1 / 20

Project 2: Crane Model

Project 2: Crane Model. Design brief: To design and make a bamboo crane model for learning purpose. Group : 4 members. Duration: 3 cycles. Project 2: Crane Model. Material provided: bamboo sticks - @~10g (200 mm long), a wooden base. >250mm. Project 2: Crane Model. Requirement :

Download Presentation

Project 2: Crane Model

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Project 2: Crane Model Design brief: To design and make a bamboo crane model for learning purpose Group :4members Duration:3 cycles

  2. Project 2: Crane Model Material provided: bamboo sticks - @~10g (200 mm long), a wooden base

  3. >250mm Project 2: Crane Model Requirement : 1) The bamboo crane model should not be shorter than 250mm long. Bench

  4. Bench Project 2: Crane Model Requirement : 2) The model should be gripped firmly on the bench and weights are placed one by one at the end of the crane model until it breaks down so as to test the loading ratio.

  5. Maximum Loading Weight of the Crane Model Loading Ratio = Project 2: Crane Model Requirement : 3) The model must be built with the bamboo sticks provided by the teacher and be fastened with hot melt glue.

  6. Project 2: Crane Model • Testing methods: • Measure the weight of the crane model with the wooden base by the electronic balance.

  7. Project 2: Crane Model Testing Methods: 2) Grip the crane model on the bench by a bench hold fast. 3) Hang the hook at the end of the crane model and place weights one by one on the hook base until the model breaks down.

  8. Project 2: Crane Model • Testing Methods: • Count the weights used. • 5) Calculate the loading ratio. Higher loading ratio is recorded, higher mark will be given.

  9. Bench Project 2: Crane Model This is only a sample. Don’t copy!

  10. Project 2: Crane Model Information: Search for information about frame and structure on internet.

  11. Project 2: Ccrane Model Design consideration: Weight of the crane model Information Stability Solution Special features of bamboo stick Structure

  12. Project 2: Crane Model Suggested Procedures Design Considerations Initial Ideas Final Idea Solution Make a crane model Testing Evaluation

  13. Project 2: Crane Model • Safety: • Must take care in using the hot melt gun in order to avoid to be burnt. • b) Never touch the melted glue directly.

  14. Project 2: Crane Model Assessment:

  15. Project 2: Crane Model Reference

  16. Project 2: Crane Model

  17. Project 2: Crane Model

  18. Project 2: Crane Model

  19. Project 2: Crane Model

  20. Project 2: Crane Model

More Related