1 / 16

Junkyard Challenge

Junkyard Challenge. Science Olympiad 2011 Coaches Clinic Division B Justine Cromer, Instructor. Teams construct a device on-site, from materials in their “junk box”, to solve an engineering challenge Impound event & sign-up for start time Team of up to 2 students

drago
Download Presentation

Junkyard Challenge

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Junkyard Challenge Science Olympiad 2011 Coaches Clinic Division B Justine Cromer, Instructor

  2. Teams construct a device on-site, from materials in their “junk box”, to solve an engineering challenge • Impound event & sign-up for start time • Team of up to 2 students • Safety – each student wears protective eye gear w/sides • Goggles not impounded • Times – Build ≤ 30 minutes/Test ≤ 2 minutes • Event supervisor – measuring device and stop watch

  3. junk box requirements • All materials must fit in the box w/a lid • Widest outside dimensions = ≤95.0 cm (L+W+H) • EX: 30 + 30 + 32 = 92cm • Equivalent to 37.4 inches • Buy or construct from scratch • Not used for competition – except as a collection container at state tournament for Ramp challenge • If box is too big, you will be ranked below teams with the correct size

  4. materials • All materials must fix inside the junk box with lid on • Materials must be unaltered and removed from original (store) packaging • Must meet requirements or be ranked below other teams who do • No preassembly allowed

  5. materials • Practice golf balls* ≤ 5 • Plastic • Golf balls* ≤ 8 • Tennis balls* ≤ 10 • Plates* ≤ 10.5 inches • Paper or Styrofoam • Cups* and bowls • Paper or Styrofoam • Straws or hollow stir rods • Paper /soft plastic ≤ 24 cm • Popsicle /craft sticks ~12x1 cm • Toothpicks – wood only • Spools of string, line, thread or tape (non-metallic) • Paper ≤ 8.5x11 inch/ ≤ 20lb • Rubber bands ≤ #64 (1/4”) • Plastic bags ≤ 1 gallon • Scissors (only as a tool) *Must bring at least one

  6. devices – scoring summary CAT A: REGIONALS • Bridge – longest • Ties – height to load • Tower - tallest • Ties – narrowest base • Cantilever – longest • Ties – shortest length to edge of counterbalance CAT B: STATE • Elevated ramp - longest • Ties - tallest start point • Catapult – furthest • Ties – shortest device heights • Bounce – furthest • Ties – smallest bouncing surface

  7. general rules CAT A: REGIONALS • Event supervisor specifies type ball prior to construction • Free-standing cup holds ball • Measurements taken before ball placement • Junk box cannot be used as part of device CAT B: STATE • Teams decide which type of ball(s) and how many to use • 2 min to release all balls • Junk box or container for Ramp device only • Plate for Catapult or Bouncer targets

  8. regionals - bridge • Free-standing bridge that supports cup with ball for at least 5 seconds • Longest open span in mm. • Ties – height to bottom of load

  9. regionals - tower • Tallest free-standing tower that supports cup with ball for at least 5 seconds • Highest to bottom of load • Ties – narrowest base

  10. regionals - cantilever • Longest cantilever laid out from table edge that supports cup and ball for at least 5 seconds • Measured distance parallel to ground • Cannot use box or scissors for counterbalance • Cantilever musttouch table • Ties – edge of tableto far side of balance

  11. state – elevated ramp • Build a free-standing ramp that transports balls from a start point to collection container – no flat areas • Longest distance from “closest” successful start point and front edge of container (ramp not touching container) • Bonus pts for each ball in container • Tie – highestsuccessful startpoint

  12. state - catapult • Free- standing catapult that launches balls to hit a target plate (on first impact) • Requires a trigger – cannot touch ball once on device • Furthest distance from closest edge of catapult to front plate - bonus pts for each ball to hit the plate • Bonus pts for each ball to hit plate • Ties – shortestheight to catapult

  13. state - bounce • Free-standing bouncer that bounces balls to hit a target plate (on first impact) • Student drops balls onto bouncer • Furthest distance from closest edge of bouncer to front plate • Bonus pts for each ball to hit the plate • Ties – tallest heightto center point of bouncing surface

  14. bonus points – state only • Significant advantage for successful hits • D x (n + 1) • D = measured distance • n = number of successful hits • EX – 2 balls hit = 20 x (2+1) = 60 pts • EX – 5 balls hit = 20 x (5+1) = 120 pts • Teams release the balls • Choose plastic golf (≤5), standard golf (≤8) or tennis balls (≤10)

  15. violations • Violations will rank teams below all others w/out violations • Includes…pre-assembly, incorrect use of materials or tools, missing required material, not free-standing, does not meet minimum requirements, or not impounding on time • Also includes outside help once competition begins • Read carefully rules about moving targets and devices after competition begins, i.e. in between shots

  16. Contact Resources: www.soinc.org Score sheet – coming soon Justine Cromer justcromer@gmail.com Head Coach – Kilmer Middle School 4th year in Science Olympiad ??QUESTIONS??

More Related