1 / 8

and

and. *Bing is a registered trademark and is used here only editorially, to the benefit of the trademark owner, with no intent to infringe on the trademark. With the new Bing Maps integration… I t’s easier than ever before to create a network database

conan-ramirez
Download Presentation

and

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. and *Bing is a registered trademark and is used here only editorially, to the benefit of the trademark owner, with no intent to infringe on the trademark.

  2. With the new Bing Maps integration… It’s easier than ever before to create a network database as geo-spatially accurate as possible… Directly within OSPInSight. *Bing Maps is only available in MapInfo version 10.5 or newer.

  3. For example: Cable right-of-way, visible in Bing Existing cables in OSPInSight Adjust cable placement along otherwise difficult routes…

  4. Place poles accurately… Existing cable in OSPInSight Transmission towers, visible in Bing

  5. Correct building placement… Existing buildings in OSPInSight Actual building locations, visible in Bing

  6. Some comments to consider in regards to the accuracy of Bing maps … According to Microsoft Employee Richard Brudritt “Pushpins and polylines, polygons are defined using latitude/longitude coordinates, measured using the WGS84 spatial reference system. These coordinates represent an angle, measured at the center of the earth relative to the prime meridian and the equator. So, the distance covered by 1 degree (or 6 d.p. of a degree, if you prefer) depends where on the earth's surface you are. At the equator, where the distance along the earth's surface covered by one degree of longitude is greatest, 1 degree = approx 111.3km. So the "accuracy" of a pushpin coordinate given to 0.000001 of a degree corresponds to about 10cm. However, just because you're stating the coordinates with that degree of accuracy doesn't mean that they will be displayed with that degree of accuracy relative to, say, the satellite imagery map of the given location. There are inherent approximations in the data collection of any of the background map styles - satellite/road/or ortho-photo, which are captured at different resolutions from a variety of different data sources - which is why it's pretty pointless to state the coordinate location of a pushpin with very high accuracy, because it will exceed the accuracy of the background map anyway. There is no statement of "guarantee" of accuracy for Bing Maps- the accuracy is good enough for most consumer-mapping purposes, but I certainly wouldn't rely on it for a detailed specialist land survey, for example.”

  7. Remember… OSPInSight is only as accurate as your network database. Bing Maps can be a helpful tool in the critical process of adjusting your database to reflect reality. Use it. www.ospinsight.com

More Related