1 / 15

CCNP 300-115 Practice Test Dumps

MrCerts provides valid Cisco 300-115 exam dumps that are verified by expert IT professionals. We have Implementing Cisco IP Switched Networks (SWITCH ) 300-115 exam questions of CCNP with verified answers that can be of great help for students looking for Implementing Cisco IP Switched Networks (SWITCH ) questions answers. https://www.mrcerts.com/300-115-test.html

davidalan12
Download Presentation

CCNP 300-115 Practice Test Dumps

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Cisco 300-115 Exam Implementing Cisco IP Switched Networks (SWITCH )

  2. Cisco 300-115 Exam Don’t need to take any stress about the 300-115 Exam. We provide you 300-115 Real Exam Questions Along with Updated Test Engine. https://www.mrcerts.com/300-115-test.html

  3. Features Real Exam Questions Answers PDF + Practice Test Desktop Practice test Free Demo https://www.mrcerts.com/300-115-test.html

  4. Cisco 300-115 Questions Answers QUESTION 1 Which technique automatically limits VLAN traffic to only the switches th at require it? A. access lists B. DTP in nonegotiate C. VTP pruning D. PBR Correct Answer: C https://www.mrcerts.com/300-115-test.html

  5. Cisco 300-115 Questions Answers QUESTION 2 What effect does the mac address-table aging-time 180 command have on t he MAC address-table? A. This is how long a dynamic MAC address will remain in the CAM table. B. The MAC address-table will be flushed every 3 minutes. C. The default timeout period will be 360 seconds. D. ARP requests will be processed less frequently by the switch. E. The MAC address-table will hold addresses 180 seconds longer than the d efault of 10 minutes. Correct Answer: A https://www.mrcerts.com/300-115-test.html

  6. Cisco 300-115 Questions Answers QUESTION 3 While working in the core network building, a technician accidently bumps the fiber connection between two core switches and damages one of the pairs of fiber. As designed, the link was placed into a non-forwarding state due to a fault with UDLD. After the damaged cable was replaced, the link did not recover. What solution allows the network switch to automatically recover from such an issue? A. macros B. errdisable autorecovery C. IP Event Dampening D. command aliases E. Bidirectional Forwarding Detection https://www.mrcerts.com/300-115-test.html Correct Answer: B

  7. Cisco 300-115 Questions Answers QUESTION 4 A network engineer deployed a switch that operates the LAN base feature set and decides to use the SDM VLAN template. The SDM template is causing the CPU of the switch to spike during peak working hours. What is the root cause of this issue? A. The VLAN receives additional frames from neighboring switches. B. The SDM VLAN template causes the MAC address-table to overflow. C. The VLAN template disables routing in hardware. D. The switch needs to be rebooted before the SDM template takes effect. Correct Answer: C https://www.mrcerts.com/300-115-test.html

  8. Cisco 300-115 Questions Answers QUESTION 5 An access switch has been configured with an EtherChannel port. After configuring SPAN to monitor this port, the network administrator notices that not all traffic is being replicated to the management server. What is a cause for this issue? A. VLAN filters are required to ensure traffic mirrors effectively. B. SPAN encapsulation replication must be enabled to capture EtherChannel destination traffic. C. The port channel can be used as a SPAN source, but not a destination. D. RSPAN must be used to capture EtherChannel bidirectional traffic. Correct Answer: C https://www.mrcerts.com/300-115-test.html

  9. Cisco 300-115 Questions Answers QUESTION 6 Refer to the exhibit. https://www.mrcerts.com/300-115-test.html

  10. Cisco 300-115 Questions Answers What is the result of the configuration? A. The EtherChannels would not form because the load-balancing method must match on the devices. B. The EtherChannels would form and function properly even though the load-balancing and EtherChannel modes do not match. C. The EtherChannels would form, but network loops would occur because the load-balancing methods do not match. D. The EtherChannels would form and both devices would use the dst-ip load-bala ncing method because Switch1 is configured with EtherChannel mode active. Correct Answer: B https://www.mrcerts.com/300-115-test.html

  11. Cisco 300-115 Questions Answers QUESTION 7 A network engineer tries to configure storm control on an EtherChannel bundle. What is the result of the configuration? A. The storm control settings will appear on the EtherChannel, but not on the B. associated physical ports. B. The configuration will be rejected because storm control is not supported for EtherChannel. C. The storm control configuration will be accepted, but will only be present on the physical interfaces. D. The settings will be applied to the EtherChannel bundle and all associated physical interfaces. https://www.mrcerts.com/300-115-test.html Correct Answer: D

  12. Cisco 300-115 Questions Answers QUESTION 8 What is the function of NSF? A. forward traffic simultaneously using both supervisors B. forward traffic based on Cisco Express Forwarding C. provide automatic failover to back up supervisor in VSS mode D. provide nonstop forwarding in the event of failure of one of the mem ber supervisors Correct Answer: D https://www.mrcerts.com/300-115-test.html

  13. Cisco 300-115 Questions Answers QUESTION 9 After UDLD is implemented, a Network Administrator noticed that one port stops receiving UDLD packets. This port continues to reestablish until after eight failed retries. The port then transitions into the errdisable state. Which option describes what causes the port to go into the errdisable state? A. Normal UDLD operations that prevent traffic loops. B. UDLD port is configured in aggressive mode. C. UDLD is enabled globally. D. UDLD timers are inconsistent. Correct Answer: B https://www.mrcerts.com/300-115-test.html

  14. Cisco 300-115 Questions Answers QUESTION 10 After reviewing UDLD status on switch ports, an engineer notices that the.” Which statement describes what this indicates about the status of the port? A. The port is fully operational and no known issues are detected. B. The bidirectional status of “unknown” indicates that the port will go into the disabled state because it stopped receiving UDLD packets from its neighbor. C. UDLD moved into aggressive mode after inconsistent acknowledgements were detected. D. The UDLD port is placed in the “unknown” state for 5 seconds until the next UDLD packet is received on the interface. Correct Answer: A https://www.mrcerts.com/300-115-test.html

  15. Offering Effective PDF Tests Training to Individuals and Companies 100% Money Back Guarantee on All Dumps Special Student Discount Available Printable and Searchable PDF Braindumps User Interactive Exams Software Get Free Live Updates Exams Software Real Exam Environment Like Actual Tests 3 Months Free Update Service Actual Exam Questions with Answers https://www.mrcerts.com/300-115-test.html

More Related