1 / 2

S = -90 dBm N = -110 dBm I/N = -6 dB I max = -40 dBm

S = -90 dBm N = -110 dBm I/N = -6 dB I max = -40 dBm. Protection ratio. sensitivity. Avr = 76 dB. Avr = 70 dB. 49 dB. I/N is missing. Therefore it is proposed to change the calculation of the blocking mode “Protection ratio” as follows:.

donna-albert
Download Presentation

S = -90 dBm N = -110 dBm I/N = -6 dB I max = -40 dBm

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. S = -90 dBm N = -110 dBm I/N = -6 dB Imax = -40 dBm Protection ratio sensitivity Avr = 76 dB Avr = 70 dB 49 dB I/N is missing

  2. Therefore it is proposed to change the calculation of the blocking mode “Protection ratio” as follows: Protectionratio Avr_ProtectionRatio=Bmask + C/(N+I) + (N+I)/N – I/N Sensitivity Avr_sensitivity = Bmask– sensitivity_receiver + C/(N+I) - I/N • Taking account of the calculation of the blocking mode “Sensitivity” it requires a correct definition of : • C/(N+I) • I/N • (N+I)/N • Sensitivity and in case choosing I/N or (N+I)/N for the interference calculation • Noise floor

More Related