1 / 23

Unit 3.1: Minerals

OLD GEOLOGISTS NEVER DIE…. Unit 3.1: Minerals. I. Characteristics of Minerals. CaTiO 3. CsCl. Minerals have five characteristics: Inorganic : from physical processes, not living organisms There are a few exceptions Natural : not man-made

dash
Download Presentation

Unit 3.1: Minerals

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. OLD GEOLOGISTS NEVER DIE… Unit 3.1: Minerals

  2. I. Characteristics of Minerals CaTiO3 CsCl • Minerals have five characteristics: • Inorganic: from physical processes, not living organisms • There are a few exceptions • Natural: not man-made • Ex: cubic zirconium is not a true mineral b/c man-made • Solid: not a liquid or a gas • Crystalline structure: the arrangement of atoms relative to all other atoms in a mineral • Chemicalcomposition: based on ratio of elements within the mineral

  3. Purpose of mineralogy: knowing the structure and composition of a mineral can tell you: • Physical properties of the mineral • **Where and how the mineral was formed** • How it can be used

  4. II. Crystal Formation • Two processes by which minerals crystallize: • Precipitation: when water evaporates, the minerals and salts that were dissolved in the water are left behind, form crystals. • If water evaporates quickly, then the crystals that form are smaller, contain more impurities (fast = smaller) • If water evaporates slowly, then allows larger, more pure crystals to form (slow = larger)

  5. Change in temperature: as temperatures decrease, causes liquids to condense into solids that can form a structured arrangement of minerals • Ex: ice forms a crystalline structure when liquid water cools. • Ex: magma (molten rock) cools to become igneous rock. • Slow drop in temperature allows larger crystals to form • Quick drop in temperature leads to smaller crystals

  6. Differences in Mineral Formation: • Difference in composition: if you change some of the ions while the mineral is forming, it can change some properties of the mineral • Ions of similar size are interchangeable, yield range of colors • Sometimes “impurities” can cause variations in minerals

  7. Differences in structure: if you change the arrangement of the elements, you’ve changed the mineral. • Called polymorphs: same element but different arrangement of atoms • “poly” = many; “morphs” = forms • Also called “allotropes” • For example: carbon has 3 polymorphs • Diamond: hard b/c all covalent bonds • Graphite: soft b/c layered sheets, weak electrical bonds • Buckminsterfullerene (C60): also called “buckyballs”

  8. Mineral Classes All minerals made up of only 8 elements: O, Si, Al, Fe, Ca, Na, K, Mg Silicates: SiO44- Non-Silicates Light-colored Dark-colored Oxides O2- Carbonates CO32- No Fe or Mg Because Fe and/or Mg SO42- Sulfates Less dense; makes up continental crust More dense; makes up oceanic crust Sulfides S2- Halides Br-, Cl-. F- Au, Ag, Sn, Pb, Fe Native Elements

  9. III. Mineral Classes • Over 4000 known minerals but all are made up of only 8 elements: • O • Si • Al • Fe • Ca • Na • K • Mg

  10. Can be divided into two broad categories: • Silicates: SiO44-; most common • Negatively charged, so attracted to… cations! • Silicate ion forms a tetrahedral structure; different minerals arrange the silicate tetrahedron in different ways • Nonsilicates: not silicon-based

  11. Amphibole Olivine Pyroxene Biotite C. Silicates can be subdivided into twoclasses: • Dark-colored: contain Iron (Fe) and/or Magnesium (Mg) • Fe and Mg are denser (and darker) elements so these silicates are “heavier”; commonly found in oceanic crust • Examples: • Olivine: simple tetrahedral arrangement • Pyroxene: tetrahedra form single chains • Amphibole: tetrahedra form double chains • Biotite: tetrahedra form “sheets”

  12. Clay Feldspar Quartz Muscovite • Light-colored: do not contain Iron or Magnesium • These silicates are not as dense, so not as heavy • Commonly found in continental crust • Examples: • Feldspar (most common) • Quartz • Muscovite • Clay

  13. D. Nonsilicates do not build on silicon, are less common, but are important economically. • Six classes of nonsilicates: • Oxides: O2-; ex: for mining ores of iron • Carbonates: CO32-; used in cement • Sulfates: SO42-; used in plaster • Sulfides: S2-; for mining ores of lead, zinc, copper, mercury • Halides: Cl1-, F1-, Br1-; for making salt, fertilizer • Native elements: Au, Ag, Sn, Pt; used for jewelry, electrical conductors, trade/currency, medicines

  14. IV. Eight Properties of Minerals • Luster: how it reflects light • Depends on smoothness of surface at the atomic level • Characterized as: • Metallic (shiny) • Nonmetallic • Glassy • Earthy • Pearly • Silky • Waxy

  15. Color: results from absorption and reflection of wavelengths of light • Arrangement of atoms determines how light passes through and interacts with the atoms in the mineral. • Color can be misleading due to impurities: • “Quartz” has many different colors depending on which cations bind to the tetrahedron.

  16. Streak: color of the residue when scratched onto tile plate • Much more reliable indicator than color: two minerals that look “black” will “streak” their true color • Two quartz minerals may be different colors, but will have same streak • Hardness: resistance to scratching • Depends on the type of bonding that holds the minerals together: • Minerals held together by covalent bonds are harder than those held together by ionic bonds b/c covalent bonds holds atoms closer together • Mohs hardness scale rates this: • Diamond is hardest mineral = 10 • Graphite is softest mineral = 1

  17. Density: the mass of a mineral contained within a certain volume • Depends on how tightly the atoms are packed: • If packed tightly, then more dense • If packed loosely, then less dense

  18. Gold: SG of 20 Fool’s Gold: SG of 5 • Specific Gravity: compares the mass of a mineral to an equal mass of water • Depends on atomic weights and how tightly atoms are packed: • Tighter packing = higher specific gravity • Examples: • Specific gravity of 24K gold is 20 • Specific gravity of most rock-forming minerals is 2.5

  19. Crystal Faces: flat, smooth exterior surfaces that are characteristic of each mineral. • Depends on the arrangement of the atoms that make up the mineral • Salt: cuboidal • Garnets: dodecahedrons (12-sided) • Magnetite: octahedron (8-sided) • Even if the shape is not geometric, each mineral still has a characteristic shape that helps to identify it.

  20. Cleavage: the planes along which a crystal breaks and the shape of the resulting fragments • Crystal breaks where bonds are weakest, depends on how/where atoms are bonded. • Silicon tetrahedra arrangement allows us to predict type of cleavage: • Simple = no cleavage • Single chain = 90° cleavage • Double chain = 60° and 120° • Sheets = …sheets

  21. Fracture: when a mineral breaks irregularly, not along a plane • Does not result in a regular, predictable, characteristic shape, so not a “true” property of minerals • Can be irregular or conchoidal: • Conchoidal: bowl-shaped fracture

  22. Warm-up answers for this unit:

  23. Warm-up answers for this unit:

More Related