1 / 8

Contact angle measurements in relation with surface conditions

Contact angle measurements in relation with surface conditions . Sundaravadivel Rajarajan Liu Nanobionics Lab April. 27 th 2010. Outline. Introduction Cassie and Wenzel States Experimental Setup Results Future Goals. Introduction. Surface wetting

didier
Download Presentation

Contact angle measurements in relation with surface conditions

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Contact angle measurements in relation with surface conditions SundaravadivelRajarajan Liu Nanobionics Lab April. 27th 2010

  2. Outline • Introduction • Cassie and Wenzel States • Experimental Setup • Results • Future Goals

  3. Introduction • Surface wetting • Ability of a liquid to maintain contact with a solid surface • Degree of wetting and contact angle • Contact angle dependency • Strong dependency on the morphology of the surface. • Cassie and Wenzel state • Stable equilibrium state = Lower energy state

  4. Microstructured Surface – Cassie and Weznel State Formulae Cassie State a b a b h h h Weznel State

  5. Experimental Setup • Test the contact angle of water droplet on different surface structures • Different pitch, height and denseness of nanopillars • Objective of experiment • Test if results match with theory

  6. Experimental Results • Pillar Height • Green and Blue lines • Increasing pillar height increased contact angle • Diameter of Pillars • Red and Blue lines • Increasing diameter reduced contact angle • Density of Pillars • Increasing density increased contact angle

  7. Future Goals • Able to fabricate a very hydrophobic surface • Apply the concept of Electrowetting • Modifying contact angle by applying a voltage • Change contact angle at various positions of the droplet • Surface distortion causes droplet movement • Useful application in Lab-on-a-chip

  8. Thank You

More Related