1 / 12

Schedule April 22, 24: Particle tracking and Profile Models (PS6).

Schedule April 22, 24: Particle tracking and Profile Models (PS6). Work on Part III of Final Project. April 24: 30 min in-class, closed book quiz . April 28, May 1: Group presentations of final project. May 6, May 8: Grid design/parameter selection

dmelvin
Download Presentation

Schedule April 22, 24: Particle tracking and Profile Models (PS6).

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Schedule April 22, 24: Particle tracking and Profile Models (PS6). Work on Part III of Final Project. April 24: 30 min in-class, closed book quiz. April 28, May 1: Group presentations of final project. May 6, May 8: Grid design/parameter selection & final thoughts. PS6 due on May 6.

  2. Sensitivity analysis is used: • In automated calibration (inverse modeling) • (Sensitivity coefficients = • sum of squared residuals/parameter • or h/parameter) • As an uncertainty analysis after calibration

  3. FLOW NETS The streamfunction,  (from Hornberger et al., 1998)

  4. (from Hornberger et al., 1998) A flow net consists of equipotential lines and streamlines.

  5. Particle Tracking (used to trace flow lines) distance = velocity x time

  6. Particle Tracking (used to trace flow lines) Groundwater flow model MODFLOW Note: need to input effective porosity, ne v = KI / ne Particle tracking code MODPATH, Path3D

  7. Particle tracking simulates advection of contaminant “particles”. Transport models (e.g., MT3D) simulate advection, dispersion and chemical reactions. Retardation caused by linear adsorption reactions can be simulated using particle tracking, since the velocity can be adjusted: vc = v/Rd Rd is the retardation coefficient.

  8. Steps in Particle Tracking • Need to interpolate velocities from nodal • point values since particle tracking is done • in a continuous coordinate system. • Need to track the movement of the particles • in the computed velocity field.

  9. Interpolation Schemes • Linear (MODPATH, Path3D) • Bilinear • Reverse distance (FLOWPATH)

  10. Tracking Schemes Semianalytical (MODPATH) Euler (FLOWPATH) Runge Kutta (Path3D) Taylor Series (WHPA)

  11. Directions for using Version 3 of MODPATH in GWV • In the MODFLOW packages window, • set all the unit numbers in the cell by cell flow unit number • column to the same value (e.g, 51). • In Model>MODPATH>Packages, select Version 3.

  12. Hornberger et al., 1998. Elements of Physical Hydrology, The Johns Hopkins Press, Baltimore, 302 p.

More Related