1 / 19

CHE/ME 109 Heat Transfer in Electronics

CHE/ME 109 Heat Transfer in Electronics. LECTURE 8 – SPECIFIC CONDUCTION MODELS. SOLUTIONS FOR EXTENDED (FINNED) SURFACES. FINS ARE ADDED TO A SURFACE TO PROVIDE ADDITIONAL HEAT TRANSFER AREA

connie
Download Presentation

CHE/ME 109 Heat Transfer in Electronics

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. CHE/ME 109 Heat Transfer in Electronics LECTURE 8 – SPECIFIC CONDUCTION MODELS

  2. SOLUTIONS FOR EXTENDED (FINNED) SURFACES • FINS ARE ADDED TO A SURFACE TO PROVIDE ADDITIONAL HEAT TRANSFER AREA • THE TEMPERATURE OF THE FIN RANGES FROM THE HIGH VALUE AT THE BASE TO A GRADUALLY LOWER VALUE AS THE DISTANCE INCREASES FROM THE BASE

  3. SOLUTIONS FOR FINS • BASIC HEAT BALANCE OVER AN ELEMENT OF THE FIN INCLUDES CONDUCTION FROM THE BASE, CONDUCTION TO THE TIP, AND CONVECTION TO THE SURROUNDINGS WHICH MATHEMATICALLY IS

  4. SOLUTIONS FOR FINS • FOR UNIFORM VALUES OF k AND h, THIS EQUATION CAN BE WRITTEN AS: • THE GENERAL SOLUTION TO THIS SECOND-ORDER LINEAR DIFFERENTIAL EQUATION IS: • AT THE BOUNDARY CONDITION REPRESENTED BY THE BASED CONNECTION TO THE PLATE: T = To AT x = 0, THE SOLUTION BECOMES:

  5. NEED ONE MORE BOUNDARY CONDITION TO SOLVE FOR THE ACTUAL VALUES THERE ARE 3 CONDITIONS THAT PROVIDE ALTERNATE SOLUTIONS INFINITELY LONG FIN SO THE TIP TEMPERATURE APPROACHES T∞: SOLUTIONS FOR FINS

  6. SOLUTIONS FOR FINS • SO THE FINAL FORM OF THIS MODEL IS AN EXPONENTIALLY DECREASING PROFILE • WITH THIS PROFILE, THE TOTAL HEAT TRANSFER CAN BE EVALUATED • CONSIDERING THE CONDUCTION THROUGH THE BASE AS EQUAL TO THE TOTAL CONVECTION

  7. SOLUTIONS FOR FINS • TAKING THE DERIVATIVE OF (3-60) AND SUBSTITUTING AT x = 0, YIELDS • THE SAME RESULT COMES FROM A CALCULATION OF THE TOTAL CONVECTED HEAT

  8. SOLUTIONS FOR FINS • FINITE LENGTH WITH INSULATED TIP OR INSIGNIFICANT SO THE TEMPERATURE GRADIENT AT x = L WILL BE • VALUES CALCULATED FOR C1 AND C2 USING THIS BOUNDARY CONDITION ARE

  9. SOLUTIONS FOR FINS • THIS LEADS TO A TEMPERATURE PROFILE OF THE FORM: • THE TOTAL HEAT FROM THIS SYSTEM CAN BE EVALUATED USING THE TEMPERATURE GRADIENT AT THE BASE TO YIELD

  10. SOLUTIONS FOR FINS • ALLOWING FOR CONVECTION AT THE TIP • THE CORRECTED LENGTH (3-66) APPROACH CAN BE USED WITH EQUATIONS (3-64 AND 3-65) • ALTERNATELY, ALLOWING FOR A DIFFERENT FORM FOR THE CONVECTION COEFFICIENT AT THE TIP, hL, THEN THE HEAT BALANCE AT THE TIP IS

  11. SOLUTIONS FOR FINS • THE RESULTING TEMPERATURE PROFILE IS • AND THE TOTAL HEAT TRANSFER BECOMES

  12. FIN EFFICIENCY • THE RATIO OF ACTUAL HEAT TRANSFER TO IDEAL HEAT TRANSFER WITH A FIN • IDEAL TRANSFER ASSUMES THE ROOT TEMPERATURE EXTENDS OUT THE LENGTH OF THE FIN • REAL TRANSFER IS BASED ON THE ACTUAL TEMPERATURE PROFILE • FOR THE LONG FIN

  13. FIN EFFICIENCY • SIMILARLY, FOR A FIN WITH AN INSULATED TIP: • FIN EFFECTIVENESS INDICATES HOW MUCH THE TOTAL HEAT TRANSFER INCREASES RELATIVE TO THE NON-FINNED SURFACE • IT IS A FUNCTION OF • RELATIVE HEAT TRANSFER AREA • TEMPERATURE DISTRIBUTION • CAN BE RELATED TO EFFICIENCY

  14. HEAT SINKSH • EXTENDED AREA DEVICES • TYPICAL DESIGNS ARE SHOWN IN TABLE 3-6 • TYPICAL LEVELS OF LOADING http://www.techarp.com/showarticle.aspx?artno=337&pgno=2

  15. OTHER COMMON SYSTEM MODELS • USE OF CONDUCTION SHAPE FACTORS TO CALCULATE HEAT TRANSFER • FOR TRANSFER BETWEEN SURFACES MAINTAINED AT CONSTANT TEMPERATURE, THROUGH A CONDUCTING MEDIA • FOR TWO DIMENSIONAL TRANSFER • THE SHAPE FACTOR, S, RESULTS IN AN EQUATION OF THE FORM Q`= SkdT

  16. SHAPE FACTORS • THE METHOD OF SHAPE FACTORS COMES FROM A GRAPHICAL METHOD WHICH ATTEMPTS TO DETERMINE THE ISOTHERMS AND ADIABATIC LINES FOR A HEAT TRANSFER SYSTEM • AN EXAMPLE IS FOR HEAT TRANSFER FROM AN INSIDE TO AN OUTSIDE CORNER, WHICH REPRESENTS A SYMMETRIC QUARTER SECTION OF A SYSTEM WITH THE CROSS-SECTION AS SHOWN IN THIS SKETCH

  17. TEMPERATURE PROFILES • THIS SKETCH SHOWS THE CORNER WITH ISOTHERMAL WALLS AT TEMPERATURES T1 AND T2 • TAKEN FROM Kreith, F., Principles of Heat Transfer, 3rd Edition, Harper & Row, 1973

  18. TEMPERATURE PROFILES • THIS SKETCH SHOWS THE CORNER WITH ISOTHERMAL WALLS AT TEMPERATURES T1 AND T2 • THE CONSTRUCTION IS CAN BE MANUAL OR AUTOMATED • n LINES ARE CONSTRUCTED MORE OR LESS PARALLEL TO THE SURFACES THAT REPRESENT ISOTHERMS • A SECOND SET OF m LINES ARE CONSTRUCTED NORMALTO THE ISOTHERMS AS ADIABATS (LINES OF NO HEAT TRANSFER) AND THE NUMBER IS ARBITRARY

  19. TEMPERATURE PROFILES • THE TOTAL HEAT FLUX FROM SURFACE 1 TO SURFACE 2, THROUGH m ADIABATIC CHANNELS AND OVER n TEMPERATURE INTERVALS IS: • THE SHAPE FACTOR IS DEFINED AS S = m/n, SO THE FLUX EQUATION BECOMES: . • GENERATION OF THE MESH IS THE CRITICAL COMPONENT IN THIS TYPE OF CALCULATION • .TABLE 3-5 SUMMARIZES THE VALUES FOR EQUATIONS FOR VARIOUS SHAPE FACTORS

More Related