1 / 21

FOR THE JOB.

THE RIGHT TOOL. FOR THE JOB. Flaring/Swaging Tools. 1) Tools a) Swag tool 1) Used to expand the soft drawn copper tubing. Joins two pieces of the same size 2) Sizes, 3/16”, ¼”, 5/16”, 3/8”, ½”, ¾” 3) Swag joint a) Depth would be the diameter of the tubing

cloris
Download Presentation

FOR THE JOB.

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. THE RIGHT TOOL FOR THE JOB.

  2. Flaring/Swaging Tools • 1) Tools • a) Swag tool • 1) Used to expand the soft drawn copper tubing. Joins two pieces of the same size • 2) Sizes, 3/16”, ¼”, 5/16”, 3/8”, ½”, ¾” • 3) Swag joint • a) Depth would be the diameter of the tubing • b) Side clearance would be 1/1000” – 6/1000”

  3. Flaring/Swaging Tools • C) Tubing cutters/Constrictors • 1) Midget cutter is used for small diameter copper tubing or in tight places • 2) Cutter Constrictor • a) Constrictor wheel, used to make a constrictor joint for domestic application • 3) Constrictor Joint • a) Large and small tubing joined, example ½ inch to ¼ inch • 4) Tool Placement • a) Small roller to the end of large tubing • 5) Small Tubing Depth • a) Past constriction diameter of large tube

  4. Flaring/Swaging Tools • D) Pinch off Tool • 1) Pinches off process tube • a) Allowing for sealing of the system • b) Pinch off twice, leaving tool in place while sealing

  5. Flaring/Swaging Tools • E) Pinch Point • 1) Example – Cap tube into ¼ inch tube • 2) Normally used putting cap. tube into filter drier • a) Cap. Tube to Drier • 1) Cut cap. tube, score tube with a file, break by hand • 2) Put fingers on last ¼ inch, which prevents allow flow into cap. Tube • 3) Insert cap. tube to screen, back up ¼ inch

More Related