1 / 9

Collector Feedback Bias

Collector Feedback Bias. ELEC 121. BJT Biasing 4. For the Collector Feedback Bias Configuration: Draw Equivalent Input circuit Draw Equivalent Output circuit Write necessary KVL and KCL Equations Determine the Quiescent Operating Point Graphical Solution using Loadlines

crevan
Download Presentation

Collector Feedback Bias

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Collector Feedback Bias ELEC 121

  2. BJT Biasing 4 For the Collector Feedback Bias Configuration: • Draw Equivalent Input circuit • DrawEquivalent Output circuit • Write necessary KVL and KCL Equations • Determine the Quiescent Operating Point • Graphical Solution using Loadlines • Computational Analysis • Design and test design using a computer simulation ELEC 121

  3. DC Bias with Collector (Voltage) Feedback Another way to improve the stability of a bias circuit is to add a feedback path from collector to base In this bias circuit the Q-point is only slightly dependent on the transistor  ELEC 121

  4. Base – Emitter Loop Solve for IE Applying Kirchoff’s voltage law: -VCC + IERC + IBRB + VBE + IERE = 0 Since IE = ( + 1) IB then: Simplifying and solving for IE: ELEC 121

  5. Collector Emitter Loop Applying Kirchoff’s voltage law: IE RE + VCE + ICRC – VCC = 0 Since IC= IE and IE = ( + 1) IB: IE(RC + RE) + VCE – VCC =0 Solving for VCE: VCE = VCC – IE (RE + RC) ELEC 121

  6. Network Example ELEC 121

  7. Network Example ELEC 121

  8. Collector Feedback with RE = 0 ELEC 121

  9. Design of CE Amplifier with Collector Feedback Bias • Select a value for VCC • Determine the value of  from spec sheet or family of curves • Select a value for IEQ • Let VCE = ½ VCC (typical operation, 0.4 VCC≤ VC≤ 0.6 VCC) • Let VE = 0.1 VCC(for good operation, 0.1 VCC≤ VE≤ 0.2 VCC) • Calculate RE, RC and RB ELEC 121

More Related