1 / 20

Leonardo

Leonardo. Electronic automatic key-cutting machine for flat cylinder and vehicle keys, and cruciform keys*. *. *. * Keys to be cut only with the 4-sided clamp provided. Main Features Innovative and practical design Ergonomic Easy intuitive use Maximum precision in key cutting

chrisjohnson
Download Presentation

Leonardo

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Leonardo

  2. Electronic automatic key-cutting machine for flat cylinder and vehicle keys, and cruciform keys*. * * * Keys to be cut only with the 4-sided clamp provided

  3. Main Features • Innovative and practical design • Ergonomic • Easy intuitive use • Maximum precision in key cutting • Safe devices to safeguard the operator • Special devices to safeguard the internal parts of the machine • Conformity to CE standards

  4. Main Features Compact Fast key-cutting times Maximum quality key cutting Tolerance on copy for spaces and depths is +/- 0.05 mm 360 mm 395 mm 535 mm

  5. Main Features Four-sided clamps for housing a wide range of keys with different features. Keypad with retro-illuminated display: ergonomic and situated on the front. Automatic counting function of the cut keys at the end of each cutting cycle.

  6. Cutting Method Cutting of copies with the following functions: Copy from an original Copy with adjustments

  7. Cutting Method: Copy from an original For simultaneous reading of original keys and key cutting (approx. 25 sec. for flat keys with 5 pins). The optic reader makes it possible to simultaneously read the cutting profile and cut the key blank.

  8. Cutting Method: Copy with adjustments Used to make manual adjustments to very worn keys or to eliminate imperfections in the cutting depth and/or pitch of the original key. For reading original keys and cutting copies: approx. 25+25 sec. for flat keys with 5 pins.* * Excluding time needed by the operator to set up adjustments. Depth adjusting Spaces adjusting

  9. Technical Characteristics • Movements • Automatic movements on the X and Y axes. • Electronic movement control by step motor Software • Machine software with user friendly menu and advanced machine test functions. • RS232 serial port for connection to a personal computer for updating.

  10. Technical Characteristics Four sided clamps Four sided reading and cutting clamps for housing a wide range of flat cylinder and vehicle keys, and cruciform keys.

  11. Technical Characteristics Safety • Buzzer with different sounds for end of cycle (=cut key ready) and alarm status (=machine stopped, inspection required) • Semi-Transparent safety shield to protect the operator, with microswitch control. • Emergency stop push button conveniently situated on machine front.

  12. Technical Characteristics Work Area • Neon lamp to illuminate work area (“ON” with machine on). • Basic 9-key keypad, with retro-illuminated 4x20 character display. • Two side trays for excellent swarf collection.

  13. Technical features Optical reader Key reading by means of an electronic optic device: absolute precision and reliability in reading the key cuts; original key is protected as there is no contact with it.

  14. Main Features Semi-automatic Gauging System Leonardo has a semi-automatic gauging system for both the standard and semi-automatic clamps. This allows the operator to make the necessary adjustments in the event of discrepancies in tolerances, using a series of simple operations guided by instructions shown on the key-cutting machine display.

  15. Standard Accessories • Standard prismatic cutter in HSS steel • Full set of accessories for use and maintenance • Universal 4-sided clamp • Optional Accessories • Hard metal cutter • Automatic key loader

  16. Key Loader: Operates without compressed air. Special powered clamp to automatically secure the key to be cut; interchangeable with the basic four-sided clamp. Automatic detection of special clamp for the automatic loader. Cutting data storage. When the original key has been read, the machine stores the data in its memory so that any number of copies can be made. OPTIONAL

  17. OPTIONAL Automatic Loader Operating Characteristics • Dedicated device to ensure key stop position in the special clamp.

  18. OPTIONAL • Automatic Loader • Operating Characteristics • Key stacker for 20 to 30 keys (max.), adjustable according to key dimensions.

  19. OPTIONAL • Key Loader • Functions – Performance • Operation without compressed air. • Key stacker for 20 to 30 keys (max.), adjustable according to key dimensions. • Automatic removal device for single keys. • Special powered clamp, with automatic opening and closing to release/secure the key to be cut. • Mechanical slide for automatic collection of the cut keys.

More Related