- 90 Views
- Uploaded on

Download Presentation
## PowerPoint Slideshow about ' Chapter 16' - cilicia-romeo

**An Image/Link below is provided (as is) to download presentation**

Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author.While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server.

- - - - - - - - - - - - - - - - - - - - - - - - - - E N D - - - - - - - - - - - - - - - - - - - - - - - - - -

Presentation Transcript

STOCK POLLUTION PROBLEMS

Extending the resource depletion model to incorporate pollution damage

Figure 16.1 The structure of the aggregate stock pollution model

Fossil fuel stock

Fossil fuel extraction

Production

Pollution flows

Capital

stock

Consumption

Clean-up or defensive expenditure

Environmental pressure

Utility

Pollution stocks

Welfare

The aggregate stock pollution model: notation model A = The concentration level of pollution M = pollution emissions Γ = Extraction and processing costs V = clean up expenditure F = reduction in pollution stock from cleaning up α = constant decay or assimilation rate of the pollution stock Other variables (U, C, R, M) defined as before

- E = index of environmental pressures or degradation
- higher E means worse environmental quality

U modelt = U(Ct, Et) [UC >0, UE<0] (16.1)

Et = E(Rt, At) [ER >0, EA>0] (16.2)

→ Ut = U(Ct, E(Rt, At) (16.3)

Qt = Q (Kt, Rt, E(Rt, At) (16.4)

Γt= Γ(Rt)

Ft=F(Vt) [FV > 0] (16.6)

Pollution stock accumulation model

- Equation 16.5 specifies that emissions depend upon the amount of resource use, R.
- By integration of equation 16.5 we obtain
- So for a pollutant which is not infinitely long-lived (α > 0) the pollution stock at time t will be the sum of all previous pollution emissions less the sum of all previous pollution decay, while for a perfectly persistent pollutant (α = 0) A grows without bounds as long as M is positive.

The optimisation problem: model

Select values for control variables Ct, Rt and Vt, for t = 0, ..., ∞, so as to maximise

subject to the constraints

The Hamiltonian: model

H = U(Ct, E(Rt, At))

+ Pt(–Rt)

+ ωt (Q[Kt, Rt, E(Rt, At)] – Ct – Г(Rt) – Vt)

+ t(M(Rt) – αAt – F(Vt))

First Order Conditions from the Hamiltonian - modelcan be rewritten as:

Interpreting the FOC model

UC,t = ωt (16.8a)

- A static efficiency condition: in each use to which a resource is put, the marginal value of the services from it should be equal to the marginal value of that resource stock in situ.
- In each period, the marginal utility of consumption UC,tmust be equal to the shadow price of capital ωt (prices are measured in units of utility here).
- The marginal net benefit of using one unit of output for consumption is equal to its marginal net benefit when it is added to the capital stock.

- 16.8d is a Hotelling dynamic efficiency condition for the resource net price
- Provided that the utility discount rate is positive, the resource net price must always grow at a positive rate.
- Note that the ambient pollution level does not affect the growth rate of the resource net price.

Equation 16.8f resource net price

- Equation 16.8f is a dynamic efficiency condition which describes how the shadow price of pollution, , must move along an efficient path.
- As this condition is not central to our analysis, and because obtaining an intuitive understanding of it is difficult, we shall consider it no further.

- A dynamic efficiency condition, which requires that each asset or resource earns a rate of return at all points in time that is equal to the social rate of discount.
- Dividing both sides of 16.8e by ω, we obtain
i.e. the return to physical capital (its capital appreciation plus its marginal productivity) must equal the social discount rate.

- A static efficiency condition: efficiency in clean-up expenditure
- ω is the shadow price of capital; the amount of utility lost when a unit of output is diverted from consumption or investment to clean-up expenditure.
- is the optimal value of one unit of ambient pollution (a negative quantity, as pollution is harmful)
- FV is the amount of pollution stock clean-up from an additional unit of clean-up expenditure.
- So the right-hand side, –FV, is the utility value gained from pollution cleanup when one unit of output is used for clean-up expenditure. This must be set equal to the value of utility lost by reducing consumption (or investment) by one unit.
- Equivalently, optimal pollution clean-up expenditure will be the level at which the marginal costs and the marginal benefits of clean-up are equal.

Equation 16.8b expenditure

First, rearrange Equation 16.8(b) to read as:

Gross Price(t) =tQR,t = Pt + tR,t - UE,tER,t - tQE,tER,t-tMR,t

or, suppressing time subscripts:

Gross Price =QR= P+R-UEER-QEER-MR

That is:

Gross Price = Net Price + Extraction cost + 3 Pigovian taxes applied to the stock and flow pollution externalities

The following slides show the steps building up to Figure 16.2, then Figure 16.2 itself.

Again, time subscripts on variables have been suppressed for simplicity.

Units of utility 16.2, then Figure 16.2 itself.

P+R

Marginal extraction cost

P

Net Price

Time, t

P+ 16.2, then Figure 16.2 itself.R-UEER-QEER

Units of utility

P+R-UEER

Pollution flow damage

P+R

P

Time, t

Figure 16.2 Optimal time paths for the variables of the pollution model

Gross Price =QR= P+R-UEER-QEER-MR

Units of utility

P+R-UEER-QEER

Stock damage

P+R-UEER

P+R

P

Time, t

Figure 16.3 Optimal ‘three part’ pollution taxes pollution model

Units of utility

Gross price

Note: All elements are in general time dependent

Stock damage tax

Pollution flow damage tax

Utility damage tax

Net Price + Extraction cost

Net price, Pt

Time, t

utility units pollution model

utility units

MC

MC (Social)

MB

MB = QR

MC (Private)

QR

Optimal tax

M

M*

M*

M

Notes: MC = MC (social) = P + R – UE ER - QE ER - MR

MC (private) = P + R

Optimal tax = – UE ER - QE ER - MR

MB = QR

Figure 16.4 Optimal taxes and the wedge between private and social costs.

A complication: variable decay of the pollution stock pollution model

- Throughout this chapter, we have assumed that the proportionate rate of natural decay of the pollution stock, α, is constant.
- That is, although a larger amount of decay will take place the greater is the size of the pollution stock, the proportion that naturally decays is unaffected by the pollution stock size (or by anything else).
- This assumption is very commonly employed in environmental economics analysis.
- However, this assumption is usually made for convenience and analytical simplicity.
- Whether it is reasonable or not depends on the problem under study.
- Often it will not be reasonable, because the rate of decay changes over time, or depends on the size of the pollution stock.
- Of particular importance are the existence of threshold effects, irreversibilities, and time lags in flows between various environmental media (as with greenhouse gases).

A complication: variable decay of the pollution stock (2) pollution model

- Another way of thinking about this issue is in terms of carrying capacities (or assimilative capacities, as they are sometimes called) of environmental media.
- In the case of water pollution, for example, we can think of a water system as having some pollution-assimilative capacity. This enables the system to carry and to continuously transform some proportion of these pollutants into harmless forms through physical or biological process.
- Our model has in effect assumed unlimited carrying capacities: no matter how large the load on the system, more can always be transformed at a constant proportionate rate.
- Whether this assumption is plausible is, in the last resort, an empirical question. However, there are good reasons to believe that it is not plausible for many types of pollution.
- Where the assumption of a constant decay rate is grossly invalid, it will be necessary to respecify the pollutant stock–flow relationship in an appropriate way.

An application of a stock pollution model to the problem of global climate change

- William Nordhaus – with various collaborators – has been developing a suite of integrated economic–scientific models to examine policy responses to global climate change.
- While being different from the model we have developed here in the way it is structured, in its degree of richness and complexity, and in many of its specifics, Nordhaus’s DICE (Dynamic Integrated model of Climate and the Economy) model shares much of the essence of the model developed above.
- It is an optimal growth model, augmented by the presence of a rather sophisticated science component that models emissions paths into greenhouse gas atmospheric concentrations, and then on into implied time paths for global mean temperature changes.
- Using the latest implementation of this model, DICE-2007, Nordhaus is able to estimate a global efficient emissions reduction schedule over time, and to suggest particular rates of carbon tax that would bring about an efficient outcome.
- The DICE model, along with some other models of global climate change and the body of work that has emanated from the IPCC, were looked at earlier in Chapter 9.

The DICE-2007 model of global warming global climate changeThe Structure of DICE

- DICE-2007 employs an optimal economic growth modelling framework, integrated with a science component which comprises a carbon cycle and a system of climate equations.
- The carbon cycle is based on a three-reservoir model calibrated to existing carbon-cycle models and historical data.
- The three reservoirs are the atmosphere, the upper oceans and the biosphere, and the deep oceans.
- Carbon flows in both directions between adjacent reservoirs. The mixing between the deep oceans and other reservoirs is extremely slow.

The DICE-2007 model of global warming global climate changeThe Structure of DICE (2)

- The climate equations include an equation for radiative forcing and two equations for the climate system.
- The radiative-forcing equation calculates the impact of the accumulation of GHGs on the radiation balance of the globe.
- The climate equations calculate the mean surface temperature of the globe and the average temperature of the deep oceans for each time-step. These equations draw upon and are calibrated to large-scale general circulation models of the atmosphere and ocean systems.
- In DICE-2007 model, the only GHG that is subject to controls is industrial CO2. This approach is taken as CO2 is the major contributor to global warming, and because other GHGs are likely to be controlled in different ways. Other GHGs (CO2 emissions from land-use changes, other well-mixed GHGs, and aerosols) are included as exogenous trends in radiative forcing.

The DICE-2007 model of global warming global climate changeThe Structure of DICE (3)

- CO2 emissions depend on:
- total output
- a time-varying emissions-output ratio
- an emissions-control rate.

- The emissions-output ratio is estimated for individual regions, and then aggregated to the global ratio.
- The emissions-control rate is determined by the climate-change policy being examined.
- The emissions abatement cost function is parameterized by a log-linear function calibrated to recent studies of the cost of emissions reductions.
- Projected damages from the economic impacts of climate change rely on estimates from earlier syntheses of the damages, with updates in light of more recent information.
- The basic assumption is that the damages from gradual and small climate changes are modest, but the damages rise nonlinearly with the extent of climate change.

The Baseline Case Using DICE global climate change

- Using consensus estimates of values for the key driving variables (such as growth of labour force, capital stock, technical change, emissions-to-output ratios, and so on) and assuming that no significant additional emissions reductions are imposed, one can use DICE-2007 to generate predictions about GDP, climate change, and the impacts of climate change over some suitable future span of time.
- These model inputs and outputs define what is called the baseline case. (Although Nordhaus does not use this term, such a baseline simulation is also known as a “Business As Usual” case.)

Some of the principal characteristics of the baseline case from a DICE-2007 simulation are:

- Rapid continued increase in CO2 emissions from 7.4 billion tons of carbon per year in 2005 to 19 billion tons per year in 2100.
- A rapid increase in atmospheric concentrations of CO2 from 280 parts per million (ppm) in preindustrial times to 380 ppm in 2005 and to 685 ppm in 2100.
- Measured mean global surface temperature in 2005 increased by 0.7°C relative to 1900 levels and is projected to increase by 3.1°C in 2100 relative to 1900, and by 5.3°C in 2200 relative to 1900.
- The climate changes associated with these temperature changes are estimated to increase damages by around 2.5 percent of global output in 2100 and by close to 8 percent of global output in 2200.
- The damages are likely to be most heavily concentrated in low-income and tropical regions such as tropical Africa and India.

Optimisation and Policy Analysis Using DICE from a DICE-2007 simulation are:

- One can run DICE-2007 in full optimising mode.
- This results in an idealised policy that can be called the “optimal” economic response, one that establishes a time profile of emissions control which maximises the global economic welfare function.
- Such a policy entails GHG emissions being reduced (below baseline levels) in a way that is efficient across industries, countries, and time.
- To obtain such an efficient policy outcome the marginal costs of reducing CO2 and other GHGs should be equalized in each sector and country.
- Furthermore, in every year the marginal abatement cost should be equal to the marginal benefit in lower future damages from climate change.

Optimisation and Policy Analysis Using DICE from a DICE-2007 simulation are:

- This optimal time profile of emissions control is of interest in itself.
- An important output of the optimal policy response run of DICE-2007 is an estimate of the “optimal carbon price,” or “optimal carbon tax.”
- This is the price on carbon emissions that balances the incremental costs of reducing carbon emissions with the incremental benefits of reducing climate damages.
- However, the optimal time profile of emissions also serves as a benchmark against which various alternative policy responses to global warming can be assessed.

Major Results from DICE Policy Analyses from a DICE-2007 simulation are:

- Efficient Policy Response
- Efficient emissions reductions follow a “policy ramp” in which policies involve modest rates of emissions reductions in the near term, followed by sharp reductions in the medium and long terms.
- For the efficient climate-change policy, the net present-value global benefit of the optimal policy is $3 trillion relative to no controls. This total involves $2 trillion of abatement costs and $5 trillion of reduced climatic damages.
- The economically optimal carbon price or carbon tax would be $27 per metric ton in 2005 in 2005 prices. For carbon dioxide (smaller by a factor of 3.67) the optimal tax is $7.40 per ton of CO2. The optimal carbon price would rise steadily over time, at a rate between 2 and 3 percent per year in real terms, to reflect the rising damages from climate change.
- The upper limit on the carbon price is determined by the price at which all uses of fossil fuels can be economically replaced by other technologies. This is cost of the backstop technology. DICE estimates this to have an upper limit of around $1,000 per ton of carbon over the next half century or so, falling thereafter at an unknown rate.

B. DICE: Alternative Policy Responses from a DICE-2007 simulation are:

- For most of the climatic-limits cases examined (such as adding a constraint that limits the atmospheric concentration of CO2 to two times its preindustrial level, or adding a constraint that limits the global temperature increase to 2.5°C), DICE finds that the net present value of global economic welfare is close to that of the optimal case.
- Moreover, the near-term carbon taxes that would apply to the climatic limits, except for the most stringent cases, are close to that of the economic optimum.
- All existing programmes fail to meet the efficiency criteria.
- DICE modeling results point to the importance of near-universal participation in programs to reduce greenhouse gases.
- A low-cost and environmentally benign substitute for fossil fuels would be highly beneficial. A low-cost zero-carbon technology would have a net value of around $17 trillion in present value because it would allow the globe to avoid most of the damages from climate change. No such technology presently exists, none of the mooted options is currently feasible, but the net benefits of zero-carbon substitutes are so high as to warrant very intensive research.

Steady-state outcomes: climate example from a DICE-2007 simulation are:

- UNFCCC: ‘The ultimate objective of this convention...is to achieve...stabilization of GHG concentrations in the atmosphere at a level that would prevent dangerous anthropogenic interference with the climate system’.
- There is no consensus as to what this level is, nor perhaps could there be, given the judgement that inevitably must surround the word ‘dangerous’.
- A widely held opinion among natural and physical scientists is that the target should be set at twice the pre-industrial concentration (i.e. at 560 ppm of CO2 or 1190 GtC in the atmosphere). Many climate-change research teams have employed this value for one of the scenarios they have investigated. Nordhaus’s DICE model simulations now suggest that imposing such a doubling as a constraint on our emissions behaviour is close to being economically optimal.
- More recently, a growing number of climate scientists are warning that if temperatures were to rise more than 2°C above 1900 mean levels, a ‘tipping point’ would be passed beyond which positive feedback effects would generate runaway warming, possibly leading to catastrophic outcomes. Many climate change modellers are now also looking at what kinds of emissions control programmes would satisfy the constraint that mean global temperature increases do not exceed that particular level.not necessarily the lowest cost one).

Steady-state outcomes: more generally from a DICE-2007 simulation are:

- Is the notion of a steady state useful, or even meaningful, in the context of the modelling framework we have been examining in Section 16,1, in which a long-lived stock pollutant is emitted as the result of combustion of a fossil fuel that is a non-renewable resource for which there is a finite total stock?
- Intuition suggests that it may not be. Looking back at the various 4-quadrant diagrams in Chapter 15, it is evident that nothing resembling a steady state is attained until the non-renewable resource is fully depleted, or until that resource ceases to be used for some reason other than simple exhaustion of the resource.
- Furthermore, our analysis in Chapter 14, demonstrated that if there is no substitute for such a non-renewable resource and that resource is essential in production, then a steady state will not be reached in any finite span of time.
- Thus, for the pollution model we have just been studying, the notion of a steady state is logically inconsistent and so not meaningful.

Substitution possibilities from a DICE-2007 simulation are:

- It seems rather implausible, though, to imagine that fossil fuels (or indeed any other non-renewable resource) have zero substitution possibilities.
- So if we wish to think about policy over indefinitely long spans of time, it is necessary to consider substitutes for non-renewables. Two alternatives suggest themselves.
- First, there is the category of backstop technologies.
- A second possibility is that economic activity might increasingly switch to using renewable resources in place of non-renewables.
- That suggests that one might generalise the model specified in Section 16.1 to version in which the production function is of the form Q = Q(R1, R2, K, E) where R1and R2denote non-renewable and renewable natural resources respectively.

16.4 A model of waste accumulation and disposal from a DICE-2007 simulation are:

- Deals with efficient emissions targets for stock pollutants where it is not necessary to take account of aggregate level resource stock-flow constraints.
- Ignoring such constraints appropriate where pollution derives from the extraction and use of some resource on a scale sufficiently small that a resource stock constraint is not binding.
- We call these ‘local’ models of stock pollution.
- Typically more disaggregated than the models previously examined in this chapter.

Local models of waste accumulation and disposal from a DICE-2007 simulation are: These models best thought of as partial equilibrium cost–benefit analysis in a dynamic modelling framework. Variables now being measured in consumption units rather than in utility units, so appropriate rate of discount is r rather than ρ. We pay particular attention to the economically efficient steady-state outcome.

- Examples:
- pollution associated with the use of nitrates in agricultural chemicals
- discharges of toxic substances and radioactive substances
- various forms of groundwater and marine water contamination.

Nitrate pollution example from a DICE-2007 simulation are:

- There are benefits in terms of increased agricultural yields from using nitrate-based fertilisers.
- However, the application of nitrate fertilisers cannot be perfectly controlled, in the sense that only the precise amount taken up by the growing biomass is applied.
- Surplus-to-growth applications of fertiliser will eventually contaminate groundwater resources, or will via water runoff processes be transported into other local water systems, which will themselves be contaminated.

Nitrate pollution example from a DICE-2007 simulation are:

- M denotes quantity of fertiliser ‘emissions’
- B(M) denotes the total benefits of fertiliser use
- D denotes economic value of damages, expressed in terms of lost consumption-equivalent possibilities.
- As we dealing with stock pollutants, the damage caused by excess fertiliser applications depends on the concentration rate of the pollutant in relevant environmental receptors. So D = D(A).
- Stock-flow relationship between M and A: dA/dt = Mt – αAt where α is the decay rate of the pollutant.
- Seek to maximise the net present value of benefits less damages over some suitably defined interval of time.

16.4.1 The steady state from a DICE-2007 simulation are:

In a steady state, all variables are constant over time

- So dµ/dt in equation 16.12 will be zero.
- Time subscripts redundant and no longer necessary.
The two first-order conditions become

- dB/dM = -µ (16.13)
- dD/dA = -(R + α)µ (16.14)
In steady state the pollution-stock differential equationcollapses to

- M = αA (16.15)

16.4.1 The steady state from a DICE-2007 simulation are:

Combining equations 16.13, 16.14 and 16.15 we can obtain:

(16.17)

- An efficient solution requires that the present value of net benefit of a marginal unit of pollution equals the present value of the loss in future net benefit that arises from the marginal unit of pollution.
- Intuition given on next slide.

Intuition from a DICE-2007 simulation are:

- The term on the LHS is the increase in current net benefit that arises when the rate of emissions is allowed to rise by one unit. This marginal benefit takes place in the current period only.
- The term on the RHS is the present value of the loss in future net benefit that arises when the output of the pollutant is allowed to rise by one unit.
- dD/dA lasts for ever; it is a form of perpetual annuity.
- To obtain the present value of an annuity, we divide its annual flow, dD/dA, by a relevant discount rate
- This discount rate is the sum of r and α: the greater is the rate of decay, the larger is the ‘effective’ discount rate applied to the annuity and so the smaller is its present value.

Special cases from a DICE-2007 simulation are:

This is a transformed version of (16.17).

Four special cases

- Case A: r = 0, α > 0
- Case B: r > 0, α = 0
- Case C: r > 0, α > 0
- Case D: r = 0, α = 0

Case A from a DICE-2007 simulation are:r = 0, α > 0

- With no discounting , an efficient steady-state rate of emissions for a stock pollutant requires that the contribution to benefits from a marginal unit of pollution flow be equal to the contribution to damage from a marginal unit of pollution flow.

Case C: r > 0, α > 0 from a DICE-2007 simulation are:

- The marginal equality we noted in Case A (the contribution to benefits from a marginal unit of pollution flow be equal to the contribution to damage from a marginal unit of pollution flow) remains true but in an amended form (to reflect the presence of discounting at a positive rate).
- Discounting, therefore, increases the steady-state level of emissions.
- This is because a larger value of r reduces the present value of the future damages that are associated with the pollutant stock.

Case from a DICE-2007 simulation are:B: r > 0, α = 0 and Case D: r = 0, α = 0

- Given that α = 0, cases B and D are each one in which the pollutant is perfectly persistent – the pollutant does not decay to a harmless form.
- No positive and finite steady-state level of emissions can be efficient.
- The only possible steady-state level of emissions is zero.
- If emissions were positive, the stock would increase without bound, and so stock-pollution damage would rise to infinity.
- The steady-state equilibrium solution for any value of r when α = 0, therefore, gives zero emissions.
- The pollution stock level in that steady state will be whatever level A had risen to by the time the steady state was first achieved. Pollution damage continues indefinitely, but no additional damage is being caused in any period.
- Any activity generating perfectly persistent pollutants that lead to any positive level of damage cannot be carried on indefinitely.

b from a DICE-2007 simulation are:

a

c

d

Figure 16.5 Steady state solution and dynamics of the waste accumulation and disposal model.

Download Presentation

Connecting to Server..