1 / 48

Human Factors and Displays for VR Graphics

Human Factors and Displays for VR Graphics. David Johnson. Goals. Learn about Human vision Methods presenting images to users. Visual Bandwidth. Bandwidth of vision is probably greater than other sensory modalities Retina bandwidth ~10 Mbits/sec article Most important sense for VR?

eamon
Download Presentation

Human Factors and Displays for VR Graphics

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Human Factors and Displays for VR Graphics David Johnson

  2. Goals • Learn about • Human vision • Methods presenting images to users

  3. Visual Bandwidth • Bandwidth of vision is probably greater than other sensory modalities • Retina bandwidth ~10 Mbits/sec • article • Most important sense for VR? • IMAX movie of rollercoaster can induce sensation of motion • Images can induce sensations of taste/smell

  4. Why Study Basis of Vision? • If a display can match human capabilities, we are done • If the display can’t, nice to know where to concentrate resources. • Maybe can use tricks to suggest a higher-quality display • Optical illusions

  5. Anatomy of Vision

  6. Eye Anatomy

  7. Blind Spot test • test • Test • Brain fills in

  8. Eye Optics

  9. Accomodation • Change in curvature of lens • Rest focus from 6m to infinity

  10. Light Sensors • Cones • Mostly in the fovea • Blue, green, red/yellow cones, also called short, medium, long • Rods • Sense low levels of light

  11. Visual Acuity • Cycles per degree • Like angular resolution • Humans can resolve 0.93mm spacing at 1m • Fovea is about 1 Mpixel • 1 arc minute at fovea ( 1/60 degree) • 20/20 vision letters are 5 arc minute letters (strokes 1 arc minute) • Around 24K x 24K over field of view • Retina is sensitive to light levels over 10^13 range • Dynamic

  12. Visual Field • One Eye • 120 degrees vertically and 150 degrees horizontally • 60 to nose, 90 to side • 50 up, 70 down • Binocular 200 degrees horizontal • Eye can rotate about 50 degrees

  13. Binocular Vision • Humans have 120 degree binocular overlap • 2 40 degree monocular regions • Depth disparity perception • 0.05mm at 500mm • 4mm at 5m

  14. Eye Motion • Vergence - the motion of the eye to maintain binocular vision • ‘Cross-eyed’ when focus in close • Version – eye movement in the same direction • Duction – motion of one eye • Eye makes compensatory motions when head moving • Shake hand vs. shake head • Saccades – eye movement to use fovea more • Microsaccades – imperceptible motions to maintain excitation of rods and cones

  15. Frame rate • 60Hz frame rate is generally considered important • flicker fusion at ~60Hz • Old movies at low rates but people weren’t sensitized to it

  16. Visual Displays • How do we get computers to interact with the eye?

  17. Overview • display technologies • head-mounted displays (HMD) • projection-based displays

  18. Overview • Characteristics of displays • field of view • stereo display • resolution issues • brightness

  19. HMD • head-mounted displays (hmd) • technology • displays: LCDs, CRTs, OLEDs, other • totally immersive display experience • tend to have small FOV (as compared to a more natural FOV) • often bulky

  20. HMD • two displays provide image for left and right eye • see-through displays used for augmented reality • semi-transparent overlays or video see-through • What did Brooks say was an advantage of video merge vs optical merge?

  21. HMD characteristics • what are important characteristics? • image resolution, brightness, contrast • tied to visual acuity • field of view • the mechanics • ergonomics, mass, moments of inertia

  22. field of view - FOV • field of view - can mean different things • optical field of view - field of view as specified by the HMD optics • rendered field of view - field of view as specified in software • Mapping between the two of them

  23. field of view - FOV • field of regard - the total area over which a user can view • afford visual integration of larger space • for HMDs this is generally 360 degrees • provided the head is tracked • for projection systems, generally closer to 180 degrees • CAVE varies

  24. focus distance virtual image screen eye optics hmd display optics • optics between the image plane and the user’s eye produce a virtual image farther away from the eye • reduces accommodative effort • ideally out a few meters to help cancel out convergence/accommodative rivalry • optics magnify pixel granularity! • other distortions? • Leep optics – radial falloff – needs defocus

  25. HMD displays • CRT-based HMDs • electron beam aimed at phosphorescent screen, resulting in emitted light • generally good picture quality • but often heavier and much more expensive • Now rare

  26. example of CRT-based HMD • Datavisor HiRes, Datavisor 80 Datavisor 80: 1280x1024, 3’/pixel, accommodation at infinity, 80° diagonal fov, 120° with 20% overlap, about 5lbs Datavisor HiRes: 1280x1024, 1.9’/pixel, 42° fov (100% overlap), about 4lbs, uses monochrome CRT w/ color filter shutters

  27. nvis nVisor SX • liquid crystal on silicon (LCoS) • LCD-type device by CRLOpto • 0.9” microdisplay with 1280x1024 resolution • horizontal fov: 47°, weight: 2lbs • good image quality, brightness, and contrast

  28. LCD-based hmds • in general, LCD HMDs have been less expensive and lighter • however, • usually, much lower resolution • poorer image quality • lower brightness, contrast • improvements in LCD technology but VR just now catching up

  29. LCD-based HMDs • Virtual Research V8 • 640x480 resolution • approx 45° fov (100% overlap) • lightweight: ~2lbs • inexpensive: ~$12k

  30. other HMDs • Kaiser • resolution 1024x768 • about $15k • uses active matrix LCD screens • 2.3’/pixel • 40° fov • just over 2lbs • OLED-based HMDs - better brightness than LCDs, 800x600 • good image quality, lighter • $5k, but with low fov (28°) • may have short life span Kaiser ProView XL50 5DT HMD 800

  31. Sensics • First new HMD in some time • Array of microdisplays • OLEDs • Panoramic field of view • 2.9’/pixel

  32. setting up stereo • monocular: image viewed with one eye only • bi-ocular: both eyes see the same image • binocular: each eye sees its own image • HMDs approximate stereo vision by showing a user left and right eye images • what if the person can’t fuse stereo? • What about vergence? • what about IPD? • IPD = inter-pupillary distance • is this important? • most HMDs do not provide enough control over the exact settings

  33. perception and fov/stereo • common explanations for problems in VR: • too small fov • didn’t use stereo • stereo was configured improperly • truth of the matter is that no one really knows in general for all situations • requires specific experimentation with • different setups, tasks, and applications • FOV is likely important for speed of localizing • stereo is likely very important for near field interaction

  34. other pros/cons of HMDs • definite advantages: • fully immersive • disadvantages: • bulky, heavy, obtrusive • poor resolution, mismatch between accommodation/convergence • other comments?

  35. projection displays • setup a projector, aim it at a screen • you’re doing VR research! • actually a little more complex than that • goal is to surround user with the virtual environment • good concept • potentially reduces locomotion abilities • capability to increase resolution dramatically • tiling the display projectors

  36. cave • cave • CAVE Automatic Virtual Environment • developed at U Illinois-Chicago - 1992 • did you know CAVE is trademarked?

  37. stereo with projection vr • with HMDs, stereo vision is potentially easier (minus bad artifacts) • two images, one for each eye • for projection vr, you have two choices • active stereo • passive stereo

  38. active stereo • shutter glasses are required • left and right eye shutters on the glasses synchronize with images coming from projector • crystal eyes • transmitter synced up with graphics/projector system • turns right and left shutters on/off

  39. ia state cave

  40. passive stereo • use the polarization of light to passively send stereo • two projectors per screen, each with different polarizing filters • left and right eyes of glasses allow the correct polarized light through • potentially less expensive • people just wearing “sun glasses”

  41. important stereo issues • generally, very expensive! • requires extremely bright projection systems • projectors must be capable of high refresh rates (120Hz) for active stereo • bright projectors are required due to issue with light efficiency • first off, about half of light is lost due to left/right switching glasses • passive stereo - between 12% and 59% depending on setup • Screen transmission

  42. other painful issues with projection vr • alignment matters • for stereo setups, especially passive stereo, alignment is crucial • for tile-able displays with high resolution • images must overlap and blend

  43. other painful issues with projection vr • actually, should be able to project on any surface • large set of research devoted to • automatic alignment • image blending, color matching • projection onto arbitrary surfaces • not just flat walls

  44. Desktop VR • Also known as “fishtank” VR • Use computer monitor • Track head • Stereo from shutter glasses

  45. vision dome and other spherics

  46. Workbench

  47. Autostereoscopic displays

  48. Volumetric displays • Actuality • Rotating screen

More Related