1 / 23

Simpler - Better - Faster

Submittal Document. Project: _____________________________ Engineer:____________________________ Contractor:___________________________ Submitted By:________________________. Simpler - Better - Faster

dore
Download Presentation

Simpler - Better - Faster

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Submittal Document Project: _____________________________ Engineer:____________________________ Contractor:___________________________ Submitted By:________________________ Simpler - Better - Faster Ginde Multi-Flex Pipes are the latest eco-friendly, superior quality, industrial piping solution to enter the USA Construction industry. 4004 Sardis Drive, Suite 6 Indian Trail NC 28079 www.gindepipesystems.com Toll Free: 866-932-2970

  2. Ginde Pipe • The Ginde System shall be installed using the Ginde P - A – P Multi-Flex Pipe. All connections shall be made using the Ginde Press, Clamp or Compression fittings and must be in accordance with the corresponding Ginde Installation Guidelines. 1 2 3 1 4 5 6 Pipe Colors White pipe for potable water Yellow or Black pipe for Gas Black pipe for HVAC and AC

  3. Applications for test results Ginde Potable Water NSF test to the standard ASTM F 1281 ICC-ES PMG 1067 Listing SABS test report South Africa AMS test report Australia CMA National Test Center China SAI Global Australia TUV CERT Germany SGS Ginde Gold Gas ICC-ES PMG 1142 Listing AGA - American Gas Association SABS test report South Africa AMS test report Australia CMA National Test Center China • SAI Global Australia • TUV CERT Germany • SGS • Liquefied Petroleum Gas South Africa • Ginde AC ASME B31.5 Microbac test report • Colorado America • International Certifications • WRAS - Water Regulation Advisory Scheme Certificate • Certificate for Product Exemption from Quality Surveillance Inspection • ISO9001 International Quality System Certificate • ISO14001 International Environmental Management System Certificate • GOST - Russian National Standard Certificate • Ukraine National Certification Association • SABS - Certificate of South African Bureau of Standards • JASWIC - Joint Acceptance Scheme for Water Installation Components • AENOR - Certificate of Spanish Technical Certification Committee of Plastic.

  4. PZH - Hygiene Certification of the National Institute of Hygiene in Warsaw • DVGW - Certificate of Germany Association of the Gas and Water Industry Technical • Scientific Association • SKZ - Testing Laboratory Accredited by German Accreditation System for Testing GMBH • Certificate of the Slovak National Institute of Hygiene • Certificate of Hungary National Plastics Testing Agency • SGS - Inspection Certificate • Product markings and identification The prescribed marking of product will be done as shown on the ICC PMG 1067 and 1142 listing documentation under the heading IDENTIFICATION. Our tubing are marked showing Ginde USA, Product designation, Tube size, Material designation, Potable water designation (PW ) , Standard dimension ratio, Temperature, Pressure rating, ASTM F 1281, Production code, Inspection agency and Listing number

  5. Accredited Program Product Certification Member of the International Code Council –PMG-1142 and PMG-1067 Manufactured in accordance with theAmerican Society for Testing and MaterialsASTM 1281 F NSF INTERNATIONAL, ASTM F1281, ASTM F1282

  6. Ginde Fittings Science and Technology has proved that if aluminum and copper are in contact with each other after 8 months, it will cause obvious ageing and electrical corrosion, however, Ginde P-A-P composite pipe has a polyethylene pad on the bottom of every fitting that completely separates the aluminum and the brass fittings or valves therefore increases the reliability and length of use. Ginde manufactures a wide range of fittings. Press fittings, compression fittings and clamp fitting are utilized for a vast range of applications. • The white polyethylene pad is clearly visible in the above picture. • For normal composite pipe joints, Ginde supplies three types of typical fittings:

  7. Compression Fitting Impurities found on the surface vanish by way of forging method: this increases the intensity and pressure to enterprise standards and stops the leakage phenomenon. The brass C-Ring in the fitting brings double protection of tightness and non-leakage. For pipe sizes from 3/8” to 1”. • Press Fitting The Press or Crimp Fittings are the most popular products for water reticulation inresidential, commercial and industrial applications. For pipe sizes 1/4” to 2”. Features included in the press fitting series are: • High quality materials • Cold cut and hot forged process • New design and attractive appearance • Heat treated technology • Perfect sealing for long working life • Unique joining tools designed for reliable, faster connections • Wide range of applications used for hot and cold water supply, heating, inert gasses, gas supply, oxygen and air supply or other challenging environmental applications like vibration prone areas.

  8. Clamp Fitting For Industrial and commercial applications where large volumes of fluid are conveyed, the Clamp Fittings are used on the larger size composite pipe. The clamp style fitting series is intended to extend the normal compression fitting range for diameters. It is strongly recommended for multi-layered flex pipes with diameters larger than 1 ½” and higher because of its structural sealing ability thereby avoiding leaks. • Ginde Tools Hand REMS Crimping Tool Manifold for radiant heating Power wrench tool Pipe Bending Springs Pipe Cutting Tool Hand Reamer

  9. Multi Flex Pipes

  10. Press Fitting

  11. Compression Fittings

  12. Clamp Fittings

  13. Manifolds

  14. Warranty • GINDE PIPE SYSTEMS,LLC. ("Ginde") warrants that its pipe and fittings are free from defects in materials and factory workmanship. When your Ginde Multi-Flex Pipes and fittings are installed and operated in accordance with the instructions provided, the following warranty applies: •  GindeMulti-Flex Pipe and fittings carry a warranty for (25) years from the date of warehouse shipment • Parts will be supplied on an ex-warehouse North Carolina, USA basis. Claims for failure will only be honored if the failed parts ,with invoice and delivery note , are returned to Ginde for evaluation. Claims will not be honored for parts that fail due to misapplication of the product, alteration, abuse or misuse, accident, fire, flood or Act of God. • There is no other representation, warranty or condition in any respect, expressed or implied, statutory or otherwise, in contract, tort or otherwise, other than the above, nor will Ginde Pipe Systems, LLC be liable in any way for consequential damages however caused. • GindePipe Systems, LLC disclaims any responsibility for labor incurred in use or service or incidental to the repair or replacement of any part or parts or for loss of time or use of your Ginde, transportation costs, or any other indirect, incidental or consequential damage or inconvenience. • GindePipe products used with refrigeration shall be done with press fittings only. Standard refrigeration  practices must be maintained during piping, installation, evacuation, charging and start up and in accordance with ASHRAE refrigeration piping standards. Contractor shall verify conformance with state and local codes and acceptance by equipment manufacturers warranty requirements.

More Related