified Fine) Pitch (threads/inch) Nominal Diameter (also shown as decimal or screw #)

  7. Bolt Grades • Grade indicates the tensile strength of the bolt • Determined by bolt material and heat treating

  8. Materials Let’s look at the example of engine head bolts • The head is alumimum, so why are the head bolts made of steel ? • In what cases might you want to use an aluminum bolt?

  9. Tightening Torque It is typical on engines for bolts to have a specified tightening torque. Why? • It results in a quantified preload on the bolts • Insures that parts never separate • Maintains friction (no sliding to shear forces) • Insures even distribution of loading • prevent warpage of mating parts • uniform pressure distribution over seal or gasket • Prevents bolt from loosening • Reduces fatique effects

  10. Bolt Manufacturing Processes • Forging (upsetting) • Rolling a) b) Thread-rolling processes: a) reciprocating flat dies; and b) two-roller dies. Threaded fasteners, such as bolts, are made economically by these processes at high rates of production

  11. Manufacturing Processes - continued • Turning on screw machines (a) Differences in the diameters of machined and rolled threads. (b) Grain flow in machined and rolled threads. Unlike machining, which cuts through the grains of the metal, rolled threads have improved strength because of cold working and favorable grain flow.

  12. References • Kalpakjian, S. Manufacturing Engineering and Technology, 2nd Edition, Addison Wesley, 1992. • Spotts, M.F., Design of Machine Elements. Prentice-Hall, Inc., 1985. • Shigley, Joseph and Mitchell, Larry, Mechanical Engineering Design. McGraw-HillBook Company, 1983.

More Related