1 / 11

Mechanics of Materials – MAE 243 (Section 002) Spring 2008

Mechanics of Materials – MAE 243 (Section 002) Spring 2008. Dr. Konstantinos A. Sierros. 7.5: Hooke’s law for plane stress.

Download Presentation

Mechanics of Materials – MAE 243 (Section 002) Spring 2008

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Mechanics of Materials – MAE 243 (Section 002) Spring 2008 Dr. Konstantinos A. Sierros

  2. 7.5: Hooke’s law for plane stress • Materials that meet two important conditions: 1) The material is uniform throughout the body and has the same properties in all directions (ie homogeneous and isotropic) and 2) The material follows Hooke’s law (ie is linearly elastic) • For example the strain εx in the x direction due to the stress σx is equal to σx/E where E is the modulus of elasticity. But we also have a strain εx due to the stress σy and is equal to -v σy / E where v is the Poisson’s ratio (see section 1.5) • Also revise section 3.6

  3. 7.5: Hooke’s law for plane stress • Special cases of Hooke’s law • Biaxial stress: σx = σy = 0 • Uniaxial stress: σy = 0 • Pure shear: σx = σy = 0, εx = εy = εz = 0 • and γxy = τxy / G • Volume change: The change in volume • can be determined if the normal strains • In the three perpendicular directions • Strain – Energy density in plane stress • Revise sections 2.7 and 3.9

  4. 7.6:Triaxial stress • State of triaxial stress • Since there are no shear stresses on the x,y and z faces, the stresses σx ,σy, σz are the principal stresses • If an inclined plane parallel to the z axis is cut through the element (fig 7-26b), the only stresses on the inclined face are the normal stress σ and shear stress τ, both of which act parallel to the xy plane

  5. 7.6:Triaxial stress • The stresses acting on elements oriented at various angles to the x, y and z axes can be visualized using the Mohr’s circle. • For elements oriented by rotations about the z axis, the corresponding circle is A • For elements oriented by rotations about the x axis, the corresponding circle is B • For elements oriented by rotations about the y axis, the corresponding circle is C

  6. 7.7: Plane strain • If the only deformations are those in the xy plane, then three strain components may exist – the normal strain εx in the x direction (fig 7-29b), the normal strain εy in the y direction (fig 7-29c) and the shear strain γxy (fig 7-29d). An element subjected to these strains (and only these strains) is said to be in a state of plane strain • It follows that an element in plane strain has no normal strain εz in the z direction and no shear strains γxz and γyz in the xz and yz planes respectively • The definition of plane strain is analogous to that for plane stress

  7. 7.7:Transformation equations for plane strain • Expression for the normal strain in the x1 direction in terms of the strains εx, εy , εz • Similarly the normal strain εy1 in the y1 direction is obtained from the above equation by setting θ = θ+90

  8. 7.7:Transformation equations for plane strain • we also have… …which is an expression for the shear strain γx1y1 Transformation equations for plane strain

More Related