1 / 12

Station Metadata: What do I Need?

Station Metadata: What do I Need?. Dr. Mary Templeton IRIS Data Management Center Data Management Workshop Bogotá, Colombia July 2014. Why is Metadata Important?. To use data, you need to know where and how it was recorded: x,y,z,t How do you translate the time series to ground motion?

cricket
Download Presentation

Station Metadata: What do I Need?

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Station Metadata:What do I Need? Dr. Mary Templeton IRIS Data Management Center Data Management Workshop Bogotá, Colombia July 2014

  2. Why is Metadata Important? • To use data, you need to know where and how it was recorded: • x,y,z,t • How do you translate the time series to ground motion? • Direction • Amplitude scaling • Phase shifting • The data format must be understood • Metadata is easiest to record before it’s forgotten

  3. Steps for Building Metadata • Register your network and station names • Create a dataless SEED volume • Enter network information • Enter information for a single station • Add additional stations using the first as a “clone”

  4. What do I Need? • Network information • FDSN network code • Network name • Operating institution

  5. What do I Need? • Station information • Registered station code • Station long name • Location of the station and it’s sensors • Latitude (degrees from -90 to +90) • Longitude (degrees from -180 to +180) • Elevation (ground surface and sensor in m) • Depth (surface elevation – sensor elevation in m)

  6. What do I Need? • Station information • Sensor channel orientations • Angle from magnetic north to each horizontal channel (degrees from 0 to 360) • Sensor wiring convention • Normal: upward ground motion produces a positive Z amplitude (similar for N and E) • Reverse: upward ground motion produces a negative Z amplitude (industry geophones)

  7. What do I Need? • Station information • Sample rates • Sensor long-period corner • Sensor gain

  8. What do I Need?

  9. What do I Need? • Station information • Instrument response • Sensor • Sensitivity • Poles and zeros • A0 normalization factor • Datalogger • Preamplifier gain • Bit weight (A/D scale factor) • FIR coefficients for your field acquisition settings • other

  10. What do I Need? • Station information • Optional • Text description of instrumentation • Instrument serial numbers • Comments documenting timing and other data problems

  11. What do I Need? • And Finally…. • Time span (epoch) for which this information is valid • If any of this metadata changes, a new epoch need to be created with updated metadata • Epochs must not overlap in time

  12. About Instrument Responses • The bad news • This is can be the most difficult part of gathering station metadata • The good news • We’ve created a response library to make this easier • More about this after the break!

More Related