1 / 23

Personal Protective Equipment

Personal Protective Equipment. Personal Protective Equipment. General Requirements 1926.95 This regulation requires employers to ensure that personal protective equipment "be provided, used, and maintained in a sanitary and reliable condition wherever it is necessary…" to prevent injury.

crete
Download Presentation

Personal Protective Equipment

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Personal Protective Equipment

  2. Personal Protective Equipment • General Requirements 1926.95 • This regulation requires employers to ensure that personal protective equipment "be provided, used, and maintained in a sanitary and reliable condition wherever it is necessary…" to prevent injury. • Employer shall assure that all PPE is adequate and of a safe design and construction.

  3. Personal Protective Equipment • Employers must protect employees from workplace hazards such as machines, hazardous substances, and dangerous work procedures that can cause injury • Employers must: • Use all feasible engineering and work practice controls to eliminate and reduce hazards • Then use appropriate personal protective equipment (PPE) if these controls do not eliminate the hazards. • Remember,PPE is the last level of control!

  4. Engineering Controls If . . . The machine or work environment can be physically changed to prevent employee exposure to the potential hazard, Then . . . The hazard can be eliminated using an engineering control.

  5. Engineering Controls (cont’d) • Initial design specifications • Substitute less harmful material • Change process • Enclose process • Isolate process • Ventilation Examples . . .

  6. Work Practice Controls If . . . Employees can be removed from exposure to the potential hazard by changing the way they do their jobs, Then . . . The hazard can be eliminated using a work practice control.

  7. Work Practice Controls (cont’d) • Using wet methods to cut concrete • Personal hygiene • Housekeeping and maintenance • Job rotation of workers Examples . . .

  8. Personal Protective Equipment • Eye & Face protection - safety glasses, goggles, face shields • Head protection - hard hats • Foot protection- safety shoes • Hand & Arm protection - gloves • Hearing conservation - earplugs, earmuffs • Body protection – aprons, vests, coveralls • Respiratory protection – APR, PAPR, SAR, SCBA

  9. Establishing a PPE Program • Sets out procedures for selecting, providing and using PPE as part of an employer’s routine operation • First -- assess the workplace to determine if hazards are present, or are likely to be present, which necessitate the use of PPE • Once the proper PPE has been selected, the employer must provide training to each employee who is required to use PPE

  10. Training • When PPE is necessary • What type of PPE is necessary • How to properly put on, take off, adjust, and wear • Limitations of the PPE • Proper care, maintenance, useful life and disposal Employees required to use PPE must be trained to know at least the following:

  11. Personal Protective Equipment • 29 CFR 1926.102 Eye protection • Where possible danger of injury from: • physical (particulates, flying objects) • chemical (acids or caustics) • radiation agents (lasers, UV, infrared) • Must meet ANSI Z87.1 - 2003

  12. Personal Protective Equipment • 29 CFR 1926.100 Head protection • Where possible danger of head injury from: • impact, • falling or flying objects, • electrical shock and burns (non conductive) • Must meet ANSI Z89.2-1986

  13. Personal Protective Equipment • 29 CFR 1926.96 Foot protection • Where possible danger of foot injury • Heavy objects • Sharp objects • Hot or wet surfaces • ANSI Z41.1-1999 (Test Methods) • ASTM F2413-05 (Performance Criteria)

  14. Personal Protective Equipment • 29 CFR 1910.138 Hand protection • Employees shall use hand protection when hands are exposed to hazards. • ASTM F-1790 standard for cut protection performance • ANSI/ISEA 105-2000 chemical hand protection selection criteria • ASTM D 120-87, specification for rubber insulating electrical protective gloves

  15. Personal Protective Equipment • 29 CFR 1926.101 Hearing protection • Hearing protection required above 90 dB TWA • Hearing protection available at 85 dB TWA • Hearing protection will always have an assigned Noise Reduction Rating (NRR) • Hearing Conservation Program • Audiometric testing for employees • Baseline audiogram • Annual audiogram

  16. Personal Protective Equipment • 29 CFR 1926 Body protection • There are many specific OSHA standards that recognize hazards that require body protect. • Cuts, abrasions, and impacts from tools, machinery, or materials • Contact with Hazardous chemicals, or potentially infectious materials • Intense heat, Hot liquids • Radiation exposures

  17. Personal Protective Equipment • 29 CFR 1926.103 is identical to the 1910.134 Respiratory protection • Respirators shall be provided by the employer to protect the health of the employee • Respiratory protection may control occupational diseases caused by breathing air contaminated with harmful dusts, fogs, fumes, mists, gases, smokes, sprays, or vapors • The primary objective shall be to prevent atmospheric contamination

  18. Personal Protective Equipment • Respirator program requirements • Written program and evaluation • Training • Medical evaluation • Fit testing • Proper selection • Cleaning, disinfecting and storage • On going medical monitoring

  19. Personal Protective Equipment • Air purifying respirator (APR) • Chemical & mechanical filter cartridges • Combination mechanical filter / chemical cartridge • Gas masks • Powered air purifying respirators

  20. Personal Protective Equipment • Air purifying respirator (APR) • Requirements & Limitations • Oxygen must be > 19.5% • Use only compatible parts • Filters (for particulates) • Cartridges & Canisters (for gases or vapors) • No facial hair (beards and gross sideburns) • No alterations

  21. Personal Protective Equipment • Atmosphere or air supplying devices • Self contained breathing apparatus (SCBA) • Supplied air respirators (SAR) • Combination SCBA & supplied air respirators NOTE: Must be supplied with Grade D breathing air.

  22. Personal Protective Equipment • User fit checks • Prior to each use the wearer must perform a user fit check to ensure a good seal on the face piece. • Negative pressure fit check • Positive pressure fit check

  23. Summary Employers must implement a PPE program where they: • Assess the workplace for hazards • Use engineering and work practice controls to eliminate or reduce hazards before using PPE • Select appropriate PPE to protect employees from hazards that cannot be eliminated • Inform employees why the PPE is necessary and when it must be worn • Train employees how to use and care for their PPE • Require employees to wear selected PPE

More Related