1 / 76

Applications of carbon nanotubes

Applications of carbon nanotubes. David Allred Dept of Physics & Astronomy, BYU 734-0418, 422-3489. Multiwall tubes. CVD system adaptation and qualification. Differences at BYU Furnace length and number of zones Gas control via MFC- We calibrate. Tube Diameter same.

didier
Download Presentation

Applications of carbon nanotubes

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Applications of carbon nanotubes David Allred Dept of Physics & Astronomy, BYU 734-0418, 422-3489

  2. Multiwall tubes

  3. CVD system adaptation and qualification. Differences at BYU • Furnace length and number of zones • Gas control via MFC-We calibrate. • Tube Diameter same

  4. CVD system adaptation and qualification. Differences at BYU • Furnace length and number of zones • Gas control via MFC- We calibrate.

  5. CVD system adaptation and qualification. Differences at BYU • Furnace length and number of zones • Gas control via MFC- We calibrate.

  6. Jon Bryan

  7. High Aspect Ratio Microfabrication by Chemical Infiltration of Carbon Nanotube Frameworks allred@byu.edu MRS 2009 Talk by Prof. Robert C. Davis Department of Physics and Astronomy Brigham Young University

  8. CNT MEMS Researchers BYU Physics David Hutchison Brendan Turner Katherine Hurd Matthew Carter Nick Morril Jun Song Adam Konniker Ricky Wymant Taylor Wood Dr. Richard Vanfleet Dr. Robert Davis Dr. David Allred • BYU Mechanical Engineering • Quentin Aten • Dr. Brian Jensen • Dr. Larry Howell National Science Foundation Brigham Young University Environment for Undergraduate Mentoring Grant Partial funding provided by Moxtek Inc.

  9. 30 nm Al2O3 (Barrier Layer) Si VACNT growth details • Pattern Fe by lift-off • Heat to 750 °C in H2: Ar • Ar : H2 : C2H4 at 70 : 500 : 700 sccm 1-15 nm Fe

  10. SEM - VACNT forest Can top surface and edge roughness be improved? 100X – 50 µm holes 4500X – 3 µm holes 30000X – edge

  11. Light Photoresist 1-15 nm Fe 30 nm Al2O3 (Barrier Layer) Si VACNT growth process • Photolithography & lift-off Photoresist Photoresist

  12. Dependence on Fe Thickness 15 nm 5.5 nm 2 nm < 1 nm Good repeatability Rate strongly dependant on thickness

  13. 2 nm Fe on Al2O3 • Small voids (< 200 nm across) • Sharp features (few stray tubes); Sidewall roughness < 200 nm • High growth rate ~50 µm/min

  14. TEM Grid

  15. Bistable Mechanisms

  16. Nanotube “forest” growth Height: up to 1mm+ Feature size: a few microns Speed: 10-100µm/min Density:

  17. Vertically Aligned Carbon Nanotube (VACNT)Growth Individual nanotubes wander but… …forest grows perpendicular to growth substrate Extraordinary growth among materials growth systems

  18. High Aspect Ratio Micromachining Deep Reactive Ion Etching (Si) MARIO Process (Titanium) “High-aspect-ratio bulk micromachining of titanium,” Aimi et al., Nature Mat. 3, 103-5 (2004) “Vertical Mirrors Fabricated by DRIE for Fiber-Optic Switching Applications,” C. Marx et al., J. MEMS 6, 277, (1997) LIGA process (photoresist) SU-8 / C-MEMS (photoresist / carbon) “C-MEMS for the Manufacture of 3D Microbatteries,” Wang et al., Electrochem. Solid-State Lett. 7 (11) A435-8 (2004) “Micromechanisms,” H. Guckel, Phil. Trans. R. Soc. Lond. 353, 355-66 (1995)

  19. VACNT: Extreme Aspect- Ratio Microstructures 3 µm hole pattern 400 µm tall • Smooth sidewalls … <1 micron roughness • Tall… up to several millimeters 20 µm 100 µm

  20. Patterned forest structure Height: up to several milimeters Lateral feature size: down to 1 micron Speed: 10-100 µm/min Density:

  21. Low density, weakly bound material As-grown forests are flimsy and tear off the surface at the slightest touch

  22. Dense Nanotube Structures

  23. Liquid Induced Densification Dried structure Submerged nanotube structures

  24. Vapor Condensation Induced Densification -- Lines Longer exposure to vapor Shorter exposure to vapor

  25. Surface forces dominates Unequal angles become equal angles. Final structure depends on initial structure surface forces Difficult to control what results!

  26. Horizontal Aligned CNT films

  27. AIST Japan group working on in-plane aligned CNT MEMS Yuhei Hayamizu, Takeo Yamada, Kohei Mizuno, Robert C. Davis, Don N. Futaba, Motoo Yumura, & Kenji Hata Nature Nanotechnology 3, 241 (2008).

  28. Microstructured VACNT Composites

  29. Leave the nanotubes vertical?

  30. VACNT Composites

  31. Filling in with Si by LPCVD

  32. Nearly complete Si infiltration Side view Top view 500 nm Side view Cross section >93% solid Si 1 µm 500 nm

  33. Microstructure: Poly-Si Between tubes, dark field

  34. Properties: Poly-Si Alumina layer Iron Si Substrate Between tubes, dark field

  35. Properties: Poly-Si Between tubes, dark field

  36. VACNT Composite MEMS Process “floor layer”

  37. VACNT Templated Microstructures 500 µm

  38. Bi-stable Mechanism M2U00075.MPG

  39. Comb Drive 500 µm f

  40. Bistable Mechanisms Thermomechanical In-Plane Microactuator (TIM)

  41. Solid High Aspect Ratio Structures

  42. A variety of materials? Filled with amorphous Si: Filled with amorphous C:

  43. High aspect ratio structures in a variety of materials?Si, SiNx, C and SiO2 FROM: Chemical Vapor Deposition, ed. Jong-Hee Park, ASM International (2001)

More Related