Ucontrol Signal Conditioner Signal Converter Solutions

1. Ucontrol Signal Conditioner Signal Converter Solutions The signal conditioner or signal converter as it is more commonly referred to these days is still an essential device in most process control applications. Although DCS and PLC systems have advanced and now directly accept most process signals directly, very few provide a sufficient level of isolation and accommodate some of the more uncommonly used signals. Also expansion modules with Direct non linear signals with inbuilt isolation are still very expensive, so it can be a better option to have a third party signal conditioner or signal converter, plus if there is ever a mishap with voltage on the signal, the low cost signal converter or Signal Conditioner will be damaged and not the expensive PLC or DCS hardware.

2. Ucontrol propriety stock a large range of signal conditioner and signal converter products from simple fixed range units to devices with dip switch or PC programming and serial communications. For further information about our signal converter and signal conditioner range including datasheets and operation www.ucontrol.com.au . Contact Us Ucontrol Australia Address: Suite 401 / 15 Albert Avenue Broadbeach, Queensland 4218, Australia Telephone: 1300 459949 International: +61 430 555920 Fax: 03 8648 0647 Email: sales@ucontrol.com.au manuals, please visit our website