1 / 54

SWEDE Conference San Antonio 11 May 2007

Ethics for the Practicing Engineer—Engineering Responsibilities. SWEDE Conference San Antonio 11 May 2007. Texas State Board Rules. Continuing Education Program— Jan. 2004 The 78th legislature passed SB277 mandating a CEP program administered by State Board

december
Download Presentation

SWEDE Conference San Antonio 11 May 2007

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Ethics for thePracticing Engineer—Engineering Responsibilities SWEDE Conference San Antonio 11 May 2007

  2. Texas State Board Rules • Continuing Education Program—Jan. 2004 • The 78th legislature passed SB277 mandating a CEP program administered by State Board • Based on self-determination of activities and content, and accounting by the license holder • Requires 15 PDH (professional development hours) to include 1 PDH professional ethics, each year • Carry-over of up to 15 PDH is allowed • Required for renewal after March 2005 • http://www.tbpe.state.tx.us/downloads/131.139%20-%20Adopted.htm Engineering Responsibilities

  3. “Responsible” • Responsible: • 1) liable to be called on to answer; liable to legal review or in case of fault to penalties; • 2) able to answer for one’s conduct and obligations; able to choose for oneself between right and wrong... (Webster’s Ninth New Collegiate Dictionary) Engineering Responsibilities

  4. One philosophy of responsibility • Cicero’s Creed: "Salus populi suprema est lex," Marcus Tullius Cicero, 106 - 43 BC • “The safety of the public shall be the[ir] highest law" (Broome 1986) • An early statement of the engineer’s responsibility Engineering Responsibilities

  5. The primary responsibility of engineers… • The engineer is responsible for making sure his work does not harm the public health, safety or welfare (?) • The engineer is responsible for protecting the public health, safety and welfare (?) • The engineer is responsible for protecting the public health, safety and welfare, to the extent that his work affects these (?) Engineering Responsibilities

  6. Ways in which harm can be caused • Negligently--by failing to exercise due care • Recklessly--acting in a way that we recognize might cause harm • Intentionally--not common for professionals to cause harm by intent Engineering Responsibilities

  7. Responsibilities of engineers • Legal responsibilities: Not to cause harm; to compensate when harm is caused; to practice in accord with Engineering Practices Act • Moral responsibilities: To recognize and discharge our duties while satisfying our obligations to the public; understand and adhere to a Code of Ethics Engineering Responsibilities

  8. The Engineering Practices Act--a Code of Ethics for the Texas PE • Engineers Shall Protect the Public • Engineers Shall Be Objective and Truthful • Engineers' Actions Shall Be Competent • Engineers Shall Maintain Confidentiality of Clients • Engineers' Responsibility to the Profession • Action in Another Jurisdiction Engineering Responsibilities

  9. Engineers Shall Protect the Public • Shall be entrusted to protect the public (anyone who might be affected) • Shall not perform any function which might endanger • Shall notify parties or Board of any practices which might endanger • Should examine the environmental impact of their actions and projects Engineering Responsibilities

  10. Engineers Shall Be Objective and Truthful • Shall issue only objective and truthful statements, and not mislead • Disclose any possible conflict of interest • Properly seal his/her work; modify other engineers’ work only in prescribed situations Engineering Responsibilities

  11. Engineers' Actions Shall Be Competent • Shall practice only in their area of competence, when qualified by education and/or experience • Shall not express an opinion in a legal forum contrary to generally accepted engineering practice without disclosing basis and rationale for that opinion. Engineering Responsibilities

  12. Engineers Shall Maintain Confidentiality of Clients • Shall act as faithful agents for clients or employers • Reveal confidences and private information only when… • consent is given, • required by court order, or • if undisclosed, the information constitutes a threat to the public Engineering Responsibilities

  13. Engineers' Responsibility to the Profession • Shall engage in professional and business activities only in honest and ethical manner • Shall endeavor to meet all applicable professional practice requirements, statutes, regulations, laws, etc. • Exercise reasonable care to prevent conduct by associates or employees contrary to the Act Engineering Responsibilities

  14. Engineers' Responsibility to the Profession, cont’d... • Exercise reasonable care to prevent association of your name, etc., with any venture that might be fraudulent, dishonest, or illegal… Engineering Responsibilities

  15. Engineers' Responsibility to the Profession, cont’d... • Conduct affairs in a manner respectful of the client, employees, involved parties… • honest billing practices, do not perform unnecessary work, avoid unprofessional language, harassment, intimidation… • do not aid or abet an unlicensed person in the unlawful practice of engineering • do not maliciously injure the reputation of another or retaliate against someone who gives an unfavorable reference in good faith Engineering Responsibilities

  16. Engineers' Responsibility to the Profession, cont’d... • Conduct affairs in respectful manner, cont’d... • do not give or promise any gift, favor or commission to secure work • do not accept compensation from more than one party for the same work • do not solicit work with false or misleading advertising • do not submit competitive bids (cost) to any state governmental entity Engineering Responsibilities

  17. Action in Another Jurisdiction • Do not practice or offer to practice engineering in violation of any laws in other jurisdictions Engineering Responsibilities

  18. Some issues with the Texas State Board... • Industrial exemption--State Board has stated an intention of terminating the industrial exemption • Who is bound by the Engineering Practices Act? • Professional Engineers • Engineer employees? Engineering Responsibilities

  19. Missouri City Antenna Tower Collapse • For more details, see: • http://ethics.tamu.edu/ethics/tvtower/tv3.htm#analysis Engineering Responsibilities

  20. Scenario • Antenna & 1000 ft. tower designed by engineer • Contractor (rigger) awarded erection contract Engineering Responsibilities

  21. Tower erection method Tower (about 1000 ft) Gin pole Tower sections (40 ft) Antenna Section Engineering Responsibilities

  22. Scenario, cont’d... • During erection, rigger realizes lifting points on antenna sections can’t be used without fouling antenna baskets • Rigger asks to remove baskets and replace them after erection • Engineer denies riggers’ request (the last contractor who removed baskets caused expensive damage to antennas) Engineering Responsibilities

  23. Scenario, cont’d... • Rigger develops a plan to mount extension on antenna section to lift it • Rigger asks engineer to review the plan • Engineer declines to review riggers’ plan to mount extension on antenna, citing increased liability Engineering Responsibilities

  24. Antenna lifting method--riggers’ modification Engineering Responsibilities

  25. Scenario, cont’d... • Rigger proceeds with lift of antenna • Extension boom fails, antenna falls (striking stay cable?), tower falls, seven workers are killed Engineering Responsibilities

  26. Free body diagram of antenna section during lift, with rigger’s extension boom Engineering Responsibilities

  27. Engineering Responsibilities

  28. Engineering Responsibilities

  29. Antenna section after collapse Engineering Responsibilities

  30. Extension boom and failed u-bolts Engineering Responsibilities

  31. Wreckage of antenna and crane Engineering Responsibilities

  32. Some questions... • Were the engineer’s actions the right actions? • No, seven workers died. Engineering Responsibilities

  33. Some questions... • What model of responsibility did the engineer follow? • Minimalist model? • Reasonable care model? • Good works model? • Should the engineer’s moral responsibility take precedence over his legal responsibility? Engineering Responsibilities

  34. Some questions... • Was the engineer’s responsibility for a safe and workable design met? • ...with lifting lugs that could not be used by the rigger? Engineering Responsibilities

  35. Were the riggers morally responsible for this accident? • Did they recognize that the modification they attempted required engineering skills to accomplish? • Could they be expected to know this? • Did they ask an engineer for assistance? Engineering Responsibilities

  36. What could the engineer have done differently? • Agree to review the riggers’ plans? • Allowed riggers to remove antenna baskets? • Offer to design a better extension boom? • Decline to review the plans, but suggest to the riggers that they should hire an engineer to review their plans? Engineering Responsibilities

  37. Don’t ignore your moral responsibility on the road of life Engineering Responsibilities

  38. Three models of professional responsibility • Minimalist or Malpractice model • Reasonable Care model • Good Works or Supererogation model Engineering Responsibilities

  39. Minimalist or Malpractice model of responsibility: • Engineers have a duty only to adhere to accepted standards of practice, fulfill only basic duties prescribed by terms of employment. • Those who would follow this model might be most concerned with not doing anything “wrong”. Engineering Responsibilities

  40. Reasonable Caremodel of responsibility: • Adhere to accepted standards of practice, and... • Take reasonable care to ensure that mistakes are prevented and the public welfare is protected • Exercise and apply skill, ability and judgement reasonably and without neglect • keep abreast of evolving changes in knowledge and practice • recognize when minimal standards of practice might not be sufficient to prevent a harm, and take additional actions to prevent such a harm in those cases Engineering Responsibilities

  41. Characteristics of theReasonable Care model • Concern for preventing harm, rather than trying to prevent causing harm • Oriented towards the future, toward avoiding problems and protecting the public • Attitude of concern or caring about public, client, environment... Engineering Responsibilities

  42. Good Works (Supererogation) model of responsibility: • “...above and beyond the call of duty.” • Example: A consulting engineer offers to design a parking lot for her church at her cost, with no charge for her time. • Example: Peter Palchinski, the Marxist mining engineer who promoted improvements to workers’ living conditions, and was executed by Stalin. Engineering Responsibilities

  43. Responsibilities of engineers • Legal responsibilities: Not to cause harm; to compensate when harm is caused; to practice in accord with Engineering Practices Act • Moral responsibilities: To recognize and discharge our duties while satisfying our obligations to the public; understand and adhere to a Code of Ethics Engineering Responsibilities

  44. A hypothetical scenario... • Suppose an airline maintenance engineer contacts an airframe manufacturer with a question about a new maintenance procedure that his crews have proposed, indicating that his crews have experimented with this procedure and have demonstrated that it can significantly reduce maintenance time and costs. Engineering Responsibilities

  45. A hypothetical scenariocont’d... • The procedure in question involves the removal of jet engine & pylon as a unit for replacement of a spherical bearing which served to support the engine/pylon. • Manufacturer’s recommended procedure is to remove the engine, then the pylon. • Maintenance personnel wish to remove the engine & pylon as a unit, supporting the engine with an engine stand mounted on a forklift, positioned at the cg of the engine/pylon unit. Engineering Responsibilities

  46. Engine and pylon assy... 6 ft 1,865 lb (pylon) Engineering Responsibilities 13,477 lb (pylon + engine)

  47. In pairs, discuss and answer the following questions... • How would the manufacturer respond if he follows... • minimalist model of responsibility? • reasonable care model? • good works model? • What responsibilities do you think the airframe manufacturer’s engineer has? How should he/she respond to this request? Engineering Responsibilities

  48. The case isn’t hypothetical... • In 1979, improper servicing procedures during maintenance of a American Airlines DC-10 caused undetected fractures in the bulkhead supporting the pylon. • Eight weeks later on 25 May, during takeoff from Chicago O’Hare, AA Flight 191 lost the No. 1 engine from the left wing, severing hydraulic control and power lines near that pylon, and causing loss of control, crash, and 273 deaths. Engineering Responsibilities

  49. DC-10 case, continued... • American Airlines maintenance crews were using forklifts to remove the DC-10 engines for pylon mounting bearing replacement, a shortcut that reduced service efforts by 200 man-hours per engine. • McDonnell-Douglas (the manufacturer) knew that AA and Continental were using this non-standard procedure, and suspected that this might increase the risk of airframe damage. Engineering Responsibilities

  50. DC-10 case, continued... References: NTSB Report on the 1979 Chicago Crash WASHINGTON, D.C. 20594, December 21, 1979 (found on web at...http://www.rvs.uni-bielefeld.de/publications/Incidents/DOCS/ComAndRep/OHare/NTSB/COPY/ohare-full.html) Engineering Responsibilities

More Related