1 / 14

Low Power Implementation of Scan Flip-Flops

Low Power Implementation of Scan Flip-Flops. Chris Erickson Graduate Student Department of Electrical and Computer Engineering Auburn University, Auburn, AL 36849 Chris.Erickson@auburn.edu. Objectives. Scan flip-flop overview Ways to incorporate low power design Benchmark circuit Results.

Download Presentation

Low Power Implementation of Scan Flip-Flops

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Low Power Implementation of Scan Flip-Flops Chris Erickson Graduate Student Department of Electrical and Computer Engineering Auburn University, Auburn, AL 36849 Chris.Erickson@auburn.edu

  2. Objectives • Scan flip-flop overview • Ways to incorporate low power design • Benchmark circuit • Results

  3. Scan Flip-Flop Primary outputs Primary inputs Combinational logic Scan-out SO Scan flip- flops D’ D SO D 0 1 Scan enable SE DFF mux D’ SI Scan-in SI SE

  4. How does is work? Primary inputs Primary outputs Combinational logic Scan-out 100 FF=0 FF=0 FF=1 Scan-in 010

  5. SO D 0 1 DFF mux D’ SI SE Low power scan FF cell Low Power Scan Flip-Flop SO D DFF D’ mux SI SE Scan FF cell

  6. Validation of lpsff Q grounds upon entering scan-mode QS provides output to scan chain

  7. Benchmark Circuit • S5378 • 35 Inputs • 49 Outputs • Standard • 179 D-type flip-flops • 1775 Inverters • 239 Or gates • 765 Nor gates • Flattened/optimized • Scan FF • 967 complex gates • Low-Power Scan FF • 1152 complex gates

  8. Primary inputs Primary outputs Combinational logic Scan-out FF FF FF Scan-in Always Random Test Patterns Primary Input Patterns 55 h AA h All 1s All 0s Random but constant 1 Random but constant 2 All Random

  9. Gate Transitions 55h AAh All 1 All 0 Rand 1 Rand 2 All Rand

  10. Gate Events 55h AAh All 1 All 0 Rand 1 Rand 2 All Rand

  11. Average Power Consumption (uW) 55h AAh All 1 All 0 Rand 1 Rand 2 All Rand

  12. Power Reduction sff  lpsff * Only encountered if entering into scan mode and the system didn’t know to latch the input signals.

  13. Conclusion • Low Power Scan Chain can result in up to 35% power reduction. • Minimal 19% area overhead from standard scan chain flip-flop • Average power reduction of 20-30% if input signals are held static

  14. References • TSMC 0.25um process parameters • Mentor Graphics Leonardo for design synthesis • Auburn’s PowerSim3 used for power measurements – Created by : Jins Alexander

More Related