1 / 41

Landscaping PPE

Landscaping PPE. Related Work Activities. Creating sharp flying debris Using a chainsaw Cutting or chipping concrete Using loud machinery Handling harmful chemicals Applying pesticides and other harmful chemicals. Hazardous Conditions & Unsafe Acts. Using a chainsaw without PPE;

dayton
Download Presentation

Landscaping PPE

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Landscaping PPE

  2. Related Work Activities • Creating sharp flying debris • Using a chainsaw • Cutting or chipping concrete • Using loud machinery • Handling harmful chemicals • Applying pesticides and other harmful chemicals

  3. Hazardous Conditions & Unsafe Acts • Using a chainsaw without PPE; • Cutting or chipping concrete without eye protection; • Weed eating or mowing without hearing protection; • Handling chemicals without skin protection; • Spraying chemicals without respiratory protection.

  4. Potential Outcomes • Hearing damage • Eye puncture and damage • Skin irritation • Nose and throat irritation • Lung disease • Amputations

  5. Personal Protective Equipment • Examples of PPE: • Eye (safety goggles, glasses) • Face (safety shields) • Head (hard hat) • Feet (safety shoes) • Hands and arms (gloves) • Hearing (earplugs, muffs) • Respiratory (respirators)

  6. Eye Protection • Wear goggles or face shield around: • Flying chips or particles; • Electrical sparks; • Chemical gases or vapors; • Harmful light; • Fertilizer solutions, acids, pesticides, etc; • Dust • Swinging objects like ropes or chains

  7. Safety Glasses • Made with metal/plastic frames • Side shields may be needed • Used for moderate impact particles

  8. Safety Goggles • Protect the eyes from impacts, dust, and splashes.

  9. Eye Protection • Goggles only provide eye protection, however face shields protect the whole face. • Be certain the protective eyewear is approved against the hazard for which it is being used.

  10. Keeping Eyewear Clean • Eyewear should be clean and defogged • Clean lenses thoroughly with soap and water • Disinfect eyewear that has been exposed to a hazardous substance or worn by someone else • Store and clean eye wear in a closed, dustproof case (plastic bags). • Discard pitted or scratched eyewear

  11. Additional Information • Eye and Face Protection eTool

  12. Head Protection • Hard hats protect the head on overhead objects and from falling or flying objects: • Working below other workers or machinery , such as a bucket lift. • Working in or under trees with work overhead • Working around or under conveyor belts • Working around exposed energized conductors

  13. Hard Hats • Wear hard hats made of slow burning, water-resistant molded plastic. • The hard outer shells resist blows and penetration from above • Shock absorbing suspensions (headband and straps) act as an impact barrier between hat and head • Slow-burning materials protect against fires and electrical burns

  14. Levels of Hard Hat Protection

  15. Hard Hat Inspection • Inspect the hard hat before use • Look for: • Headband stretched or worn • Headband fits comfortably • Shell is dented, cracked, or visibly damaged • Check hard hat after use, if damaged, discard it • Wash the shell frequently with hot soapy water • Store hats in a cool, dry place

  16. Protecting Legs and Feet • Legs and feet injuries: • Cuts from cutting equipment • Heavy objects that might fall on feet • Sharp objects such as nails or spikes • Hot or wet surfaces • Slippery surfaces

  17. Leg Protection • Chainsaw chaps • Protect legs from injury when using tools such as chainsaws.

  18. Foot Protection • Safety shoes should be impact resistance with steel toes. • Safety-toe shoes are nonconductive and prevent your feet from completing a circuit • Shoes with good tread provide traction on slippery surfaces

  19. Hand Protection • Gloves can protect hands and forearms from cuts, abrasions, burns, punctures, contact with hazardous chemicals, and electric shock

  20. Using Gloves • Choosing the right glove for the job is important • Example: Choosing a cotton glove to work with chemicals is a bad choice. • Some situations are not appropriate for gloves such as working with moving machinery

  21. Levels of Glove Protection

  22. Noise • Noise in the workplace interferes with communication and disrupts concentration • Sound is measured in decibels • Noises of 85 decibels or greater affects your hearing if you work around it for eight hours a day.

  23. Noisy Workplaces

  24. Hearing Protection • When noise exposure cannot be controlled by either engineering controls, use hearing protection. • Earmuffs and earplugs can reduce noise levels if used properly. • It is a good idea to use hearing protection when average noise levels exceed 80 dB.

  25. Hearing Protection Devices • Formable earplugs: • Spongy, soft compressed, or shaped prior to insertion • Disposable-not for reuse • Pre-molded ear plugs • Molded to fit ear • Earmuffs • Adjustable headband with soft cups that seal around the ear

  26. Protecting Yourself • This worker is taking no chances when it comes to protecting himself from the hazards of hedge trimming.

  27. Protection for Pesticide Application • Dermal exposure is the most common • PPE should be worn to reduce skin exposure • Types of exposure when using pesticides: • Dermal – Getting pesticide on your skin • Oral – Swallowing pesticide • Inhalation – Breathing in pesticide • Ocular – Getting pesticide in the eyes

  28. What A Chemical Label Tells You • The label on the pesticide includes: • The chemical formulation • Signal words: Warning, Caution • Precautions • PPE recommendations • Application method • Projected length of exposure

  29. Read the Label!

  30. Respiratory Protection • Activities that may require respiratory PPE: • Handling and applying pesticides • Working around heavy dust in greenhouses • Working around mold • Spraying paint • Using solvents or other chemical irritants • Working around allergens

  31. Types of Respirators • Three types of respirators for normal work activity: • Particulate respirator • Use a filter to trap solid particles like dust or mold • Gas/vapor respirators • Use a cartridge to absorb gases and vapors • Combination respirators • Have a filter for particles and a cartridge for gas and vapor

  32. Selecting a Respirator • Particulate respirators • Type 95 = 95 % efficient; appropriate for most dust, mold, or mist • Type 97 = 97% efficient; higher level of protection • Type 100 or HEPA = 99.7% efficient; used with highly toxic substances • Gas/Vapor respirators • White= Acid gas • Black = Organic vapors • Green= Ammonia gas • Yellow= Acid gas and organic vapor • Olive Green= Multi-gas combinations

  33. Dust Masks This “dust mask” is not approved for respiratory protection. NIOSH approval info

  34. Fit Testing • Positive pressure test • Block off the exhalation valve with the palm of your hand, • Gently exhale, then hold it for 10 seconds, • Smile, then open your mouth. • A slight bulge and no air leaks is a proper fit. • Negative pressure test • Place the palms of your hands over the cartridge openings, and gently inhale, holding your breath for 10 seconds. • Smile, then open your mouth. If the face-piece is collapsing slightly and you don't detect any air leaks, you have a proper fit.

  35. Cleaning and Storing Respirators • Respirators should be cleaned after each use except disposable respirators or dust filter masks. • Wash reusable face pieces and the inhalation and exhalation valves with a mild disinfecting soap. They should be rinsed and air dried before storing. • Store clean, dry respirators in a zip-sealed plastic bag in a cool, dry cabinet specifically designated for storage.

  36. Respiratory Protection Program • Your employer shouldhave a written Respiratory Protection Program • It includes: • When a respirator is required • Medical evaluations needed • How to select a respirator • How to use respirators • Review your employers RPP

  37. Training • Employees required to use PPE must be trained to know at least the following: • When PPE is necessary; • What type of PPE is necessary; • How to properly put on, take off, adjust, and wear; • Limitations of the PPE; • Proper care, maintenance, useful life and disposal.

  38. Additional Information • Respiratory Protection eTool • http://www.osha.gov/OshDoc/data_Hurricane_Facts/respirators.pdf

  39. Summary • Using eye and face protection when debris is flying around is recommended • Use head, leg, hand, and foot protection when using a chainsaw • Use hearing protection when using noisy tools • Respiratory protection may be recommended during certain job activities, check with chemical labels or your employer for details

More Related