1 / 13

ITS TGeo geometry Status and challenges

ITS TGeo geometry Status and challenges. By Bjørn S. Nilsen The Ohio State University. http://www.to.infn.it/~tosello/EngMeet/ITSdraw/ http://www.to.infn.it/~tosello/EngMeet/EngMeet.html. Contents. Status of Central Barrel SPD SDD SSD Thermal shields Status of RB24 & RB26 side

cicero
Download Presentation

ITS TGeo geometry Status and challenges

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. ITS TGeo geometryStatus and challenges By Bjørn S. Nilsen The Ohio State University

  2. http://www.to.infn.it/~tosello/EngMeet/ITSdraw/ http://www.to.infn.it/~tosello/EngMeet/EngMeet.html Contents • Status of Central Barrel • SPD • SDD • SSD • Thermal shields • Status of RB24 & RB26 side • Support cones • Cables, cooling tubes, and ducts • Patch panels, cable trays, and Shoe boxes • ITSAMS system • Material Definitions • Service code • Step manager • Module decoding routines • Simplified geometry for fast display

  3. Central Barrel Requirements/Rules • Sensitive volume must have thin direction in Direction • Z direction || to ALICE Global Z direction • Must follow ALICE naming and numbering conventions • Sensitive volume name ITS1, ITS2, ITS3, ITS4, ITS5, & ITS6. • Note, layer, Ladder, and Detector numbering schema not allowed (does not follow ALICE standards). • Follow hardware conventions when ever possible • Avoid inversion • Use measured positions when known • Make Detectors repositionable independent of other non-sensitive objects • Make volume/object names meaningful • Note, location of non-sensitive material known to about 1mm absolute only.

  4. SPD Central Barrel http://alice.pd.infn.it/latestdr/index.html • SPD Carbon Fiber Sector • Half staves  • Ladder • Grounding shield • Pixel detector • bump bonds • Read out chip • Kapton/Al cable • Stave end chips • Solder joints • Mounting clip  • Cooling tubes  • Thermal Shield

  5. 2 SDD ladders : SDD Central Barrel http://www.to.infn.it/~giraudo/disegni.html • Ladder  • Detector  • Sensitive volume ? • Front end  • Capacitors • Chips ? • Kapton/AL cables  • Thermal Shield  • Cooling tubes  • Ladder end electronics ? • Ladder end cables & tubes ? • Ladder Support Ring ?

  6. SSD Central Barrel http://www.to.infn.it/~tosello/EngMeet/ITSdraw/SSD/SSD_drawings.html • Ladder  • Detector  • Sensitive volume ? • Front end  • Capacitor ? • Chips ? • Cooling tube  • Kapton/Al cables  • Ladder end electronics ? • Ladder Support ring  • Thermal shield  • Al-Mylar outer shield 

  7. SPD Services details RB24 Open side Very Old Calculation

  8. Support Cone (copy needed) Kapton/Al Cables  Cable joints Cooling tubes  Cooling manifold  Cu block Soldered Cu tubes Patch Panels Connectors  Cables  Cable Trays (Guess) Cables  Shoe Boxes  Connectors Cables Electronics Support Cone Kapton/Al Cables  Cooling tube loops  Patch Panels Connectors  Cables  SPD Services RB26 Side Muon RB24 open Side • Cable Trays • Cables  • Shoe Boxes  • Connectors • Cables • Electronics

  9. Support Cone  Kapton/Al Cables  Cooling Tubes  Patch Panels  Connectors  Cables  Cable Trays (Guess) Cables  Shoe Boxes  Connectors Cables Electronics Support Cone  Kapton/Al Cables  Cooling Tubes  Patch Panels  Connectors  Cables  SDD Services http://alice-its.web.cern.ch/Alice-ITS/ RB24 Open side RB26 Muon side • Cable Trays  • Cables  • Shoe boxes  • Connectors • Cables • Electronics

  10. SSD Services http://alice-its.web.cern.ch/Alice-ITS/ RB24 Open side RB26 Muon side • Support Cone (old design) • Kapton/Al Cables  • Cooling Tubes  • Patch Panels  • Connectors  • Cables  • Cable Trays (Guess) • Cables  • Shoe Boxes  • Connectors • Cables • Electronics • Support Cone (old design) • Kapton/Al Cables  • Cooling Tubes  • Patch Panels  • Connectors  • Cables  • Cable Trays  • Cables  • Shoe boxes  • Connectors • Cables • Electronics

  11. ITSAMS/Other http://www.physics.ohio-state.edu/HIRG/ITSAMS/ • SSD cone wings  • Mirrors  • Patch panel  • Cable Tray  • Shoe Box  • TPC mounted Camera  • ITS-TPC Mounting Brackets  • FMD/T0 RB24/RB25 • Patch Panel  • Connectors  • Cables  • Cable Trays  • Cables  • Shoe Box  • Connectors  • Cables  • Electronics 

  12. Material Definitions http://www.to.infn.it/~tosello/EngMeet/ITSmat/SDD/0_SDDmat.html SDD • SPD Central • Dummy only • SDD Central • Mostly done • SSD Central • Partly done • Services • Dummy only StepManager (SDD only), Detector decoding

  13. Conclusion • Good start • Much new code still needs to be committed • Much work still to be done • SPD services a high priority for FMD and PMD background.

More Related