1 / 9

How limestone sealing can prevent the floor from getting stained

In this power point presentation you can easily find out how limestone sealing can prevent the floor from getting stained.

crikeyconcretepainters
Download Presentation

How limestone sealing can prevent the floor from getting stained

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. How limestone sealing can prevent the floor from getting stained By CrikeyConcrete painter

  2. The problem is not because of the limestone. It is because of the loose grout. Loose Grout

  3. There might be some movements in the sub-floor. Sometimes, a void is created under a tile. This often loosens the grout. • The second cause of loose grout is uneven adhesive. This also leaves voids under tiles. • When there are no voids under tiles then this problem is because you never applied limestone sealing or the seal is worn down. Causes of Loose Grout

  4. Spills seeped into the limestone tile gives it the grimy, dirty and dull appearance. Even when you try to be careful, liquids are often spilled on the floor. Causes of Dirty and Grimy Floor

  5. Stains and marks on the floor due to spills can be removed by re-honing the floor. However, the floor will again get dirty and grimy looks due to the spills. Therefore, the best solution is to prevent spills from seeping into the tile. This is what limestone sealing does. Solution

  6. The floor is looking etched because you have used harsh chemical to clean tiles. These chemicals often cause stains on the floor. In order to remove stains, you once try some other harsh chemical based cleaning agent. And, this vicious cycle goes on. Avoid Harsh Chemicals

  7. Before restoration, it is important to locate the source of the problem. Professionals perform a hammer test for identifying voids under the floor. Here, you need not replace the entire floor. You just need to fill voids under tiles. Restore the Floor

  8. Voids are filled by drilling holes in the grout. After that, a product is injected through these holes to fill the voids. After 12 to 15 hours, the hammer test is once again performed to make sure that void is completely filled. Limestone sealing will prevent floor from getting stained due to spills. Fill Voids and Seal the Floor

  9. Website: http://www.crikeyconcretepainter.com.au/ Phone: 0414309387 Contact Us

More Related