NEW JERSEY DAM SAFETY

1. NEW JERSEY DAM SAFETY RULES AND REGULATIONS

2. What is a dam? "Dam" means any artificial dike, levee or other barrier, together with appurtenant works, which is constructed for the purpose of impounding water on a permanent or temporary basis, that raises the water level five feet or more above the usual, mean, low water height when measured from the downstream toe-of-dam to the emergency spillway crest or, in the absence of an emergency spillway, the top of dam.

3. What is the toe of dam? "Toe-of-dam" means the junction of the downstream face of a dam with the ground surface……... Junction with ground surface

4. What is the toe of dam? ….or the invert of the outlet pipe whichever is the lowest point. Invert of Outlet Pipe

5. In Cross Section The junction of the downstream face of a dam with the ground surface……. Lowest Point

6. In Cross Section or the invert of the outlet pipe. Lowest Point

7. Raises water level 5 feet or more …..when measured from the downstream toe-of-dam to the emergency spillway crest….. > 5 feet

8. Raises water level 5 feet or more ….or, in the absence of an emergency spillway, the top of dam. > 5 feet

9. In Cross Section …..when measured from the downstream toe-of-dam to the emergency spillway crest….. emergency spillway > 5 feet

10. In Cross Section ….. or, in the absence of an emergency spillway, the top of dam. Top of Dam > 5 feet

11. Pinelands Dam Safety Standards only apply when: Dam is greater than 8 feet high, or Drainage area is greater than one square mile, or where the water surface of the impoundment created by the dam is greater than 100 acres

12. Permit by Rule Owners and operators of Class IV dams are not required to file documents with nor obtain a permit from theDepartment, but must meet the following requirements:

13. Permit by Rule Design must be based upon a spillway design storm that results in rainfall of 50 percent greater than a 24 hour, 100 year, Type III storm. All necessary local approvals must be obtained; and…….

14. Permit by Rule • A New Jersey licensed professional engineer must design the Class IV Dam to meet all technical requirements of the Dam Safety Standards.

15. What is a Class IV dam? Any project which impounds less than 15 acre-feet of water to the top of dam….. Top of Dam < 15 acre-feet

16. What is a Class IV dam? andhas less than 15 feet height-of-dam (as measured to the top of dam)…. Top of Dam < 15 ft.

17. What is a Class IV dam? < 150 Acres and which has a drainage area above the dam of 150 acres or less in extent.

18. Permit by Rule Owners and operators of Class III agricultural impoundments, meaning any impoundment used for fish and wildlife, fire control or livestock or crop production and maintenance, where the drainage area is less than one half square mile in extent, must meet only the following requirements:

19. Permit by Rule All necessary local approvals must be obtained; and Design and construction must be supervised by the United States Department of Agriculture, Natural Resource Conservation Service.

20. Permit by Rule The Department may, in its discretion, require the owner or operator of any Class IV dam to obtain a permit and/or to submit any information relating to dam design, construction, operation or maintenance.