1 / 14

Materials for Phase II collimators

Materials for Phase II collimators. Rib Stiffener, why molybdenum. Stiffener material requirements: Minimise own thermal distortion Low CTE High thermal conductivity Minimise deflection by the force in the midpoint link High Young’s modulus. X-deflection simulation.

coty
Download Presentation

Materials for Phase II collimators

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Materials for Phase II collimators LHC Collimators Phase 2 - Visit to Plansee 28th August 2008

  2. Rib Stiffener, why molybdenum • Stiffener material requirements: • Minimise own thermal distortion • Low CTE • High thermal conductivity • Minimise deflection by the force in the midpoint link • High Young’s modulus X-deflection simulation Active part where most of heat is deposited tends to deflect due to thermal gradient Stiffener linked in a midpoint to limit deflection of the active part Link Shafts, fixed points LHC Collimators Phase 2 - Visit to Plansee 28th August 2008

  3. Stiffener, why molybdenum Al-C-fiber composites LHC Collimators Phase 2 - Visit to Plansee 28th August 2008

  4. Stiffener made of Mo, old monolithic version LHC Collimators Phase 2 - Visit to Plansee 28th August 2008

  5. Stiffeners made of Mo, assembled by bolts and pins • How are the stiffners Long plates 15 x 47 x 1100 mm³ Thinner extremities Circular holes and slots Tolerance ~0.1 mm Threaded holes for cooling clamps Spacers Positioning system Bolts and pins LHC Collimators Phase 2 - Visit to Plansee 28th August 2008

  6. EBW EBW Stiffener, raw material • Overall dimension of long plate (mm) • ≥15 x 47 x 1100 • Standard dimensions by Plansee • 12.7 x 500 x 600 • 20 x 500 x 600 • Possibility of having customized production • Ideas to make it out of standard dimension plate for prototypes (4÷8 plates), eventually for series (~250 plates) • EB butt weld • Connect overlapped plates, bolted or riveted • Also • Spacers • Positioning system • Bolts and pins LHC Collimators Phase 2 - Visit to Plansee 28th August 2008

  7. Stiffener, machining • Recommended machining parameters • Plansee as possible supplier of finished components • Tolerances achievable • Extremity holes • Positioning system elements • Do you see any other issue not mentioned? LHC Collimators Phase 2 - Visit to Plansee 28th August 2008

  8. Brazing Brazing Contact CuNi GlidCop C-C Cooling coil, interest of using molybdenum Phase 1, implemented solution: • Phase 2, increased energy deposition. • Cooling capacity has to be increased • 6 x tubes ID8 mm • reduce contact thermal resistance • Geometrical stability has to be maintained • use material with optimised k/CTE • Ideal solution: • Cooling coil back-casted in M-CD block LHC Collimators Phase 2 - Visit to Plansee 28th August 2008

  9. Cooling coil, interest of using molybdenum • Cooling coil material for Ideal solution requires • Metallurgical compatibility with metal of the block • Avoid dissolution of the coil in the liquid metal • Avoid inconvenient inter-metallic phases at the interface • CTE matching with M-CD • Avoid distortion, residual stresses or debonding at the interface when solidifying and cooling from infiltration temperature • Gaps at the interface leads to poor thermal conduction and virtual leaks • Feasibility of the coil • Cooling coil materials believed to be good candidates from the first two points of view • For Cu-CD: molybdenum,niobium, tantalum • For Al-CD: zirconium (preliminary test program is in progress in cooperation with L. Weber EPFL including also stainless steel) LHC Collimators Phase 2 - Visit to Plansee 28th August 2008

  10. Cu-CD Al-CD Cooling coil, interest of using molybdenum • Molybdenum coil in Cu-CD block • CTE • Phase diagram • Feasibility of the coil LHC Collimators Phase 2 - Visit to Plansee 28th August 2008

  11. Cooling coil, interest of using molybdenum Liquid Cu would dissolve Ti or Zr tube ! LHC Collimators Phase 2 - Visit to Plansee 28th August 2008

  12. Cooling coil, interest of using molybdenum Mo, Nb and Ta have limited solubility in liquid Cu and do not form inter-metallic phases LHC Collimators Phase 2 - Visit to Plansee 28th August 2008

  13. Cooling coil, interest of using molybdenum • Feasibility of long intricate coil is a question mark. • ID 8 mm x L 3800 mm • Bending radius as small as 18 mm • Tests and trials • Tensile test at RT on molybdenum tube OD10xID8 (our CA1491024) • Rp0.2 = 570 MPa Rm = 685 MPa • A ≥ 40% !!! but transversally very low ductility • Inner wall of the tube is oxidised • Bending tests to be done at CERN workshop • What are your recommendations? • Butt welding, your recommendations LHC Collimators Phase 2 - Visit to Plansee 28th August 2008

  14. Cooling coil, vacuum related constrains • Avoid virtual leaks (confined volumes with low aperture that make long time to evacuate) • Avoid any welding or brazing between water and beam vacuum !  use of continuous seamless tube • Other solutions if the last constrain can be relaxed: • Cooling circuit machined in a block, closed by brazing or welding • Brazed to the main block • Back-casted inside the main block • Any other? • Any experience in similar large surface brazing LHC Collimators Phase 2 - Visit to Plansee 28th August 2008

More Related