1 / 6

A Working Model Of A Step Down Transformer By: Paras Kapoor EE12B1022

A Working Model Of A Step Down Transformer rmer. A Working Model Of A Step Down Transformer By: Paras Kapoor EE12B1022. Working of An AC/DC Transformer. Requirement of components to make a transformer: 1.Double layer copper magnetic wire. 2.Plates or sheets of silicon-iron.

efrat
Download Presentation

A Working Model Of A Step Down Transformer By: Paras Kapoor EE12B1022

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. A Working Model Of A Step Down Transformerrmer A Working Model Of A Step Down TransformerBy:Paras KapoorEE12B1022

  2. Working of An AC/DC Transformer Requirement of components to make a transformer: 1.Double layer copper magnetic wire. 2.Plates or sheets of silicon-iron. 3.Waxed paper or press board. 4.Brackets and screws. 5.Spool or formwork(plastic). 6. IN5408 diode with 3 amp forward current rating.

  3. Calculations Required To Make A Transformer Calculating the core area of the transformer.C.A. = side * side of the spool. Calculating turns per voltage:TPV = 1000/(4.44*C.A.*flux density*AC frequency).Standard value of flux density of steel may be taken as 1weber/sq.m . Primary current = (secondary volt*current)/(primary volt*efficiency). Number of turns = TPV*(primary voltage). Secondary coil number of turns = TPV*1.04*(secondary voltage). Also(primary turns)*(secondary voltage)=(secondary turns)*(primary voltage).

  4. Calculations made by me. Primary voltage = 228. C.A.= 5.1*4= 20.4 cm^2. T.P.V. = 1000/(4.44*50*1*20.4) = 2.2 Primary number of turns =1200 turns. Secondary number of turns = 230. Secondary voltage = 44 V.(by calculation).

  5. Converting AC to DC Using diode The IN5408 diode is an ordinary silicon diode. It has a 3 amp forward current rating, and a 1000 volt peak reverse voltage rating. Using Four diode in combination. Machine to make core windings.

  6. Simple Procedure to Make It…

More Related