1 / 38

ROTARY CUTTING INSTRUMENTS OR DENTAL BURS

Dr. ROTARY CUTTING INSTRUMENTS OR DENTAL BURS. Set Induction: Discussing the definition, classification and types of r otary cutting instruments or dental burs used in dentistry. SERIES OF PROCEDURAL STEPS.

churst
Download Presentation

ROTARY CUTTING INSTRUMENTS OR DENTAL BURS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Dr. ROTARY CUTTING INSTRUMENTS OR DENTAL BURS

  2. Set Induction: Discussing the definition, classification and types of rotary cutting instruments or dental burs used in dentistry.

  3. SERIES OF PROCEDURAL STEPS • Following steps are involved in the finishing & polishing process in dentistry – • Bulk reduction • Cutting • Grinding • Finishing • Polishing

  4. What is bulk reduction • Is the removal of unwanted large portion or material of the tooth or appliances quickly. • Done by cutting & grinding instruments like – diamond points (and discs), carbide burs (& stones), steel burs & bonded abrasives.

  5. Bulk reduction by cutting • CUTTING is a removal of unwanted material for shaping, is done by using regularly shaped instruments with sharp edged blades • Instruments used are – tungsten carbide bur, steel bur or instrument in a blade like fashion • Cutting is done by • Hand cutting instruments • Rotary cutting instruments

  6. Hand cutting instruments • These instruments are used to cut hard or soft tissue of the mouth. • These have one, two or more regular shaped sharp cutting edges or points at one or both ends of stainless steel shafts • Cutting blades have different shapes, sizes & fixed at different angles at the neck of the shafts (denoted by instrument numbering)

  7. Hand cutting instruments are composed of three parts: handle, shank and blade

  8. Instruments , E. g – • Excavators, chisels, hoe, enamel hatches, gingival marginal trimmers, scalars to remove calculus deposits, Spoon excavator etc. • These instruments are to be maintained , sterilized & properly sharpened conditions before use

  9. Chisel: • Chisels are used for cutting enamel and dentin • A- Straight

  10. Hoe: It has the same uses of the chisel.

  11. Hatchet: • Also called enamel hatchet. • Used for cutting enamel and dentin and comes as right or left types for using on opposite sides of the cavity.

  12. Gingival margin trimmer:

  13. Spoon excavator: Spoon excavators (withcorresponding instrument formulas) • A-Binanglespoon (13-7-14) • B- Triple-anglespoon (13-7-14) • C- Spoon (15-7-14)

  14. Uses of Hand cutting instruments • For removing carious debris, damaged enamel, cutting & leveling enamel surfaces, producing cavosurfaces bevels etc during cavity preparations

  15. Rotary cutting instruments • These are known as dental burs , have small regular shaped sharp multiple cutting edges at the bur – head • This is connected to through neck (shank) to the steel shaft of the bur • The other end (shaft) is connected through latch or friction grip to air-rotar

  16. Air –rotar handpiece

  17. Definition • Bur is defined as a rotary cutting instrument, with cutting heads of various shapes & having two or more sharp edge blades, used as a rotary grinder. • E.G- Steel , carbide bur , diamond bur • ADA Specification No. 23 for dental excavating burs.

  18. Parts of Rotary Cutting Instruments • Three basic parts are • Head: is the cutting, polishing, or finishing portion. • Neck (shank) : Portion of the rotary instrument that connects the shaft to the head. • Shaft: Portion that fits into the air rotar hand piece. • Straight shaft • Latch type shaft • Friction grip shaft

  19. Shank Neck Head

  20. Burs classifications

  21. Burs - classified according to • Bur head material – diamond, tungsten carbide, silicon carbide, alumina, hardened steel. • Bur –head designs –number of teeth ,rake angle (+Ve, -ve, zero) • Rotation speed – low, medium, high, ultra high according to the cutting material

  22. Burs - classified according to • Mode of attachment to the hand piece, - straight, latch type or friction grip type. • Rotating mechanism - electrical motor, compressed air –turbine system , with or without cooling water stream or air jets • According to the length of their head - long, short or regular. • According to their shapes,- round, inverted cone, pear shaped, wheel shaped, tapering fissure, straight fissure, end cutting etc.

  23. Burs - classified according to • Clinical use – • Finishing of restorations • Surgical removal of bone • Cavity preparation. • Excavation of decay. • Trimming & finishing acrylic dentures. • Taking out old fillings (amalgam). • Tooth preparation for crown & bridges. • Separating crowns and bridges. • Implant procedures

  24. Dental burs • Dental steel burs • Tungsten Carbide burs • Diamond bur

  25. 1.Dental steel burs

  26. 1. Dental steel burs • Prepared by shaping & cutting a steel blank using fine diamond points • Three basic parts – head , neck , & shank • Bur head is small & has 6,8,10,12 sharp blades (teeth) • Bur head shapes,- round, fissure & inverted cone, flame , pear , wheel tapering fissure, straight fissure, cross cut fissure, end cutting etc.

  27. 2.Tungsten Carbide burs

  28. 2. Tungsten Carbides bur :- • Prepared by heating tungsten with carbon at high pressure & temp.1500*C , the abrasive powders are sintered & hot pressed on the metal shaft, the head is cut & shaped

  29. Uses of tungsten carbide bur • Commonly used for cutting, & finishing • Used for hard base metals & other alloy casting, reducing silver amalgam & composites restorations.

  30. 3.Diamond bur

  31. Diamond burs - Resinoid bonding • Abrasive particles like synthetic diamond chips are bonded through heat resistant polyamide resinoids, then cold pressed & cured . • For better retention , the matrix are electroplated with nickel & titanium nitride . Diamond burs

  32. Diamond bur uses • Cut excellently & are used for brittle & hard material like enamel, base metal alloy , cutting & forming tungsten carbide bur , steel burs • Diamond burs easily get clogged while cutting dentin

  33. Assignment :- • Definition of dental bur. • Classifications of dental burs. • Discriminate hand cutting instruments and rotary cutting instruments used in dentistry. • Types of dental burs used in dentistry.

  34. Mcq The hardest cutting tool is of :- • (a) Martensified carbon steel, • (b) Tungsten carbide, • (c) Silicon carbide • (d) Diamond points and discs…… • Ans- (d) Diamond points and discs.

  35. Mcq Bulk reduction of appliances is done by • (a) Hand cutting or mechanical rotary instruments, • (b) Abrasions, • (c) Glazing, • (d) Polishing. • Ans-(a) Hand cutting or mechanical rotary instruments.

  36. References: • Phillips Science of Dental Materials - Kenneth J. Anusavice. 12thedition.2013.p-231-253. • Science of Dental Materials –V Shama Bhat, B.T Nandish. 2nd edition.2013.p-325-327

More Related